Mep - Halbautomat Shark 332-1 Sxi Evo nakup rabljenega (81.870)

Stanje: novo, Model designation Shark 332-1 SXI evo Dodpfx Apegvkafowswc

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 x 250 mm Cutting capacity at 60° flat: 170 x 170 mm Cutting capacity at 60° square: 170 x 170 mm Cutting capacity at 60° round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel mounted on an articulated arm. Dedpfxjfg E H Uo Apwewc - Low voltage operating unit: - Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Cutting time per cycle * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position. - Manual 24V IP55 cycle selector switch. - Complete cycle program for all special cutting operations. - Identification of additional special cutting cycles for specific applications. - Latest generation, high-performance hydraulic control unit with low energy consumption. - Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Two band speeds (40/80 m/min.) with control system. - Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Bow stroke programmable directly from the control panel for adaptation to the material being cut. - Sliding clamping device, adjustable left and right, with quick-release vice. - Manual blade tensioning control with display via electronic converter. - Base frame designed for complete coolant recovery, even during maximum angle cuts. - Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame. - Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil). - Swarf removing brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cuts of the same length. - Material support arm with roller for securing the loading table. - Bimetal saw blade suitable for solid and profile materials. - Tool kit and operating manual in the respective user language.

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Dwjdpfx Apsxaagbowsc Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: square 250 x 250 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 170 x 170 mm Cutting capacity at 60 degrees: round 180 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Mounted front right, swivelling - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of bow descent - Carbide blade guides - Hydraulic blade tensioning including digital value display - 2x saw blade speeds - 1x Bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Premer reza: 300 mm Obseg reza pri 90 stopinjah: ploščati material 330 x 260 mm Obseg reza pri 90 stopinjah: kvadratni material 260 x 260 mm Obseg reza pri 45 stopinjah: ploščati material 270 x 200 mm Obseg reza pri 45 stopinjah: okrogli material 260 mm Obseg reza pri 45 stopinjah: kvadratni material 250 x 250 mm Obseg reza pri 60 stopinjah: ploščati material 170 x 170 mm Dwsdoxaav Aopfx Apwjc Obseg reza pri 60 stopinjah: kvadratni material 170 x 170 mm Obseg reza pri 60 stopinjah: okrogli material 180 mm Območje vrtljajev: 40 / 80 m/min Dimenzije traku žage: 3650 x 27 x 0,9 mm Krmiljenje: MEP Moč motorja: 1,5 / 1,8 kW Teža: 670 kg Oprema: - robusten elektro-hidravlični polavtomatski stroj za rezanje s tračno žago (INDUSTRIJSKA IZVEDBA) - z možnostjo poševnega reza od 45° v desno do 60° v levo * nastavitev kota s pomočjo velikega vrtljivega krožnika - MEP mikroprocesorsko krmiljenje EVO za nadzor vseh funkcij * spredaj desno, vrtljiv - možnost ročnega ali avtomatskega spuščanja žaginega ročaja * brezstopenjska nastavitev spuščanja žaginega ročaja - vodilo traku žage iz karbidnih plošč - hidravlična napenjalna naprava za trak žage - vključno z digitalnim prikazovalnikom vrednosti - 2x hitrosti traku žage - 1x bimetalni trak žage - hladilni sistem - 1x omejevalo kota - krtača za čiščenje ostankov - podstojna konstrukcija stroja z žepi za viličar - navodila za uporabo v nemščini Način delovanja polavtomatskega obratovanja: - elektro-hidravlično vpenjanje primeža - elektro-hidravlično spuščanje žaginega ročaja - elektro-hidravlično dvigovanje žaginega ročaja - elektro-hidravlično odpiranje primeža

Stanje: novo, Premer reza: 300 mm Območje reza pri 90 stopinjah: ploska plošča 380 x 250 mm Območje reza pri 90 stopinjah: kvadratna plošča 250 x 250 mm Območje reza pri 45 stopinjah: ploska plošča 300 x 200 mm Območje reza pri 45 stopinjah: okrogla plošča 260 mm Območje reza pri 45 stopinjah: kvadratna plošča 250 x 250 mm Območje reza pri 60 stopinjah: ploska plošča 200 x 170 mm Območje reza pri 60 stopinjah: kvadratna plošča 170 x 170 mm Območje reza pri 60 stopinjah: okrogla plošča 180 mm Območje hitrosti: 40 / 80 m/min Dimenzije traku žage: 3770 x 27 x 0,9 mm Moč motorja: 1,5 / 1,8 kW Teža: 695 kg Potreben prostor: približno 1950 x 1300 x 200 mm Oprema: - robusten elektro-hidravlični polavtomatski stroj za žaganje s trakom (INDUSTRIJSKI) - z možnostjo poševnih rezov od 45° v desno do 60° v levo * nastavitev poševnega kota prek velikega vrtljivega krožnika - krmilnik MEP z mikroprocesorjem EVO za nadzor vseh funkcij * spredaj desno, vrtljiv - ročno ali avtomatsko spuščanje žage (izbira) * brezstopenjska nastavitev spuščanja žage - vodilo za trak žage iz trdih kovinskih plošč - hidravlična napetost traku žage – vključno z digitalnim prikazom vrednosti - 2 hitrosti traku žage - 1 trak žage iz BI-kovine - sistem za hlajenje - 1 podaljšek za natančno rezanje pod kotom - krtača za čiščenje žagovine - podstavek stroja z žepi za viličar - navodila za uporabo v nemščini Način delovanja polavtomatskega stroja: - elektro-hidravlično vpenjanje primeža - elektro-hidravlično spuščanje žage Dwsdpfjxaax Dex Apwoc - elektro-hidravlično dvigovanje žage - elektro-hidravlično odpiranje primeža

