PRESSTA EISELE PROFILMA 502

PRESSTA EISELE PROFILMA 502

Stanje: novo, Krožna žaga Profilma 502, reprezentativna za raznoliko serijo »Profilma« idealna za proizvodnjo oken in fasad, avtomobilsko industrijo, strojno in opremijsko industrijo, fotovoltaiko/solarne sisteme itd. • za aluminijaste in plastične profile • popolnoma avtomatizirano upravljanje • krmilnik Siemens S7 z zaslonom na dotik, vključno s števcem izdelkov • diagnostika napak, vključno z usmerjevalnikom IXON za VPN-povezavo • množitelj količin za uporabo svežnjev materiala • prikaz časa cikla v sekundah • za uporabo žagastih listov premera Ø 550 mm • pogon 7,5 kW, S6, 400 V, 50 Hz, 2.850 vrt/min • motorizirano podajanje žage, rezanje žage od spodaj • razširitev rezalne plošče na obeh straneh žagastega lista • enota za podajanje materiala s krogličnim vijačnim mehanizmom in servomotorjem • dolžina podajanja: 3–800 mm • drsna sani z dvižno in spuščeno podporno valjčno • povratna naprava do dolžine segmenta največ 4,0 m • samodejni izklop prek končnega stikala ob koncu žaganega materiala • ostanki od 75 mm (odvisno od profila) Osnovni stroj je na voljo tudi kot avtomat za žaganje, vrtanje in navojno rezanje ali kot avtomat za žaganje in izsekovanje. S hitrostjo in učinkovitostjo ter natančnostjo in visokim številom izdelkov boste hitro in učinkovito izvedli naročila. Dodpfszlr Rcsx Apwjwc Druge avtomatizirane krožne žage, tudi za večje dimenzije profilov ali drage materiale, so na voljo v preizkušenem standardnem programu Pressta-Eisele. Na podlagi vaših specifikacij obdelave vam z veseljem svetujemo!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Djdpfxouiy Hrs Apwowc Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1589 / 1590, premer žaginega lista: 500 mm, Fully Automatic Sawing and Punching System for Aluminium and Plastic Profiles The Profilma 502 ST - V combines precise sawing and punching in a continuous, automated work process. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex machining operations, and processing of bundled materials. Control is handled via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnosis. An IXON router provides secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing Range & Feed: 500–550 mm saw blades Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Dedpfx Ajyyz Ebepwowc Infinitely variable speed regulation Saw cut from below, motorized feed Material feed: 3–800 mm, reversible up to 4,000 mm Ballscrew with servo drive and round-shaft guide Remnant piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching Unit: Vertical hydraulic punching unit (outfeed side) with automatic oil cooling Punching force: 300 kN Stroke: 20 mm Double-stroke cycle time: 2–3 seconds Punch scrap ejection into frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, reduced pressure) 3 chip extraction ports, Ø 100 mm, volt-free contact for extraction control Minimum quantity lubrication system with 2x 3-liter tank and fill level display Noise reduction package: hood and internal saw blade guard insulated Roller conveyor (740 mm) with operator protection on infeed side Sturdy stationary machine frame, working height: 960 mm Manually operated safety hood Saw blade housing located below table surface Max. Cutting Range: Profile height: up to 65 mm Profile width: up to 170 mm Technical Data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm 2 machines available ----- Attractive Offer – Flexible & Worry-Free We offer not only a high-quality product but also tailor-made financing options that suit your needs. Whether down payment, installment plan, or individual financing models – together we’ll find the right solution. On request, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 67 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1591 / 1592, premer žaginega lista: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automated process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. The horizontal punching unit can be deactivated if needed. Sawing range & feed: 500–550 mm saw blades Djdpfxeyyzxhj Apwjwc Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Continuously variable speed control Up-cut sawing, motorized feed Material feed: 3–800 mm, reversing up to 4,000 mm Ball screw spindle with servo drive and round shaft guide Offcut: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching unit: Vertical and horizontal hydraulic punching (discharge side) with automatic oil cooler Punching force: 2 × 150 kN Stroke: ≤ 20 mm Vertical stroke infinitely adjustable (also suitable for embossing) Horizontal punching cylinder can be switched off separately Double-stroke cycle time: 2x 2–3 seconds Punch waste is discharged laterally from the machine frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, pressure-reduced) 3 chip extraction nozzles Ø 100 mm, potential-free contact for extraction control Minimum quantity spray unit with 2x 3-litre tanks and level indicators Noise protection package: hood and saw blade guard with internal insulation Roller conveyor (740 mm) with reach-in protection on infeed side Sturdy stationary frame, working height: 960 mm Manually opening safety hood Saw blade housing below the tabletop Max. cutting range: Profile height: up to 65 mm Profile width: up to 135 mm Technical data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm A total of 2 units available. ----- Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailored financing options that suit your needs. Whether it’s a down payment, installment plan or individual financing models – together, we’ll find the right solution. On request, we can also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding offer. We provide personal and competent advice. Subject to prior sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, STAR SR20J II, TIP A Dsdpfxszqduks Apwowc Letnik izdelave 2023 CNC-krmilnik Fanuc, model 32i B Največja kapaciteta za obdelavo palic: 20 mm Opremljen z osjo Y in osjo C Pogon za orodja Napajalnik palic ALPPS TOOL CO ASR X-20ASII Transportni sistem za odrezke LNS Izjemno nizko število delovnih ur Od trenutka proizvodnje se je uporabljal izključno za obdelavo medenine Izbira orodij in potrošnega materiala je vključena v dobavo Stroj je na voljo od konca septembra 2026.

