Maschinentritt Stahltreppe Stahltreppen Bautreppe / Höhe: Ca. 515 Mm nakup rabljenega (84.325)

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Nsdpfx Agshhxu Hexsla Used steel staircase / machine step Floor height: approx. 515 mm Projection: approx. 590 mm Total width: approx. 700 mm Mesh size: approx. 25 x 25 mm Material color: yellow Step dimensions: 1x approx. 675 x 250 mm (upper step) 1x approx. 475 x 250 mm (lower step) Number of steps: 2 pcs / steps laid in Step height: approx. 265 mm General information about the item: This item is offered for pick-up only. Transport or shipping of this item beyond that can be provided at additional costs, which will need to be enquired about separately depending on delivery location and scope. Our services at a glance: (Prices upon request) Assembly and installation Our general assembly terms and conditions apply. Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Stanje: dober (rabljeno), Included in delivery: 01x steel staircase Material colour: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Stringer profile: 180 x 8 mm Railings: on both sides, galvanized Handrail and knee rail: round tube Treads: chequer plate, galvanized Tread size: 1,210 x 270 mm Number of treads: 10 treads Riser height: approx. 175 mm Total stair length: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stops of the steel staircases are attached with 2 screws per side Drill hole Ø: approx. 16 mm Note: The steel staircases have been partly assembled and partly disassembled. The images are provided to illustrate the material. The steel staircases are supplied unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Nodpfxovnr Rre Agxola Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply. These costs can be provided separately depending on the place of delivery and the scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x steel staircase Material color: yellow Storey height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Handrail: on both sides Handrail and knee rail made of rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Total length of staircase: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases have been partially assembled and partially unassembled. The images are for illustration of the material only. The steel stairs are delivered disassembled. This is a used item, so scratches, dents and signs of use are possible. Your contacts in our company: Nljdovntb Sjpfx Agxoa Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Should transport or shipping be required, additional costs will apply, which can be obtained upon request depending on delivery location and scope.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Steel staircase Material color: yellow Floor height: approx. 1,945 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Stringer profile: 180 x 8 mm Railings: both sides, galvanized Handrail and knee rail: round tube Steps: checker plate, galvanized Nedpfx Aevntmnsgxsla Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Riser height: approx. 190 mm Total staircase length: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel staircases is fixed with 2 screws per side Borehole diameter: approx. 16 mm Note: The steel staircases have been delivered partially assembled and partially unassembled. The images are for clarification of the material. The steel staircases will be picked and shipped unassembled. This is a used item, therefore scratches, dents, and signs of use may be present. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for pickup. If transport or shipping is required beyond that, additional costs will be incurred, which can be requested from us separately depending on the delivery location and scope of delivery.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x U-shaped impact protection, used Material color: yellow Total height: approx. 400 mm Outer profile dimensions: U: approx. 100 x 50 mm Outer profile dimensions: U: approx. 80 x 40 mm Material thickness: approx. 6.00 mm Base plate dimensions: approx. 200 x 100 mm Borehole diameter: approx. 12 mm Number of boreholes: 04 units Nsdpfx Ajn R Edmogxsla Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Delivery or dispatch of this item is subject to additional costs, which can be determined individually depending on the delivery location and scope. Please contact us for a specific quote.

Stanje: dober (rabljeno), Included in delivery: 01x U-shaped collision protection corner, used Material color: yellow Total height: approx. 400 mm Profile dimensions external: U: approx. 50 x 50 mm Profile dimensions external: U: approx. 40 x 40 mm Material thickness: approx. 5.00 mm Base plate dimensions: approx. 300 x 100 mm Drill hole diameter: approx. 12 mm Number of drill holes: 06 pcs. Your contacts at our company: Nsdpfx Ajn R Egzjgxsla Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transport or shipping beyond that is subject to additional costs, which can be requested from us separately depending on the place of delivery or delivery scope.

Stanje: dober (rabljeno), Included in delivery: 01x U-shaped collision protection corner, used Material color: orange Nlodpfx Agsk T Au Ejxja Total height: approx. 350 mm Total width: approx. 200 mm Internal width: approx. 160 mm Total depth: approx. 360 mm Internal depth: approx. 240 mm Leg dimensions: approx. 140 x 140 mm Base plate dimensions: approx. 340 x 200 x 8 mm Material thickness: approx. 6.00 mm Bore diameter: approx. 16 mm Number of bore holes: 04 pcs. Weight / unit: approx. 14.850 kg General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be provided upon request depending on the delivery location and scope.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Scope of delivery includes: 01x Handrail post, used Material color: blue Total height: approx. 1,110 mm Total width: approx. 110 mm Total depth: approx. 62 mm Njdpfxsh Hf Rme Agxjla Base plate: approx. 120 x 110 x 12 mm (W x D x H) Diameter of round tube opening: approx. 48 mm Center-to-center hole distance: approx. 465 mm Material thickness: approx. 2 mm Weight per piece: approx. 5.07 kg Notes: - The handrail post is open at the top (viewed from above). - The heights of the round tube openings are: 565 mm and 1,030 mm (measured from the bottom edge of the base plate to the bottom edge of the round tube opening) - Suitable for round tubes with a diameter of 45 mm General information about the item: This item is available for collection only. If transport or shipment of this item is required, additional charges will apply, which can be quoted separately depending on delivery location and scope. Our services at a glance: (Prices on request) Assembly and installation Please observe our general installation conditions. Racking inspection Rack inspection according to DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Stanje: rabljeno, The scope of delivery includes: 01x Upright protection, used Manufacturer: Bito Material color: yellow Total height: approx. 715 mm Total width: approx. 99 mm Internal width: approx. 92 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 3.5 mm Weight per piece: 4.96 kg 04x Bolt M10x40 mm 04x Nut M10x40 mm 04x Spacer sleeve 14x1.5x21 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Nlsdpfstt R H Asx Agxoa General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply, which can be requested from us depending on the delivery location or scope of delivery.