Stanje: skoraj kot novo (rabljeno), Polavtomatska, elektro-hidravlična tračna žaga Dimenzije lista: 2950x27x0,9mm Žaga je primerna za razrez trdnih kovin in kovinskih profilov srednjih presekov do 280x200 mm pri kotu 0°; Razpon pri rezanju pod kotom: od 0° do 60° v levo; Z DODATNO OPREMO - ročni in ročno dinamični rezalni cikel Leto izdelave:2025 Dedpfjzlimbsx Apwewc

Stanje: novo, 2 Speeds 36/72 m/min Cutting capacity at 90 degrees (round): 300 mm Cutting capacity at 90 degrees (square): 260 mm Cutting capacity at 90 degrees (flat): 330x260 mm Cutting capacity at 60 degrees (round): 180 mm Cutting capacity at 60 degrees (square): 170 mm Cutting capacity at 60 degrees (flat): 170x170 mm Cutting capacity at 45 degrees (round): 260/200 mm Cutting capacity at 45 degrees (square): 250/180 mm Cutting capacity at 45 degrees (flat): 270x200/200x160 mm Saw blade dimensions: 3650x27x0.9 mm Total power requirement: 1.5/1.8 kW Machine dimensions: 2130x1400x1950 mm Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with semi-automatic dynamic/manual function. Equipped with MEP-30 control for mitre cuts from 45° right up to 60° left. The MEP 30 represents the latest generation of control units. Semi-automatic function: - Vice closes and motor starts - Saw head lowers for cutting - Motor switches off - Saw head rises - Vice opens Semi-automatic dynamic system: - Manual lowering of the saw bow to the desired position - Start of cycle via hand button - Upper position is saved automatically Dwjdpfx Apjyv Nmlewoc Main features: - Hydraulic unit with electric valve for high efficiency, and high-pressure hydraulic pump (200 bar) - Electronic machine monitoring with next-generation microcontroller - Centralised electrical system in the main switch cabinet - Display of alarms, diagnostics, and machine functions (cutting time, number of pieces cut, saw blade motor current, saw head position, saw blade speed, blade tension) - Manual/semi-automatic/dynamic function as standard Additional features: - Operator panel with low voltage: Membrane keypad made of polyester with thermoformed, raised buttons and confirmation control light - Manual 24V cycle selector (IP55 handle) - Complete program for all special cutting cycles - New hydraulic control device with low energy consumption and standby mode - Rotary table on roller bearing (420 mm) with preloaded thrust bearing, fitted with replaceable steel worktable - Saw bow stroke programmable directly from the control panel for material-specific adjustment - Clamping device laterally adjustable left and right, with quick-release vice - Manually operated blade tension control with display on screen via electronic transducer

