Oprema za prašno lakiranje

ROMER Kompleksowe lakiernie proszkowe

Leto izdelave: 2020, Stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For ergonomic solutions in manual installations, we recommend suspended cross conveyors (cross transport). - In automated systems, chain conveyors are most commonly used. These run continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies producing various products simultaneously—for example, with multiple spray booths in different colors—flexible solutions with non-powered conveyors are used. This is the most expensive solution. All installations are custom-made to meet individual customer specifications. Continuous transport systems for overhead chain conveyors are designed and manufactured based on individual customer orders. In this system, floor conveyors can also be produced to carry items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross transporters) are specifically designed and manufactured to suit the requirements of individual installations. Use of a photoelectric sensor The use of a photoelectric sensor in the detail area enables length measurement and, consequently, allows gun activation when the part enters its range, and immediate deactivation after painting. The photoelectric sensor is standard equipment. Identification of details by means of special markings. Above the hanger, plates with identification holes are present. Based on this, the PLC controller, in conjunction with the photoelectric sensor, identifies the painted part and activates or deactivates the guns at the precise moment—thereby saving energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of a part. The PLC controller measures the time a part is expected to be inside the gun zone, allowing the guns to be turned on or off selectively. With light barriers equipped with multiple sensors horizontally and vertically. Lhsdpfxofz Dubs Aacsc This solution enables precise measurement of workpiece dimensions and thus also allows control of manipulators.

Stanje: novo, FSE lift repair kit for all types Lodpfx Asiwc Rljacjhc The assembly for height detection, object protection, and safety evaluation unit by Cedes has been discontinued by the manufacturer and can therefore no longer be procured as new. We have developed a replacement control unit for these devices, ensuring continued operation for years to come. In this context, we provide spare parts, such as the Cedes Safe C200 CAN, for immediate repair by our technicians—available on a loan basis and free of charge until the control unit is replaced. This allows the lift to remain operational and the control replacement to be scheduled accordingly. Of course, we can also repair and modernize all other dynamic storage systems. We are happy to provide you with a detailed quotation!

Leto izdelave: 2020, Stanje: novo, Transport systems Depending on the customer's requirements, transport systems can either be moved on the floor or suspended from rails. - For user-friendly solutions in manual installations, we recommend suspended cross transfers (transverse transport). - In automated systems, chain conveyors are most commonly used. They operate continuously without stopping and offer an excellent solution for companies focusing on process quality and repeatability. - For companies manufacturing a variety of items simultaneously, such as with multiple booths in different colors, flexible solutions using non-powered conveyors are utilized. This is the most expensive solution. All installations are custom-built according to customer specifications. Continuous transport systems for suspended chains are designed and manufactured based on individual customer orders. In this system, it is also possible to implement floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross-transfer units) are designed and manufactured to meet the specific requirements of individual installations. Lsdofz I Edspfx Aacehc Use of a Photoelectric Sensor The use of a photoelectric sensor in the item area allows for length measurement and thus enables the spray guns to be activated when the item enters their range, and switched off immediately after coating. The photoelectric sensor is a standard feature. Identification of items by means of special markers. Above each sling, there are plates with identification holes. Based on this, the PLC controller, in combination with the photoelectric sensor, detects the coated item and activates or deactivates the guns at the correct moment—saving both energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of an item. The PLC controller tracks the time the item should appear within the gun zone—enabling selective activation or deactivation of the spray guns. With light barriers featuring multiple horizontal and vertical sensors. This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Leto izdelave: 2020, Stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved along the floor or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an outstanding solution for companies focused on process quality and repeatability. - For businesses that manufacture different items simultaneously—such as operating multiple booths with different colors—flexible solutions using non-powered conveyors are employed. This is the most costly option. All installations are custom-built to suit customer requirements. Continuous transport systems for overhead chains are designed and manufactured according to individual client specifications. In this system, it is also possible to manufacture floor conveyor systems that carry items such as flower pots or rims (see photo). ROMER also produces overhead transport systems. Crossbeams (cross conveyors) are designed and manufactured to meet the requirements of specific installations. Use of a photoelectric sensor The use of a photoelectric sensor in the workpiece zone allows for length measurement and enables automatic switching of spray guns when the item enters their range, turning them off immediately after coating the item. The photoelectric sensor is included as standard equipment. Item identification is possible via special markings. Over the sling, there are plates with identification holes. Based on these, the PLC controller, in conjunction with the photoelectric sensor, detects the painted item and switches the spray guns on and off at the correct time, thus saving both energy and powder paint. Vertical workpiece shape detection. By using light barriers with horizontal detectors, the PLC control system can analyze the vertical shape of a workpiece. Ledpfxjfz Nb To Aacjhc The PLC calculates the time when the item is expected to appear in the spray booth, enabling selective activation or deactivation of the guns. With multi-sensor light barriers both horizontally and vertically arranged. This solution allows for precise measurement of workpiece dimensions, which also enables the control of manipulators.

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending sheet metal seams For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production. Lsdpfjdzqbljx Aacshc

Leto izdelave: 2020, Stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. Lhodpsfz U S Eefx Aacsc By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories Lhedponzpx Rofx Aacec -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, Linija za sendvič panele, streha 30,50,80,100 mm, stena 50,80 mm, fasada 50,100 mm Ledpexcinaefx Aacjhc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER Manufacturer: Rösler Ljdpev Idf Iefx Aacjhc Model: RDGE 800-4 Year of Manufacture: 2004 Belt Width: 800 mm Pass-Through Height: 550 mm Turbine Wheels: 4 units with frequency inverter Filter System: Wet filter system Including several infeed and outfeed conveyor belts. Including control cabinet, complete documentation, etc. Excellent condition! The machine is currently dismantled! WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width: 800 mm Inlet Height: 550 mm Turbine Wheels: 4 units with frequency inverter Filter: Wet filter system Supplied with multiple infeed and outfeed conveying belts Includes main electrical panel, complete documentation Very good condition! Machine is currently dismantled Price: Loaded on truck Warranty: 6-month functional and operational warranty if commissioned by DECK Sarl. Spare parts availability guaranteed for the next 10 years OPTIONAL: Delivery to your facility Assembly / Commissioning / Training Supervision by certified erection engineer We also supply spare parts for Rösler, Schlick, Wheelabrator, Gietart and other shot blasting machines! We can offer spare parts for Rösler, shot blasting machines!

Stanje: novo, Leto izdelave: 2022, Brand new power generator set, consisting of two gensets housed in a single enclosure, based on Scania engines. Synchronization with other generator sets or gensets is possible, and optionally also with the grid. Maximum power E.S.P. [kVA] / [kW]: 902.0 / 722.0 Lhodpfx Aasmrqi Ejcsc Rated power P.R.P. [kVA] / [kW]: 820.0 / 656.0 Controller type: ComAp InteliGen 500 Easy-to-use, intuitive graphical interface.