Stanje: dober (rabljeno), Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in the scope of delivery: Nlsdpehputhofx Agxea 01x collision guard barrier, used Total length: approx. 2,575 mm Clear width: approx. 2,400 mm Total height: approx. 600 mm Consisting of: 02x frame profiles, used Material color: blue Profile dimensions: approx. 100 x 79 x 3.0 mm Clear width: 2,300 mm 02x posts, used Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded-on base plates: approx. 200 x 80 x 10 mm Box section: 90 x 90 mm Weight / per item: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the item: This item is offered for pick-up only. If transport or shipping of this item is required, this will incur additional costs, which can be provided separately depending on the delivery location and scope of delivery. Overview of our services: (prices upon request) Assembly, installation Please observe our general assembly conditions. Racking inspection Inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 visual inspection for all racking systems. Delivery with our own vehicle fleet (without unloading)

Stanje: dober (rabljeno), Included in delivery: 02x Rack uprights, used Material colour: Sendzimir galvanized Upright profile: 85 x 75 x 2.00 mm Upright height: 1,455 / 1,300 mm Upright depth: 1,100 mm 04x Beam levels (cross beams), used Material colour: orange Box section: 120 x 50 mm Clear span: 2,700 mm 08x Safety pins, used Design: fully galvanized 03x Wire mesh shelves, new Material colour: Sendzimir galvanized Design: laid-on shelf grids, folded on both sides Depth (direction of bearing bars): approx. 1,125 mm For upright depth: approx. 1,100 mm Clear span: approx. 965 mm Width: approx. 885 mm Support edge for beams: approx. 65 mm Nedpfx Agedvgxioxela Mesh size: approx. 95 x 45 mm Wire gauge: approx. 4.5 mm Maximum load capacity: up to 800 kg (evenly distributed load) 03x Trapezoidal sheets, grade II Outside colour: RAL 8012 red-brown Inside colour: similar to off-white Sheet length: 1,500 mm Sheet width: 1,075 mm Effective cover width: 1,035 mm Profile: 35 / 207 01x Verge angle, new Length: 3,000 mm Material colour: RAL 8012 red-brown Dimensions: 100 x 100 mm Thickness: 0.75 mm Design: 90° bent 25x Screws 5.5 x 40 mm A2 Max. drilling capacity: 13 mm With 16 mm sealing washer, drill tip and ETA-13/0183 approval 06x Screws 4.8 x 20 mm Galvanized, self-tapping For timber substructure Technical data for firewood shelter: Total width: approx. 2,900 mm Total depth: approx. 1,515 mm Total height: approx. 1,535 mm Storage volume: approx. 3.15 m³ Information: The images provided are sample pictures for illustrative purposes of the construction. The material colour of the uprights and beams shown may differ. General information regarding this item: This item is offered for pickup only. If transport or shipping is required, additional costs will apply. These can be requested from us, and will be quoted separately depending on delivery location and scope.

Stanje: novo, Leto izdelave: 2026, Le contenu de la livraison comprend : 01x rehausse de montant, neuve Couleur du matériau : galvanisé électriquement Exécution : universelle Hauteur totale : env. 657 mm Hauteur utile : env. 500 mm Extensible en profondeur de 600 à 1 150 mm Profil du cadre : profilé en L 45 x 45 mm Épaisseur du matériau : env. 5,00 mm Profilé carré : 25 x 25 x 1,50 mm (extérieur) Profilé carré : 20 x 20 x 1,50 mm (intérieur) Pas d’ajustement : 25 mm Dimension des trous : 5 x 25 mm Poids | pièce : env. 6,87 kg Vos contacts au sein de notre entreprise : M. Andre Evering M. Mario Klöver M. Falk Deutsch Nodpfx Ajvbbtiegxela Informations générales sur l’article : Cet article est proposé uniquement pour enlèvement. Un transport ou une expédition de cet article entraîne des frais supplémentaires, qui peuvent être précisés selon le lieu de livraison ou la quantité à livrer.

Stanje: rabljeno, Bending tool, die, lower blade, lower tool, prism tool, reversible prism, one-piece die block for press brake, die tool, hemming tool - Tool: for press brake, die tool / hemming tool - Dimensions: see drawing in the photos - Measurements: 150/101/H75 mm / 150/77/H159 mm - Weight: 7.2 kg / 11.4 kg Nledpfxogwhvas Agxea

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section Nedsmhhypopfx Agxela 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) Njdpfx Asmhh Dhogxola - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany Nljdpomhh Dzsfx Agxja - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) Nlsdjmhhx Ijpfx Agxsa - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing Nlodpfjmhhyaox Agxea - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments Njdpoh Ek Daefx Agxola - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing Nodpfx Aomhh Anogxola - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Nsdpfxsmidyfe Agxola Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level. Njdpfomkixwex Agxela

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times Njdpfx Agjmhhf Sexola - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Nodpfxemhhl Hs Agxela Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. Nledemhh Dtjpfx Agxoa According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.