Pressta-Eisele Zarezna Žaga nakup rabljenega (3.758)

Leto izdelave: 1999, stanje: rabljeno, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Bjdpfx Asvmz R Sscmjlh Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Material stop swivels with locking points and digital display Notch height motorized adjustment with digital display Motorized angle adjustment with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Leto izdelave: 1997, stanje: rabljeno, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Blsdpfx Acsx Ecg Usmeh Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Material stop swivels with locking points and digital display Notch height motorized adjustment with digital display Motorized angle adjustment with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Leto izdelave: 2004, stanje: rabljeno, Najv. premer žaginega lista: 500 mm Območje reza do 80 x 200 mm Dolžina podajanja: maks. 800 mm z digitalnim prikazovalnikom Hitrost žaginega lista: 2 obr./min Števec kosov z avtomatskim izklopom ob doseženi nastavljeni vrednosti Brezstopenjsko nastavljiv pnevmatski podajalnik materiala Hidropnevmatski podajalnik žage Bljdoxn Iq Depfx Acmeh Pnevmatske vpenjalke materiala Naprava za pršenje Vključuje navodila za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxDxV) 1000 kg

Leto izdelave: 2016, stanje: rabljeno, Maks. premer žaginega lista: 350 mm Pnevmatski držalci materiala Mikro-razpršilna naprava Podajanje materiala z dvojnoročnim upravljanjem Bledpfxjzaqy To Acmsh Žagarska miza se lahko vrti v obe smeri Dolžinski naslon in valjčna proga na zahtevo

Leto izdelave: 2009, stanje: rabljeno, Premer žaginega lista navpično: 600 mm Premer žaginega lista vodoravno: 500 mm Širina izreza: pri 90° obdelavi profilov do 300 mm, konične poševnine do 30° Bledpfxjywtqdo Acmjh Največja višina profila: 280 mm Globina izreza: pri 90° vodoravno do 185 mm / pri 90° navpično do 230 mm Omejilnik materiala: vrtljiv 30° - 90° - 45° Vrtljiv omejilnik materiala z zaskoki in prikazom na zaslonu Programska krmiljenja za samodejno nastavitev višine reza, kotov in višine izreza Shranjevanje do 6 programov Hidropnevmatsko podajanje materiala preko dvoročnega upravljanja Pnevmatske vpenjalke za material Mazanje s hladilno tekočino

Leto izdelave: 2001, stanje: rabljeno, Premer žaginega lista navpično: 600 mm Premer žaginega lista vodoravno: 500 mm Širina izreza: pri 90° obdelavi profilov do 300 mm, konične poševnine do 30° Največja višina profila: 280 mm Globina izreza: pri 90° vodoravno do 185 mm / pri 90° navpično do 230 mm Naslon za material: vrtljiv 30° - 90° - 45° Naslon za material vrtljiv z zaskočnimi točkami in digitalnim prikazom Višina izreza motorizirano nastavljiva z digitalnim prikazom Bedoygkn Depfx Acmelh Motorizirano nastavljanje kotov z digitalnim prikazom Hidropnevmatski pomik materiala preko 2-ročnega upravljanja Pnevmatijske spone za material Mazanje s hladilnim sredstvom

Leto izdelave: 2009, stanje: rabljeno, Aluminium saw system with 2 saw motors, each capable of performing independent 45° cuts. Material feed unit with up to 8,100 mm capacity Cross conveyor, discharge table, chip conveyor, and extraction system included Soundproof enclosure Bedpfoqzmnuox Acmslh Controlled via Siemens S7 panel Operating manual and other documentation available; further technical data upon request The machine was operational until disassembly For further technical data, please inquire or refer to the photos

Leto izdelave: 1998, stanje: rabljeno, Longitudinal saw for cutting aluminium profiles with feed pusher, in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Maximum feed length of material pusher: 6,200 mm Bedpfxswx I Hvj Acmolh The unit is dismantled and stored at our warehouse Further technical data available on request

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, številka stroja/vozila: 4867, Pressta Eisele avtomatski stiskalni stroj HE 40 S Blodpfxjy Tizko Acmeh Cena: 2000 evrov

Leto izdelave: 2016, stanje: rabljeno, Maks. dolžina podajanja: 3000 mm Bedpfx Acsza Akwsmolh Voz je mogoče preklopiti navzgor Ročno premikanje Namestitev na desni strani 2 po višini nastavljive noge Plastična kolesa

