Pony Luxury Coating M&K S10 Und F10 nakup rabljenega (90.754)

Stanje: novo, Oprema: kabina, Stationary small parts spray booth Dixi █████ Coating small parts perfectly & evenly. The extraction system ensures perfect results in the smallest spaces. Optionally equipped with a turntable or wheel mount, as well as a compact yet powerful extraction unit, it is ideally suited for processing small workpieces and rims. The side walls effectively limit overspray distribution, allowing work to be carried out in confined spaces without contaminating adjacent areas. Additionally, integrated lighting can be installed. Thanks to its low weight and minimal connection requirements, it can be relocated to a new site in a very short time, maintaining your operational flexibility at all times. The system is delivered fully pre-assembled and Your benefits Rsdpfjxa Hx Rox Agtjt Thanks to its compact design, flexible dimensions and adaptable accessories, a wide range of applications is possible without any issues. The sophisticated modular system requires little space, making it suitable for use in all types of rooms. The various filter media and filter stages ensure highly efficient operation and make filter changes a matter of just a few minutes. Application and safety Processing both water-based and solvent-based coatings is guaranteed thanks to the use of ATEX-approved explosion-proof motors. Optionally also suitable for glue spraying. The large filter surface ensures uniform extraction.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.500 mm, skupna dolžina: 7.050 mm, skupna širina: 4.100 mm, volumenski pretok: 36.000 m³/h, temperatura: 80 °C, vhodna napetost: 380 V, ogrevalna zmogljivost: 250 kW (339,91 KM), Oprema: kabina, osvetlitev, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively, also available as a separate paint booth with a dedicated dryer). Here, we rely on full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating panels or wall extraction at a position of your choice. If you want to further increase the efficiency of the system beyond heat recovery and stepless control via frequency converter, we are pleased to offer you a sectional control system. This allows you, during repair painting or partial loading of the booth (for example, if you only wish to paint add-on parts), to activate exclusively the section in which the components are located. This way, you can operate with a lower air volume without sacrificing quality, thus saving energy and ultimately real money. Please contact us—we will be happy to demonstrate these options to you. Do you have any questions or suggestions? We are gladly at your service. Rjdpfx Ajxa H Ewsgtet

