Mütek Mgz 1030 nakup rabljenega (385)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade projection, suitable for hard and soft materials + 22 kW motor + Effective square cutters/blades *For pallets: up to a maximum of 10 pallets per hour *Depending on screen and material. Considerably higher throughput with smaller residual wood. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Godpex Af Rdefx Ai Aoiu Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: colour of the machine may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown when rotor is idling - 70-90 rpm for high throughput performance - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-dampening machine feet - CE compliant The following options are available at an extra charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged hopper extension 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral impurities. Damage to the tools and/or increased wear may result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives Giodpfxedv Eu Hj Ai Aou *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: novo, Leto izdelave: 2026, Delivery time: Approx. 4-5 months Your advantages: + Extremely large cutting chamber opening: 1300 x 1200 mm + Special rotor suitable for both hard and soft wood + Energy efficient and powerful with 37 kW start-up output Technical specifications: Color: grey / blue Feed opening on top (mm): 1,300 x 1,200 Hopper volume (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40; selectable Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (L x W x H) Approx. weight (kg): 3,500 Options available at extra cost: - Second row of knives, for up to 30% higher throughput - High-speed hydraulics, for increased throughput - Conveyor belt discharge preparation - Conveyor belt - Overband magnet HAWK-EYE *To shred veneer or paper (materials thinner than 3 mm) we recommend a segmented floor. Special option available at extra cost. --- Slider extension option *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the cutting chamber opening on the top is 1300 x 1700 mm; surcharge +14,975) *significantly longer production time required. Gisdpjgbkkrefx Ai Asu *Larger machines available upon request. --- Raw material requirements: - Moisture content (oven-dry) must be below 20% - The feed material must be free of metals and mineral impurities. Otherwise, tool damage and/or increased wear may occur.

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Gjdpfx Asd E R D Sei Ajiu Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40 mm, reversible multiple times, Rotor diameter: 260 mm, Control unit: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 cbm, Hydraulically operated pusher, Screen perforation as required (15–40 mm), Extraction port Ø 160 mm, Weight: approx. 1,300 kg, Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options available at extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for sectional floor, 4-sided + €2,170 net (Prevents pusher blockage. Recommended when shredding plastics, paper, veneer with thickness < 3 mm). Gedpfx Aijgmfa As Aoiu - Raise shredder by 30 cm (ready for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Conveyor belt and overband magnet controls + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc., leads to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder, and we will document the test with photos and videos.

Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa. . Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni, Premer rotorja: 260 mm, hidravlično vodeno potisno kolo Sito po izbiri (12 - 40 mm) Priključek za odsesavanje Ø 160 mm Teža cca 1.100 kg Mere (d x š x v) cca 1805 x 1118 x 1650 mm Barva: modra / siva Zahteve za surovino: - Vsebnost vlage (atro) mora biti pod 30 % - Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo. . Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi. Gisdpfjwzarcjx Ai Aju

Stanje: rabljeno, Machine de broyage MGZ 1330, 37 kW Heures de fonctionnement : 275 Inclus : - 2ème rangée de couteaux - Hydraulique rapide, pour un débit accru - Préparation pour bande transporteuse En option : - Bande transporteuse avec séparateur automatique de métaux Vos avantages : + Ouverture du caisson de coupe extrêmement grande : en haut 1300x1200mm + Rotor spécial adapté pour bois dur et bois tendre + Économique en énergie et puissant, avec 37 kW au démarrage Gsdpjx Tfdhefx Ai Ajiu Données techniques : Ouverture d’alimentation (en haut, mm) : 1.300 x 1.200 Volume de la trémie (m³) : 1,6 m³ Diamètre du rotor (mm) : 368 Vitesse du rotor (tr/min) : 65 - 125 Puissance requise (kW) : 37 Tamisage (mm) : selon accord Outils : 37/70 couteaux Diamètre de la buse d’aspiration (mm) : 200 mm Dimensions (LxLxH) : 2430x2410x1735 mm Poids (env. kg) : 3 500 --- Exigences pour la matière première : - La teneur en humidité (atro) doit être inférieure à 20 % - L’alimentation doit être exempte de métaux et d’impuretés minérales. Des dommages aux outils et/ou une usure accrue risque d’en découler.

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Giodjv Rpxlepfx Ai Aju Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Giedpjv Sqrpsfx Ai Aeu Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle - Rotation speed 70-90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm Gsdpfsgl Nlmex Ai Aoiu - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts. Included features: + Optimized cutter geometry + Customized pusher control + Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit) Gsdpfx Aiogmh H Tj Aoiu Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 40x40 mm, multiple rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an extra charge: - Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net - Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net - Overband magnet: +€6,980 net - Conveyor belt and overband magnet control: +€2,750 net (Start and stop synchronized with the shredder) We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Gedpfx Aisd Nm Sis Aoiu Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Giodpfx Aiechqxxs Asu Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Giedpfjchuvrex Ai Aou Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Gjdpfxsfci D As Ai Aeiu Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic size reduction Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wood pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced torque loading) - Minimal cutting gap between rotor and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Input material should be max. approx. 500 x 500 mm (height less critical) Hydraulically operated pusher Screen perforation as desired (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage shredding system with downstream MVZ granulator (screens 5–15 mm) is recommended Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Additional options (at extra charge): - Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €1,980 net - Inclined conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Conveyor and overband magnet control + €2,750 net (start/stop synchronized with shredder) - Alternatively, manual start/stop on the conveyor belt + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contamination such as sand, stones, etc. result in increased wear. We are happy to offer a free test with your material at our site in Neckartailfingen. Alternatively, you can ship your material to us and we will document the testing with pictures and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic, extremely hard, or heavy plastics—this would negatively impact the system's durability. --- Optionally, larger machines are available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Input material should be max. approx. 720 x 700 mm (height less critical) From €39,995 net *Options upon request Gjdpfod H R Sxjx Ai Aeiu Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Input material should be max. approx. 900 x 700 mm (height less critical) From €49,975 net *Options upon request Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Input material should be max. approx. 1,200 x 700 mm (height less critical) From €79,975 net *Options upon request