Stanje: dober (rabljeno), Leto izdelave: 1993, Mitre saw, saw unit right/left, double mitre saw, cross-cut and mitre saw, double end profiler Bledpjtxkprofx Acmoh - Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 - Cutting length: 250 to 5000 mm - Saw units: swivelable by 45° - Saw blade: Ø 500 mm - Cutting data 90°: cutting height 350 mm, cutting width 160 mm - Cutting data 45°: cutting height 260 mm, cutting width 125 mm - Dimensions: 5750/1220/H1700 mm - Weight: 1200 kg

Leto izdelave: 1996, stanje: rabljeno, Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vice clamping width: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed via foot switch activation Bsdsq Awg Ejpfx Acmolh Profile clamping via steplessly swiveling vice.

Leto izdelave: 1993, stanje: rabljeno, Milling cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop adjustable between 20° - 90° - 20° Pneumatic workpiece clamps Bodpfx Ajrv A Hmjcmjlh Minimum quantity lubrication system Manual feed Weight: approx. 280 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Naprodaj je PRESSTA CYKLON D avtomatski vijačnik z dvema glavama, skupaj z vsemi priključki. Paketna ponudba: če ga kupite skupaj z varilno linijo WM740 in obdelovalnim centrom SMC350, ki sta prav tako vključena v naših oglasih, je cena 180.000 EUR. Bsdpfoyziu Tsx Acmslh

Leto izdelave: 2009, stanje: rabljeno, Pogon s 3 rezkalnimi motorji, kar zagotavlja zelo stabilno konstrukcijo (jekleni profili so vpenjani z 3 strani v enem prijemu). Zaskočitev hoda horizontalnih motorjev omogoča, da se profili pri vstavljanju in odstranjevanju ne opraskajo. Obdelava širin profilov do 300 mm mogoča (npr. poštni nabiralniki), samo z navpičnim rezkalnim motorjem. Izvedba: z 1 navpičnim in 2 horizontalnima rezkalnima motorjema, Blsdpfx Ajy Nm Erscmeh pnevmatska pritrditev obdelovanca, 2 horizontalna vpenjalna cilindra, 3 pnevmatske razpršilne šobe, Rezkalno območje navpičnega motorja, dolžina/globina: 365 x 230 mm Rezkalno območje horizontalnih motorjev, dolžina/višina: 250 x 100 mm Največja višina profila: 150 mm Upravljanje preko stikala in 4 ročnih ročic.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.809 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1559, premer žaginega lista: 550 mm, dolžina podajanja os X: 800 mm, skupna dolžina: 2.400 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, Obseg rezanja okroglega jekla pri 90°: 190 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.850 obr/min, največja višina reza: 150 mm, skupna masa: 1.650 kg, dolžina odseka (min.): 3 mm, dolžina odseka (maks.): 4.000 mm, hitrost žaginega lista: 2.850 obr/min, vhodna napetost: 400 V, pogonska enota žage: 7.500 W, premer rezanja: 270 mm, izvrtina žagine plošče: 40 mm, Fully automatic circular saw PROFILMA 502 + Chip extraction unit MG 3 ST Fully Automatic Circular Saw PROFILMA 502 Fully automatic operation, 7.5 kW drive, duty cycle S6, 400 V, 50 Hz, 2850 rpm. Designed for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Siemens S7 control with touch display, including piece counter. Includes CPU 315 and Flexisoft, batch quantity multiplier for bundle processing. Cycle time specification in seconds, chain dimensions. Includes reversing device for section length up to max. 4 m. Automatic shutoff via limit switch at end of material, fault diagnostics. IXON router for VPN connection, see data sheet. Motorised saw blade feed, steplessly adjustable, vertical and horizontal clamping device (from below upwards), on infeed and outfeed sides of the saw head. Cutting width extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, equipped with ball screw and servo motor, including pneumatic horizontal and vertical clamping devices. The profile support area in the feed section is fitted with a lift/lower roller. Minimum remnant piece from 75 mm, depending on profile. Horizontal and vertical clamping pressure reduction with 6 pressure regulators. Timed spray device with fill level monitoring and automatic shutoff. 1-litre lubricant tank. Noise reduction package; machine frame internally lined with sound insulation mats. 2 extraction ports Ø 100 mm. Safety guard over the saw head and feed unit. 740 mm roller conveyor with reach-in protection on the infeed side. 450 mm Pertinax table plate with reach-in protection on the outfeed side. Bodpfxey Dtpmo Acmjlh Chip extraction unit MG 3 Dust and chips are collected in a 172-litre metal container, which can be swung out easily for emptying. 2 outlets with 100 mm hose adapters, without extraction hose. 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, negative pressure 30 mbar, fitted with fan snail housing above the extractor. Large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 dB(A). Selector switch for continuous operation or operation via saw control. No electric cable. Paint finish: RAL 7035 / 9016.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Type: AKF 250L Motor: 400 V, 2.2 kW Blsdpfxjtt Eb Se Acmeh Speed: 2,800 rpm Cutter diameter: 250 mm Cutter spindle diameter: 40 mm Milling width: 300 mm Milling depth: 85 mm Profile height: 160 mm Weight: approx. 150 kg Dimensions (W x H x D): 950 x 1450 x 930 mm

