Linija za granulacijo

BKG Nordson Kreyenborg Extruder ES 100 mit K-SWE 160 RS und UWG

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 Dcedpfxei Dtb Us Abgsi 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Drying system / dryer suitable for various materials such as powders, granulates, etc. - Control system for temperature regulation Dodpfxequ R Nas Abgeci This machine is connected and ready for testing in our machinery hall.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled, and function-tested pelletizing line Throughput up to 500 kg/h, depending on material, consisting of: - Kreyenborg SW 100 stuffing unit, 7.5 kW drive - BKG single-screw extruder, Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled - Screw speed up to 143 rpm - Screw channel depth 14 mm - Installed heating capacity approx. 35 kW - 1x atmospheric degassing zone (vacuum pump available at additional cost) Dcedod Sg I Ispfx Abgoi - Kreyenborg double-piston screen changer K-SWE 160 RS with backflush and screen area of 244 cm² - BKG underwater pelletizing system AH 300, complete with: * Start-up valve including hydraulic station * Pelletizer with 4 kW drive * Water pump 2.2 kW * By-pass system, water tank with 9 kW heater installed and heat exchanger - BKG granulate centrifuge TWE 300 with 3 kW drive - Granulate classification screen - Control cabinet with updated Siemens touch panel OPTIONAL at additional cost: > Vacuum pump > Material conveyor, Big-Bag station > Process water cooling/temperature control unit Additional pelletizing plants available ex works Wuppertal. Ask for our current machinery stock list or visit us.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), GENSTAND: A-QB1200, PULVERBLANDER FOODTECH Dissolver-blanderenhed PU133 Mærke: QB Food Tech. Type: QB 1200 Kapacitet: 1.200 liter Dsdepcg Haspfx Abgeci Dobbeltkappet til køling/varme. Omrører. Vejeceller.

Stanje: rabljeno, Stožerska razdalja min./maks. 0-108 mm Nagibni kot min./maks. 5°/84° Krmilnik GE Fanuc Series 0-GC Delilni premer (razmerje 1:1): 152 mm Delilni premer (razmerje 10:1): 216 mm Premerna razdalja (najfina/groba): 1,3/8,5 Mod. Maks. čelna širina zobnika: 35 mm Območje hitrosti vretena rezila: 41-121 min⁻¹ Območje hitrosti delovnega vretena: 0-33,33 min⁻¹ Teža: 9025 kg Potrebni prostor cca 2707 x 2720 x 2200 mm Djdpfjyh Rmmsx Abgeci Oprema/dodatki: - 18 kompletov rezil - Transporter ostružkov - Tehnična dokumentacija

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Dsdpfxjt Hwucj Abgjci Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, Prodajamo ta stružnica. Priključena, možnost preizkusa. Stroj ima priloženo dodatno opremo. Stružni premer: 2.000 mm. Stružna dolžina: 10.000 mm. Največja masa obdelovanca: 60.000 kg. Premer obdelave: 2.000 mm. Video stroja je možno poslati preko aplikacije WhatsApp. Dodpexwmbmsfx Abgjci

Stanje: rabljeno, Leto izdelave: 2006, Full Bore Diameter / mm Drilling Depth / mm Number of Spindles / 2-Machine Package: Froriep Deep Hole Drilling Machine & Irle Finishing Machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated units for the complete machining of long, heavy workpieces that demand maximum precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-Machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. Drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Max. swing over bed: 1,000 mm Dcodpjuddimefx Abgei Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC Control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outside diameter: 850 mm With up to 50,000 Nm torque perfectly suited for smooth boring, honing, and demanding finishing processes. Your advantages at a glance: - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tonnes - High process reliability thanks to perfectly synchronized machines - Immediately available, well-maintained, and in operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large-part manufacturing

Stanje: pripravljen za uporabo (rabljen), Number of knives: 6, rotor diameter: 350 mm, motor power: 50 kW, with design as reinforced steel/welded construction and documentation. Inspection is possible. Year of manufacture unknown, comprehensively overhauled in 2022. Dcedpfx Ajn Tpmuebgoi

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany Dcsdpfohy Tp Dox Abgsi