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, trajanje garancije: 24 meseci, temperatura: 80 °C, potreba po zraku: 36.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 345 kW (469,07 KM), moč: 40 kW (54,38 KM), gorivo: utekočinjeni naftni plin (LPG), poraba energije: 40 kWh, izolacijski material: Mineralwolle, debelina izolacije: 50 mm, nazivna moč: 345 kW (469,07 KM), Oprema: osvetlitev, MAIN SPECIFICATION Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. All processes inside the booth are managed via a PLC system, ensuring consistent adherence to set values. Redswzmcbspfx Agtjt OPERATING PRINCIPLES OF THE BOOTH Processes inside the booth are controlled via an operator panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn from outside, passed through front filters, and directed into the plenum chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters before being released. FLASH-OFF PROCESS After painting, the booth continues to run for approximately 15 minutes to extract residual solvents and thinners. During this phase, fresh air from outside continues to circulate within the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and supplied into the booth through a distribution system. As approximately 20% of the solvent is released during drying, it is expelled together with this air. Industrial coatings are typically cured at 60°C, but booth temperature can be adjusted via the operator panel as needed. COOLING PROCESS After the 30-minute drying phase, the heating coil is deactivated from the operator panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of all machinery and equipment inside the booth. The panel is made of durable galvanized sheet metal and steel sections and is fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel contains essential components such as circuit breakers, fuses, signal lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for the command and control connections between the control panel and motors or other electrical equipment. • Electrical wiring is designed to allow for relocation of the booth if required. • Operating equipment uses 380 V 50 Hz, while control devices use 220 V. • The booth operating time can be monitored on the electronic panel for easy maintenance tracking. • Temperature and timer settings for flash-off, intermediate drying, and final drying can be easily programmed to the required values on the electronic control panel’s digital display. • Users can monitor and adjust drying times via the heating thermostat and timer relay.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperatura: 230 °C, ogrevalna zmogljivost: 30 kW (40,79 KM), notranja dolžina: 2.500 mm, notranja širina: 1.505 mm, ✈️ Plus shipping costs – shipping available on request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Efficiency Class A+++✅✅✅ ✅ Plug & Play system – delivered fully assembled, ready for immediate use! ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chances of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder coating oven with electric heating – ✔️ Internal dimensions: 2500mm (L) x 1505mm (W) x 1800mm (H) ✔️ Electric heating power: 30 kW/h ✔️ Blower: 3000 m³/h 80mm SS ✔️ Circulation fan output: 1.5 [kW/h] ✔️ Total 35 kW/h ±10% ✔️ Digital temperature control, steplessly adjustable up to 220°C ✔️ Sandwich panels: Inside 1.5mm galvanized steel, outside 1.5mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function adjustable ✔️ Acoustic signal at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150mm (150mm stone wool) 🔥 PEF-2.5 Curing Oven – your versatile industrial oven for drying and curing processes! 🔥 Whether for powder coating, wet painting, plastics processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying operations up to 230°C! 🌡️ _____ 🚚 Maximum flexibility in loading • Compatible with overhead rail systems • Optional insert shelving system for small series _____ ⚙️ Intelligent control – tailored to your needs ✅ PID control (optional) for precise temperature management ✅ Touchscreen control panel & smartphone operation 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) Rjdpfxewfgbre Agtst ✅ Timer function: freely programmable from 10 minutes up to 24 hours ⏲️ ✅ Automatic shut-off after process completion _____ ♨️ Ramp heating mode (optional) Control temperature ramp and hold times precisely, e.g.: • Reach target temperature in a defined time • Hold at desired temperature • Controlled cooldown to target temperature • Automatic notifications for process events _____ 🛡️ Safety first 🟢 Safety sensor for overheat prevention 🟢 Automatic shutdown in case of malfunction 🟢 Audible alarms in case of errors 🟢 Solvent and fume extraction via automatic ventilation _____ ⚡ Customized energy & heating systems 🔥 Also available with extension up to 400°C for high-temperature processes (optional) _____ 🧠 No need for repeated settings! The oven stores your process parameters – batch by batch. This saves you time and prevents errors. _____ 📢 And best of all: If you have specific requirements – we also build custom ovens to your specifications! Contact our expert team for personal consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN SO EASY! Redpfx Aswfhu Hogtet Are you looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This powerful system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – all with minimal effort! ✨UNBEATABLE SPECIAL OFFER – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it’s too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled and ready to use! ✅ 100% European manufacturing – No Chinese goods, but the highest quality according to European standards! ✅ Modular & expandable – Additional options for more performance and flexibility! ✅ All spare parts included – Long-term use with no hidden additional costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chances of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505 mm ✔️ HEIGHT: 1,800 mm (from air duct) ✔️ INTERNAL LENGTH: 2,500 mm ✔️ Dimensions of the thermoblock unit are 785x1800x2210 mm. The heating power is 30 kW/h. A recirculation fan is 1.5 kW/h – 1 unit; an exhaust fan is 0.54 kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are made to the specified floor panel dimensions. ✔️ Specially designed air duct ensures homogeneous air distribution within the curing oven. ✔️ Electrical switchgear components are Siemens and Schneider. This curing oven does not have a PLC system. PLC is optionally available. ✔️ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and visual signal sounds from the buzzer. ✔️ Additionally, a product transport trolley with cast wheels is included inside the oven. ⭐ Powder booth ✔️DIMENSIONS: 800x1930x2200 mm (dimensions including fan) ✔️ Teflon filter: 4 pcs ➢ Filter suction fan: 4 kW x 1 unit (6,000 m³/h – 200 mmSS) ✔️ 36 W LED lighting x 1 unit ✔️ Lowest drawer x 1 unit ✔️ Control panel for air intake and pressure blasting ✔️ DELTA frequency inverter ✔️ Heavy-duty rollers under the spray booth ✔️ An additional filter is located at the fan outlet. ⭐ Powder coating gun E-Coat+3 Master with multicolor (vibration table) Contact us now – Prepare your company for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️ We have CE certificates for all our machines and ATEX certificates for the necessary machines. ☀️