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Djdpfx Ajfg E Iaspwewc Key features: - Swiveling control panel mounted on a vertical post - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Območje reza pri 90 stopinjah: okroglo 300 mm Območje reza pri 90 stopinjah: kvadratno 250 mm Območje reza pri 90 stopinjah: ploščato 380x250 mm Območje reza pri 45 stopinjah levo: okroglo 260 mm Območje reza pri 45 stopinjah levo: kvadratno 250 mm Območje reza pri 45 stopinjah levo: ploščato 300x200 mm Območje reza pri 60 stopinjah levo: okroglo 180 mm Območje reza pri 60 stopinjah levo: kvadratno 170 mm Območje reza pri 60 stopinjah levo: ploščato 200x170 mm Območje reza pri 45 stopinjah desno: okroglo 240 mm Območje reza pri 45 stopinjah desno: kvadratno 210 mm Območje reza pri 45 stopinjah desno: ploščato 280x160 mm Dimenzije tračne žage: 3770x27x0,9 mm Hitrost: 40/80 m/min Odprtina primeža: 385 mm Skupna moč: 1,5/1,8 kW Teža: 695 kg Elektrohidravlična, polavtomatska tračna žaga s polavtomatsko-dinamično, ročno funkcijo. Z upravljanjem MEP-30 za kotne reze od 45° desno do 60° levo. MEP 30 predstavlja najnovejšo generacijo krmiljenja. Polavtomatska funkcija: - Primež se zapre in motor se zažene - Glava žage se spusti za rezanje - Motor se izklopi - Glava žage se dvigne - Primež se odpre Polavtomatski dinamični sistem: - Ročno spuščanje loka žage do želene pozicije - Zagon cikla preko ročnega stikala - Zgornja pozicija se samodejno shrani Glavne značilnosti: Dsdpfx Aeyv Ntrspwswc - Hidravlična enota z elektromagnetnim ventilom z visoko učinkovitostjo in hidravlično črpalko z visokim tlakom (200 bar) - Elektronsko upravljanje stroja z mikrokrmilnikom nove generacije - Električni sistem centraliziran v glavnem električnem omarici - Prikaz alarmov, diagnostike in funkcij stroja (čas reza, število odrezanih kosov, poraba toka motorja tračne žage, položaj glave žage, hitrost tračnega lista, napetost traku) - Standardna funkcija ročno-polavtomatsko/dinamično Nekatere lastnosti: - Upravljalni panel z nizko napetostjo: membranska tipkovnica iz poliestra s toplotno oblikovanimi, dvignjenimi tipkami in signalom za potrditev - Preklopna ročica IP55 za ročni 24V cikel - Popoln program za vse posebne cikle rezanja - Nova hidravlična krmilna enota z nizko porabo energije in delovanjem v stanju pripravljenosti (stand-by) - Obratna plošča na valjčnih ležajih premera 420 mm z napetim krogličnim ležajem, opremljena z zamenljivo delovno mizo iz jekla - Hod žaginega loka je programabilen neposredno z upravljalne plošče za prilagoditev rezanemu materialu - Vpenjalna naprava pomična levo in desno, s hitrovpenjalnim primežem - Ročni nadzor napetosti traku z prikazom na zaslonu preko elektronskega pretvornika

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 435 kg Space requirement approx.: 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for monitoring all functions * Front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering Djdjw U U Uwepfx Apwswc - Saw band guides with carbide plates - Hydraulic blade tensioning – including digital display - 2x band saw speeds - 1x Bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Model designation: Shark 281 SXI evo Dwsdogvkglopfx Apwjc

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Bandsaw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic-dynamic and manual function, equipped with MEP-28 control unit for mitre cuts from 45° right to 60° left. Semi-automatic function: Upon cycle start: - vice closes and motor starts – saw head lowers for the cut – motor switches off – saw head rises – vice opens. Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button). Some features: New centralized control panel on an articulated arm, allowing the operator to operate easily from any working position. Control unit with low voltage: Polyester membrane keypad with thermo-formed, raised keys and activation status indicator. Display shows: * Diagnostics (messages in the user’s language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time taken for each cut * Saw motor current draw * Blade tension * Blade speed * Numeric display of head position. Manual 24 V cycle IP55 selector. Complete program for all special cutting cycles. Detection of additional special cutting cycles for specific applications Latest generation hydraulic control unit: highly efficient and energy-saving. Large working area with rotary table on roller bearings, 265 mm diameter with preloaded thrust bearings, mounted. Dwjdpfx Apofg E H Sowec Dual blade speed (36/72 m/min) with control Prepared for installation of an electronic inverter for continuous blade speed adjustment from 20 to 90 m/min. Stroke length of the saw bow programmable directly from the control panel, adjustable to the workpiece. Vice clamping device laterally adjustable left/right, with rapid-action vice. Manual blade tensioning control displayed on the screen via electronic converter. Base with pull-out coolant tray. Electric coolant pump for blade cooling and lubrication. Prepared for installation of a minimal blade lubrication unit (optional), in addition to standard emulsion oil lubrication. Chip removal brush. Machine designed for pallet truck transport. Length stop for repetitive cutting operations. Material support arm with roller for mounting the loading table. Bi-metal bandsaw blade for solid and section material. Tools and operating instructions in required user language.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Dsdpfx Apoxaa S Rjwswc Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 330 mm Dedpfxsfg E Ibj Apwowc Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported.