Stanje: dober (rabljeno), Leto izdelave: 1996, ■ Punching machine, complete with base frame Blsdpfxetk Ul Ro Acmeh ■ Hydro-pneumatic drive ■ Operated via foot valve ■ Maximum stroke length: 40 mm ■ 25 double strokes per minute ■ Maximum installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table height: 950 mm ■ Punching force: 90 kN at 10 bar

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), Installation height: Standard 140 mm Bjdpfx Aofitbwjcmjlh Maximum installation height: 280 mm Table size: 450 x 300 mm Dimensions (W x D x H): 60 x 850 x 1500 mm Weight: 300 kg

Leto izdelave: 1992, stanje: zelo dobro (rabljeno), Hydro-pneumatic drive Blodpfxjfcbb He Acmsh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, ■ Punching machine, complete with base frame Bedpfey S Abbex Acmjlh ■ Hydro-pneumatic drive ■ Operated via foot valve ■ Maximum stroke length: 40 mm ■ 25 double strokes per minute ■ Maximum installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table height: 950 mm ■ Punching force: 90 kN at 10 bar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, za obdelavo aluminijastih in jeklenih profilov z 1 navpičnim rezkalnim motorjem, pogon 1,1 kW, 220/240 V, 50/60 Hz Hitrost vrtenja 7.000 – 11.000 min⁻¹ 2 pnevmatska kopirna zatiča, s kopirnim čepom 5/8/10 mm Bljdpfx Acsy S Aa Dsmoh Pnevmatsko vpenjanje obdelovanca z 2 vodoravnima vpenjalnima cilindroma 1 pnevmatska razpršilna šoba Območje rezkanja, dolžina/globina, 365 x 230 mm Največja višina profila 150 mm, širina profila do 300 mm Upravljanje preko stikala in 2 ročnih vzvodov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, * Tehnično brezhibno stanje, pripravljen za uporabo po popolnem servisu * Razdeljene stiskalne glave * Pnevmatski pogon * Največja višina profila: 160 mm * Enota za omejevanje se lahko spusti pod površino mize Bedpfxsy Naz Tj Acmjlh * Hidravlično zaklepanje za ponastavitev enote omejevalnika

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8698, skupna masa: 380 kg, Visokozmogljiva stroj za kotno spajanje za obdelavo aluminijastih profilov z merami utora od 25 do 60 mm in zamikom profilne komore do 40 mm. Nastavljiva prebijalna telesa ter brezstopenjsko nastavljivi višinski tipala, noži in vložki za naslone omogočajo natančno prilagoditev različnim konturam profilov. Bedpfey Sptksx Acmelh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Metal circular saw from 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feed and a pneumatic clamping system to ensure efficient operation. If you are looking for a high-quality saw, you should consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for more details about this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: Adjustable, approx. 3,500-5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed, top-down • Cutting principle: Cross-cut • Material feed: Automatic servo feed with repeat strokes for longer cut lengths • Material separation: Before retracting saw blade (no re-cutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force adjustable separately; exchangeable plastic/PVC pads • Control: PLC-based; operated via control panel with display Bedpoyyxxfjfx Acmjlh • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status display • Saw blade lubrication: Minimal quantity lubrication (spray mist), programmable lubricant control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor power: up to 22 kW (multi-stage motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction (for connection to Ø100/Ø160 mm ports)