Stanje: novo, Leto izdelave: 2025, skupna višina: 982 mm, skupna dolžina: 4.000 mm, skupna širina: 1.100 mm, volumenski pretok: 18.000 m³/h, trajanje garancije: 12 meseci, Suction wall with 18,000 m³/h MAX power consumption 5 kW/h Electric motor 4 kW Rjdewz Ic Njpfx Agtst Air unit 18,000 m³/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Stanje: novo, Powder Coating Systems For years, powder coating has been evolving continuously as an alternative to wet painting, and especially recently, it has gained significant importance due to its lower environmental impact, as it does not generate solvent or paint sludge emissions. In particular, the ability to recover unused powder enables especially high efficiency levels. For users, powder coating has the advantage of providing an extremely durable and corrosion-resistant finish that is considerably more impact-resistant than conventional paint. Additionally, reworking, such as grinding or drilling coated parts, poses no problem and will not cause the coating to flake off. Pony Luxury Coating powder coating systems therefore deliver tangible benefits: they are efficient, environmentally friendly, and—true to our tradition—exceptionally flexible. We achieve this through a range of different plant types. Rsdpfsxa Hzxox Agtjt Manual Powder Coating Systems Manual powder coating installations are the ideal solution for complex and challenging workpieces. With skilled personnel, there is continuous adaptation to changing circumstances and product sizes. Flexibility is paramount, and these systems also offer a cost-effective entry into the world of powder coating. Large-Capacity Powder Spray Booths No matter how large or demanding your workpieces are—our systems are even larger! Due to the high loads involved in commercial and utility vehicle applications, powder coating has established itself as the ideal solution here. To accommodate ever-larger components, we offer large-capacity powder coating booths that, combined with manual application, place no limits on workpiece size and, when used in conjunction with conveyor systems, can handle any dimension. Automatic Powder Coating Systems If your operation requires high throughput and speed, an automated powder coating installation is your ideal solution. Coupled with conveyor systems, light curtains enable precise part detection and, therefore, exact dosing of powder for optimal efficiency. Of course, we also offer systems equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers The perfect finishing touch for any powder coating process: the curing oven. Our ovens, built to the highest insulation standard, extend our system-wide efficiency to this crucial stage. Detailed temperature control also allows use as a flash-off dryer to dry components after pretreatment. Temperatures of up to 250°C are possible, making these ovens suitable for use as tempering ovens—for example, with hot-dip galvanized parts. Of course, classic use as a powder curing oven is straightforward; optimal air distribution and a visualized control panel prevent overbaking and even enable simultaneous curing of different color shades. Questions or suggestions? We are always happy to help!