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90°: flat 510 x 320 mm Dwedpfjxaa Tzox Apwjc Cutting capacity at 90°: square 320 x 320 mm Cutting capacity at 45°: flat 350 x 320 mm Cutting capacity at 45°: round 320 mm Cutting capacity at 45°: square 300 x 300 mm Cutting capacity at 60°: flat 230 x 310 mm Cutting capacity at 60°: square 200 x 200 mm Cutting capacity at 60°: round 200 mm Speed range: 15 - 100 m/min Saw band dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Suitable for mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Rotatable, located at front right - Optional manual or automatic lowering of the saw bow * Infinitely variable saw bow descent adjustment - Carbide blade guides - Hydraulic blade tensioning – including digital value display - 2x blade speeds - 1x Bi-metal saw band - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functions: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Dwedpfx Ajfg E H Repwjc Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Model designation: Shark 282 SXI evo Dwsdpfxogvkcte Apwoc

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for monitoring all functions * Swivel-mounted, front right - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw bow lowering speed - Saw band guide with carbide plates - Hydraulic saw band tensioning including digital value display - 2 saw band speeds - 1 Bi-metal saw blade Dwsdoxaatbopfx Apwoc - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, 2 hitrosti 36/72 m/min Vpenjalna širina primeža 285 mm Območje reza pri 90 stopinjah: okroglo 250 mm Območje reza pri 90 stopinjah: kvadratno 230 mm Območje reza pri 90 stopinjah: ploščato 280x200 mm Območje reza pri 45 stopinjah: okroglo 190 mm Območje reza pri 45 stopinjah: kvadratno 180 mm Območje reza pri 45 stopinjah: ploščato 180x180 mm Območje reza pri 60 stopinjah: okroglo 120 mm Območje reza pri 60 stopinjah: kvadratno 110 mm Območje reza pri 60 stopinjah: ploščato 110x110 mm Dimenzije žaginega traku 2950 x 27 x 0,9 mm Moč 1,5 / 1,8 kW Teža 435 kg Dimenzije 1700x1000x1840 mm Polavtomatska funkcija: - Primež se zapre in motor se zažene - Glava žage se za rez spusti - Motor se izklopi Dwsdpjyv Nfuefx Apwjc - Glava žage se dvigne – primež se odpre

Stanje: novo, Model designation Djdpfx Aegvquwopwewc Shark 332-1 CCS

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. Dsdpfxefg E H Eo Apwewc - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: novo, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs by the weight of the saw arm itself, is balanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the required position for material feeding. Electrical control panel (labeled wiring connections, indicator light for operational readiness, main safety switch with provision for padlock, selector or speed change switch, emergency stop, thermal-magnetic protection, 24-volt low voltage system). Electronic tension converter for the saw band with on-screen display. Manual vice with quick-release lock. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for making identical length cuts. Dsdpfx Asfg E H Topwowc Machine is designed for pallet truck transport. Bimetal saw band for solid and profile material. Tool kit and operating instructions included.

Stanje: novo, Mere žage tračne: 3320x27x0,9 mm 2 hitrosti: 40/80 m/min Odprtina primeža: 335 mm Območje reza pri 90 stopinjah: okroglo 300 mm Območje reza pri 90 stopinjah: kvadratno 260 mm Območje reza pri 90 stopinjah: ploščato 330x260 mm Območje reza pri 45 stopinjah levo: okroglo 260 mm Območje reza pri 45 stopinjah levo: kvadratno 250 mm Območje reza pri 45 stopinjah levo: ploščato 270x200 mm Območje reza pri 60 stopinjah: okroglo 180 mm Dwodpfoyv Na Sex Apwjc Območje reza pri 60 stopinjah: kvadratno 170 mm Območje reza pri 60 stopinjah: ploščato 170x170 mm Območje reza pri 45 stopinjah desno: okroglo 200 mm Območje reza pri 45 stopinjah desno: kvadratno 180 mm Območje reza pri 45 stopinjah desno: ploščato 200x160 mm Teža stroja cca. 640 kg Potrebni prostor cca. 2140x1300x1950 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, številka stroja/vozila: 200421-16/0, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.500 kg, dolžina tračnega lista: 4.640 mm, širina tračne žage: 34 mm, TEHNIČNE PODROBNOSTI Vrsta žage: Polavtomatska Orientacija: Horizontalna Kotni rez: Da Premer reza (okrogli material): 360 mm Dedpfx Apjzrmniewewc Dolžina žage: 4.640 mm Širina žage: 34 mm Debelina žage: 1,1 mm PODROBNOSTI O STROJU Nadzor: Učenje (Teach-in) Napetost obdelovanca: Hidravlična Moč: 3,5 kW Teža za transport: 1.500 kg Transportni paketi: 1 kos OPREMA Označba CE

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 400 kg, POLAVTOMATSKI ŽAGALNI STROJ Z PNEVMATSKO OBJEMALNO NAPRAVO, MEP SHARK 280. Dwodpfx Apjz H Ixpowec