Rezkalno-pihalni stroj za ALU profile

Pressta Eisele Säge-Stanzanlage

The machine is powered and can be inspected by appointment!

Technical data / Machine components:
Year of manufacture: 12/2009
Make: PRESSTA-EISELE
Voltage: 400 V
Rated current: 19.2 A
Operating pressure: 250 bar
Dimensions: approx. 18-20 m long, approx. 3 m wide
Weight, unpacked: 4.5 to 5 t

Horizontal loading magazine:
5-strand timing belt conveyor, belt width 32 mm, tooth profile on running side
17 compartments, each 90 mm wide for profile loading, with driver 40 x 10 mm (H x W)
2 sliding supports between timing belts for additional support
Depth, max: 2,380 mm; Length: 7,400 mm
Max. loading weight: 1,000 kg
Conveyor length: 1,850 mm
Minimum profile length: 1,000 mm
Maximum profile length: 7,300 mm
Common drive with geared motor: 0.55 kW, 400 V, 50 Hz
Conveying speed: 4 m/min
Left-hand material stop
"Empty" magazine sensor, manual indexing
First-load touch switch
5 pneumatic cylinders for longitudinal alignment of profiles
6 lift rollers to raise the profile from the loading magazine and transfer to pusher

Pusher, electronically positionable feed system:
Reinforced design
Maximum feed length: 9,000 mm
Mounted on the right side of the machine
Profile feed from right to left
Guide rail with linear guide system
Carriage plate construction with linear ball bearings
Drive via linear motor, positioning via magnetic tape
Pneumatic material gripper
All 8 profiles can be automatically clamped without adjustments
Repeat accuracy: +/- 0.15 mm
Rapid traverse speed, max: 180 m/min
Profile tube length input in control
1 light barrier for detecting profile start before first punching unit

Punch unit:
Hydraulic drive
Punching force per cylinder: 3.0 t, designed for 55 strokes per minute
Max. 2 tools in operation
Vertical punching head with 2 cylinders
Punch stroke 15 mm, incl. 2 punching tools for holes, ø 6.5 mm, 65 mm pitch
Each punching cylinder selectable individually, profile guide
2 horizontal punching heads
Punch stroke 15 mm each, incl. 1 punching tool for holes, ø 6.5 mm, and 1 tool for slots 7 x 12 mm, profile guide
Intermittent spray unit with 4 nozzles for lubricating punches
3 l oil tank, fill level monitoring

Saw:
Drive 5.5 kW, 400 V, 50 Hz
Saw blade ø 500 mm
Saw feed pneumatic, hydraulically controlled, from below
Pneumatic profile clamping device, vertical and horizontal
Intermittent spray unit with one nozzle
Flap after the saw to remove cut-offs and remnants, max. 200 mm length
Parts fall down into the provided container
Gjdpfxozbac Ts Akqoiu
Longer remnants are removed with good parts

Dot marking system:
Marking size 2 – 7 mm
Marking window 80 x 20 mm, 15 characters including spaces
Marking is applied approx. 190 mm after the saw cut
Data transfer from an Excel file via interface
Each profile can receive a different designation

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.