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.400 mm, skupna višina: 2.210 mm, skupna širina: 1.505 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, temperatura: 250 °C, ogrevalna zmogljivost: 30 kW (40,79 KM), notranja dolžina: 2.500 mm, Oprema: nujno zaustavitev, ✈️ Additional shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy efficiency class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready for immediate use! ✳️ Preserve your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. ☘️ Environmentally friendly☘️⚡️Green Energy⚡️☘️ PEF-2.5 POWDER CURING OVEN ELECTRIC INTERNAL WIDTH: 1,505 mm HEIGHT: 1,800 mm (measured from air duct) INTERNAL LENGTH: 2,500 mm ➢ Dimensions of the thermoblock unit: 785x1800x2210 mm, heating power 30 kW/h, one recirculation fan: 1.5 kW/h, one exhaust fan: 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails for trolleys are manufactured as per the measurements stated on the base panels. ➢ Specially designed air duct for homogeneous air distribution inside the curing oven. ➢ Electrical control panel components from Siemens and Schneider. This curing oven does not come with a PLC system; PLC is available as an optional extra. ➢ Curing temperature, curing time, and heating unit functions are adjustable. At the end of the cycle, an audible and visual signal is emitted by the buzzer. ➢ Additionally, there is a product transport trolley with castor wheels inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200 mm (including fan) ➢ Teflon filters: 4 pcs. ➢ Filter extraction fans: 4 kW x 1 unit (6,000 m³/h – 200 mm SS) ➢ 36 W LED lighting x 1 unit ➢ Bottom drawer x 1 unit ➢ Control panel for regulation of air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty castors beneath the spray booth ➢ Additional filter at the fan outlet Redpfxowdtfuj Agtot ♨️ Ramp-Heating Mode (optional) Precisely control temperature profile and dwell times, e.g.: • Reach target temperature within defined time • Maintain set temperature for desired time • Controlled cooling down to target temperature • Automatic notifications on process events _____ 🛡️ Safety First 🟢 Safety sensors for overheating prevention 🟢 Automatic shutdown in case of malfunction 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and smoke extraction via automatic ventilation _____ ⚡ Tailored Energy & Heating System 🔥 Also available with upgrade up to 400 °C for high-temperature processes (optional) _____ 🧠 No repeated settings needed! The oven saves your process parameters – batch by batch. Save time and avoid errors. _____ 📢 And best of all: If you have specific requirements – we also build bespoke special ovens according to your specifications! Contact our expert team for personal advice! _____ ☀️ 2 YEARS WARRANTY ☀️ Request more information now

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.600 mm, skupna dolžina: 11.200 mm, skupna širina: 5.100 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, notranja višina: 4.970 mm, notranja dolžina: 11.000 mm, temperatura: 80 °C, notranja širina: 5.000 mm, potreba po zraku: 52.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 250 kW (339,91 KM), moč: 45 kW (61,18 KM), gorivo: utekočinjeni naftni plin (LPG), vhodna frekvenca: 50 Hz, poraba energije: 45 kWh, debelina izolacije: 50 mm, nazivna moč: 250 kW (339,91 KM), najv. debelina jeklene pločevine: 2 mm, Oprema: osvetlitev, * Air Treatment Unit: The air treatment unit is a circulation system that supplies the cabin with filtered fresh air and extracts used air during the painting process. It heats the air to 60°C, mixes the exhausted air with 10% fresh air via an automatic multi-damper system, and reheats the air before recirculating it into the cabin. The air is heated by a burner and a heat exchanger, both made of high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air is filtered twice (by pre-filters and ceiling filters) before entering the cabin. The polluted air is also filtered twice (inlet and exhaust filters) before leaving the exhaust unit. Air treatment units are insulated like the sidewalls to minimize heat loss and are protected against possible vibration and noise by rubber seals on the covers. The exhaust air is regulated by a damper in the exhaust duct, contributing to the control of the cabin’s internal pressure. *OPERATING PRINCIPLES OF THE CABIN:* Rsdpfswzl Hxjx Agtjt The processes in the cabin are controlled via a control panel, which manages the following steps: *PAINTING PROCESS:* During painting, 100% fresh air is drawn in from outside and passed through the front filters before reaching the plenum at ambient temperature. The air is then discharged via the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before being released. *FLASH-OFF PROCESS:* After painting, the cabin runs for another 15 minutes to expel residual solvents and thinners. Fresh air from outside circulates in the cabin during this phase. *DRYING PROCESS* In this phase, 80% of the air flowing through the cabin is heated to 60°C and delivered into the cabin via a plenum. Since 20% of the solvent is released during drying, the solvent is expelled with this air. Industrial paints are typically dried at 60°C; however, the cabin temperature can be adjusted via the control panel as needed. *COOLING PROCESS:* After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates into the cabin, and afterwards, the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of the machines and devices integrated into the cabin. The control panel is made of durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Switch Panels: • The control panel contains essential components such as contact breakers, fuses, indicator lights, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • The electrical wiring is designed to allow cabin relocation, if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Rodpfx Ageh Eyd Retst Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 Rjdpfxei Dtb Uj Agtet 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled, and function-tested pelletizing line Throughput up to 500 kg/h, depending on material, consisting of: - Kreyenborg SW 100 stuffing unit, 7.5 kW drive - BKG single-screw extruder, Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled - Screw speed up to 143 rpm - Screw channel depth 14 mm - Installed heating capacity approx. 35 kW - 1x atmospheric degassing zone (vacuum pump available at additional cost) - Kreyenborg double-piston screen changer K-SWE 160 RS with backflush and screen area of 244 cm² - BKG underwater pelletizing system AH 300, complete with: * Start-up valve including hydraulic station * Pelletizer with 4 kW drive * Water pump 2.2 kW * By-pass system, water tank with 9 kW heater installed and heat exchanger - BKG granulate centrifuge TWE 300 with 3 kW drive - Granulate classification screen - Control cabinet with updated Siemens touch panel Redpsd Sg I Ijfx Agtst OPTIONAL at additional cost: > Vacuum pump > Material conveyor, Big-Bag station > Process water cooling/temperature control unit Additional pelletizing plants available ex works Wuppertal. Ask for our current machinery stock list or visit us.