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 1423530534, Ponudba 26120 Tehnični podatki: - Premer žaginega lista pribl. 500 mm - Hitrost vrtenja žaginega lista 2800 min⁻¹ - Območje reza npr. do pribl. 180 x 150 mm ali 150 x 200 mm - Dolžina pomika pri 90° rezanju: 5 – 600 mm - Poševni rezi do 45° mogoči Dsdpfx Apoy Efl Nswjwc - Priključek na stisnjen zrak: 7 bar - Poraba zraka na delovni cikel brez / s pršenjem: 50 / 64 l - Pogon: 400 V / 4,0 kW - Potrebni prostor pribl. Š 2750 x V 1600 x G 1350 mm - Teža pribl. 800 kg - z: digitalnim prikazovalnikom, pnevmatskim vpenjalom, samodejnim izklopom na koncu profila

Stanje: pripravljen za uporabo (rabljen), Fully hydraulic circular saw automatic machine for workshop and production. Material clamping is performed via hydraulic clamping vices. The control system provides easy machine operation. Cutting length can be precisely set using a vernier scale with 0.1 mm resolution. The piece count can be set through a piece counter, which will automatically switch off the machine when the desired quantity is reached. Material feed is achieved through a hydraulic cylinder, ensuring maximum cut accuracy. Should you have any questions or require a different cutting range, please feel free to call us. We would be pleased to demonstrate and present the machines to you. Technical Data: Bandsaws KASTO Machine type GKS AU Technical Specifications Drive power, saw gearbox: 1.6 / 2.5 kW Cutting speed: 14 / 28 m/min Cutting range, round: 140 mm Cutting range, flat: 160 x 90 mm Saw feed (hydraulics): Hydraulic Saw blade diameter: 425 mm Hydraulic material feed: 600 mm Material support table: 1050 mm Machine dimensions (L x W): 2575 x 2700 mm Height: 1900 mm Machine weight: 1350 kg Year of manufacture: 1987 Dwodpfeiuz Smox Apwoc

Stanje: novo, Leto izdelave: 2023, SPECIAL PRICE, Stock Machine Year 2023! List price for standard machine + "LUBETOOL" minimal lubrication system option: €28,810 STOCK MACHINE – Fully Automatic Aluminum Circular Saw, 90° Cut with drilling unit TR 12 (up to ø 10 mm) or TR 20 (up to ø 20 mm), offering simple, safe operation and outstanding cutting performance. This machine is designed exclusively for 90° cuts! In a single operation, workpieces can be drilled and cut to length. Technical Data: ● Cutting capacity: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3,000 rpm ● Feed: Simple stroke 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade size: 350 x 32 mm Standard Equipment: ● 90° cut machine with powerful drive motor Dwsdpfx Asmftiwepwoc ● Clearly arranged, large control panel ● Adjustable cut length from 5 to 300 mm via handwheel and counter ● Main clamp with 3 pneumatic cylinders, 1 horizontal, 2 vertical ● Feed clamp with horizontal and vertical pneumatic cylinder ● Large safety guard covering the entire working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for extraction system ● TR 12 or TR 20, fixed automatic drilling unit with single tool holder, spindle speed, drilling depth adjustments, etc. done manually; drilling cycle is automatic ● Optionally fitted to stock machine: "LUBETOOL" minimal lubrication system with two pumps --> Also available as CNC version or in various sizes!

Stanje: pripravljen za uporabo (rabljen), Stroj je odpojen od napájení. Dwodpshva I Ijfx Apwjc

Stanje: zelo dobro (rabljeno), We are offering a second-choice lattice beam from the manufacturer SSI Schäfer for purchase. Technical data for the lattice beam: Dedpeh Eg Akjfx Apwewc Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x Lattice beam, second-choice Material finish: Sendzimir galvanized Overall length: approx. 1,249.2 mm Hole center-to-center: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm General information about the item: This item is only available for collection. Any additional transportation or shipping of this item will incur extra costs, which can be quoted separately depending on the delivery location and scope.