Leto izdelave: 2026, stanje: novo, A block-mounted sweeper broom KehrFix is being offered in various versions, ranging from 1.50 m to 4.00 m in width. A suitable mounting system needs to be discussed separately if required (e.g. pallet fork mount, bucket hook, or Euro mount). Rodpfjh T A Tnjx Agtjt This block-mounted sweeper is designed for use with forklifts, wheel loaders, tractors, mini loaders, mini dumpers, and many other vehicles and machines! Equipped with a variety of mounting options for quick attachment to numerous vehicles, the KehrFix is the ideal solution for maintaining cleanliness over large areas. KehrFix push brooms are a professional choice for effortless and effective sweeping and cleaning. The robust KehrFix has been engineered to complete these tasks quickly and thoroughly across all conceivable application areas. KehrFix push brooms are high-quality, durable, maintenance-free, and universally applicable sweeping systems.

Stanje: rabljeno, prevoženi kilometri: 177.395 km, moč: 315 kW (428,28 KM), prva registracija: 10/1999, skupna masa: 35.000 kg, vrsta goriva: dizel, barva: rumena, konfiguracija osi: 8x4, največja dovoljena obremenitev: 14.855 kg, lastna masa: 20.145 kg, medosna razdalja: 4.500 mm, zavore: stalna plinska ročica, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: euro2, vzmetenje: jeklo, število sedežev: 2, Oprema: ABS, dodatne luči, greljenje sedeža, kabina, klimatska naprava, nizka raven hrupa, parkirni grelec, servovolan, sistem za imobilizacijo, tempomat, zapora diferenciala, Vehicle location: Bovenden, with materials at house, 1x comfort seat, heated seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, 16-speed manual gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, raised exhaust, differential lock, fog lights, high beam headlights, work lights, rotating beacon, storage box, leaf spring suspension, low noise G1, winter service equipment, 2nd axle steered, underride protection, rear discharge, roof hatch, red environmental badge. Wheelbase: 4500 mm Body: Suction and jetting truck Müller Type Canalmaster F170K approx. 17m³ (10,000 l sludge chamber / 2x 3,500 l water tank) 7.5 t front axle, rear axle H7 13 t, crown wheel 300, EPS 16-speed manual transmission, drum brakes on front and rear axle, programmable special module (PSM), additional thermal insulation, warm air auxiliary heater, flame system, automatic daytime running lights, gearbox oil cooling, comfort package, PTO layshaft MB 2c, gearbox-independent PTO (NMV) i=1.09. - Müller Canalmaster F 170 K - High-pressure pump Uraca KD 716 G/60 170bar/325l/min - Vacuum pump SL2100 - Oil pump Bosch HY/ZFFS 15/19+8 - Heater Eberspächer V7S - Sludge chamber approx. 10,000 l - 2x lateral water tanks approx. 3,500 l each - Swiveling suction hose holder DN 100 Rjdpfsvhi Ubex Agtot The body and hose reel are insulated for winter operation! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to modifications, prior sale, and errors!

Stanje: pripravljen za uporabo (rabljen), Leukhardt LS-IC / ISA-K ID 6307080 Industrial computer with monitor and keyboard, 482 x 310 x 410 mm, serial number as per photo, used, minor signs of wear, 100% fully functional, scope of delivery as shown in photos. Rodpfx Aji Ebycjgtot

Stanje: pripravljen za uporabo (rabljen), Leukhardt LS-IC / ISA-K ID 6307080 industrial computer with monitor and keyboard, 482 x 310 x 410 mm, serial number as shown in photo, used, minor signs of wear, fully functional, scope of delivery as per photos. Redpfx Aji Ebx Uegtot

Stanje: rabljeno, Leto izdelave: 2005, dolžina zabojnika: 24 čevelj, skupna masa: 16.000 kg, lastna masa: 3.250 kg, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.720 mm, številka stroja/vozila: 610272 8, JUMBO BDF swap body / swap box with roller shutter * Corrugated steel box * Crane- and stackable * Length: 7.45 m * Roller shutter Rodpfx Agei Avllstst * Interior with keyhole plate * Anti-slip phenolic plywood flooring * Neutral white, WITHOUT lettering! * Front guide tunnel slightly deformed * Light rust on frame and superstructure * Parking height: 1.02 - 1.32 m * Loading height at roller shutter: 2,620 mm * Overall height: 3,000 mm * New UVV safety inspection on request * Manufacturer: KRONE Nationwide delivery available! We always have larger quantities of various manufacturers and specifications for SALE or RENT in stock!!! All prices are net plus statutory VAT!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, barva: rdeča, skupna masa: 16.000 kg, največja dovoljena obremenitev: 13.000 kg, lastna masa: 3.000 kg, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.460 mm, številka stroja/vozila: 04851, BDF Steel Swap Body / Swap Container 7.45 m with roller shutter door * Swap body / steel box body with profiled exterior wall * Suitable for crane lifting and stacking * Aluminum roller shutter door – fully serviced Redpfxewtqt Io Agtet * Keyhole rails * Anti-slip phenolic plywood flooring, suitable for forklift traffic * Forklift pockets and upper corner fittings * Support legs non-adjustable * Parking height: 1.32 m * Loading height at roller door: 2.20 m * Technically in very good condition Rental from 1 day, long-term lease possible! We always have a large selection of various models and manufacturers available for sale or RENTAL!!! Nationwide delivery available!

Stanje: zelo dobro (rabljeno), Na prodaj industrijska črpalka priznane znamke Grundfos. Model SPK 4-8 – vertikalna večstopenjska črpalka, namenjena za čiste tekočine, hladilne tekočine, industrijske instalacije ter CNC stroje. Tehnični podatki: Proizvajalec: Grundfos Model: SPK 4-8 A-A-A Rodpfoywpahox Agtjt Moč: 0,55 kW Vrtljaji: 2850 obr/min Pretok: cca 3 m³/h Dvižna višina: do 28 m Temperatura tekočine: max. 90°C Država proizvodnje: Danska Stanje: Rabljeno, delujoče. Vidni znaki uporabe (praskice, manjše sledi korozije – glej slike). Vidna razpoka na ohišju pri priključku – ne vpliva na delovanje (priporočamo preverbo s strani kupca).

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ponujamo nov stroj LOWA GmbH Abfüll- und Verschließsysteme WK12-17 za polnjenje in zapiranje steklenic, letnik 2025. Proizvajalec: LOWA GmbH Abfüll- und Verschließsysteme Model: Zapiralni stroj WK12-17 Tip stroja: Stroj za polnjenje in zapiranje steklenic Letnik izdelave: 2025 Redpfsyybh Aex Agtst Stanje: novo ID kategorije: 679 Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Leto izdelave: 2012, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 479 6475, Welding Machine Data: Model: MSE-III-F-EP-SB-200-250 Machine No.: 7739 Year of manufacture: 2002 The welding machine is equipped with: - All welding times are adjustable according to profile. - Welding accuracy: 0.2 mm on exterior dimension. - Clamping plates are heated, with replaceable limit gauges on welding mirrors. - Automatically adjustable limit stops (white 1.2 mm, colored 0.5 mm). - Inserts with adjustable seal cutters. - Seal formers for forming and cutting the inner corners. - Minimum weld size, with thicker inserts: 330 x 500 mm. - Maximum weld size: 3800 x 3300 mm. - Welding heads retract for profile placement. - Set to 5 mm weld-off (2.5 mm per side). The cleaner is equipped with: - Four-axis cleaning unit for fast processing. - Automatic turning station with a gripper arm for gentle handling of large, heavy elements. - Automatic turning up to 3,000 x 3,000 mm. - Manual operation without cleaning unit for small elements or U-frames. Upper tool carrier: - Gasket groove milling cutter - Pull-off knife V-groove - Pull-off knife 3 mm groove - Standard projection inner-corner knife - Round projection inner-corner knife - Inner-corner knife with groove - Horizontal gasket counter-milling for central gasket Lower tool carrier: - Pull-off knife V-groove - Pull-off knife 3 mm groove - Gasket groove milling cutter - Standard projection inner-corner knife - Round projection inner-corner knife - Pull-off knife for offset half-surfaces - Outer contour disc for outer corners Redpfx Agoy Eyqtotst The machine is set up for BluEvolution 82 systems by Salamander and Elegante by Deceuninck. The machine is sold for collection and self-dismantling only. Sale to commercial customers only.

Stanje: dober (rabljeno), Tehnični podatki o prečki paletnega regala: Regalni sistem: SSI Schäfer Tip: PR 600 V obsegu dobave je: 01x prečka paletnega regala, rabljena Rsdpfoynlraex Agtot Barva materiala: rumena Profil: 60 x 40 mm Tip prečke: TRV1-270-064-30 CE Svetla širina: 2.700 mm Kavlji: 5 HK (kavelj) 02x varnostni zatič, rabljen Izvedba: popolnoma pocinkan Za varovanje vzdolžnih nosilcev proti nenamernemu dvigu Vaši kontakti v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o izdelku: Ta artikel je na voljo samo za osebni prevzem. Za dodatno želen prevoz oz. pošiljanje tega artikla so potrebni dodatni stroški, ki jih lahko povprašate pri nas glede na dostavno mesto oz. obseg dostave.

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: Serien Nr. 64019447, Used Coperion Werner & Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. Rodpfxjvcyk Ne Agtet The extruder was used in the production of powder coatings.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja višina reza: 200 mm, premer žaginega lista: 520 mm, vrtljajska hitrost (min.): 2.800 obr/min, dolžina rezanja (maks.): 420 mm, višina obdelovanca (maks.): 200 mm, dolžina podajanja os X: 420 mm, dolžinski omejevalnik: 8.800 mm, pritisk: 5 letvica, zahteva za prostor dolžina: 8.800 mm, potrebna širina: 1.200 mm, Oprema: dvostranski, Mobile saw frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 to 5960 mm, with digital LED length display, measuring length including extension approx. 8800 mm. Saw frame with 6 crank supports ensures stable standing during work. Equipped with electric power distribution and triple 230 V socket outlet. Mobile saw frame Beck ESF 1, ZS 200 saw mounted on the frame. Rsdjv Hhg Tjpfx Agtjt

Stanje: rabljeno, prva registracija: 06/2017, Oprema: ABS, | D-Tec VCC šasija za kontejnerje | Sredinsko in zadnje izvlečenje | 1. os dvignljiva | VALX osi z disk zavorami | Pnevmatske gume: 385/55 R22,5 | Pridržujemo si pravico do napak, vnosnih napak in predprodaje. Sebastian Rica Rodpfxsy H Il Ie Agtjt