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Giodpogfm Ryefx Ai Aeu Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Gisdpfx Aioxfwds Aeu Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: novo, Leto izdelave: 2025, Ideal for shredding straw, polystyrene (EPS), leaves, hay, and bread. Throughput strongly depends on the screen and input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 Volt (Other options available on request: 9.2 kW or 15 kW) Optional: *Surcharge for the next larger machine with an 18.5 kW motor and larger silo diameter: + €2,750 (net) Robust steel construction, hardened cutting blades, screen with replaceable inserts, available perforations: (10), 15, 22, 26, 30, 40, or 60 mm For electric drive, equipped with star-delta switch, overload protection, and 8 m ready-to-plug-in power cable, 150 mm discharge nozzle, suitable for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires, approximate dimensions: 1200 x 900 x 1270/1400 mm (LxWxH) weight approx. 240 kg Spare parts prices & options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Lid: €290 each (net) Gedezbizepfx Ai Aeiu Polystyrene disc: €600 each (net)

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Giedpfjdubpusx Ai Aou Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Demonstration machine with approx. 9 operating hours Another machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput performance We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15 pieces, reversible multiple times, Optional double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening 630 x 820 mm Hopper volume approx. 0.6 cbm Hydraulically operated pusher Screen perforation of your choice (10–40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when rotor idling - Rotor speed 70–90 rpm for high throughput - Timed control to avoid idle times Gijdpfx Aisb Ny Eys Asu - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder accessories for extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco Rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or materials less than 3 mm in thickness) - Angled conveyor belt + €8,770 net Angle: adjustable 0–60 degrees Discharge height: approx. 2,000 mm - Automatic overbelt magnet + €5,980 net - Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content) - Conveyor and overbelt magnet control + €2,750 net (Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net Raw material requirements: - The moisture content (dry basis) must be below 30% - Installation temperature: heated room with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: novo, Leto izdelave: 2026, Consisting of bale breaker for large bales type MHB and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (approx. 15 weeks production time) Suitable for round or square bales. Includes frequency converter (FU) – this controls the speed of the scraper floor. The bales are placed on the scraper floor and the feed of the milling unit is activated. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the combination of the bale breaker and straw shredder is recommended here. Technical data of the bale breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill and the kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Scraper floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Godpfeb Nulhex Ai Ajiu Surcharge for the even larger straw shredder (18.5 kW): +€2,750 net Technical data, MHZ with special hopper: 15 kW 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts, optional perforations: (10, 12, 15), 22, 30, 45 mm With star-delta switch, overload protection, and 8 m connection cable ready to plug in Discharge nozzle: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras at a surcharge: Feed screw: +€970 net Cyclone (suspension to be installed by customer) *Should be installed no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve (makes the material pressureless): +€5,750 net Control system: from €1,620 net Special extension for the bale breaker 3 m (other sizes on request) +€9,750 net Briquetting press MPP 180 S; lightly used demonstration unit 70 mm briquettes – up to a maximum of 100 kg/h from €39,700 net * Larger machines available on request --- Description: The muetek bale breaker was developed for breaking up round and square bales of hay and straw. The attached shredder attached to the bale breaker shreds straw from all cereal varieties, hay, maize, and miscanthus. The muetek machines of the MHZ/MHB series stand out due to their robust design and heavy-duty construction. muetek MHB series bale breakers are equipped with a chain conveyor on which the straw bale is placed using a front loader. The platform is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, and the feed speed is adjustable. The milling rotor is equipped with multiple teeth that tear apart the straw bale. The straw separated from the bale is expelled. --- Basically, the machines are suitable for dry feedstocks: – Straw – Hay --- Processing hemp is only possible with a special bale breaker Surcharge approx. €9,720 net * depending on version. Shredding hemp is not possible with the straw mill. Requirements for the feed material: Moisture content max. 12%

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput is highly dependent on screen and input material: - Up to 60 kg/h with EPS using a 15 mm screen Giodeh S H T Uspfx Ai Aou *The coarser the screen, the higher the throughput. Motor: 9.2 / 11 kW, 400 Volt Robust steel construction Hardened cutting blades Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready Blow-out nozzle 150 mm, optional for plastic or grain pipes Blowing range approx. 12 m Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare parts and options: 24 hardened blades, each €9.90 (net) 6 bolts, each €14.90 (net) 1 screen €475 (net) Cover €290 (net)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for trade fair demonstration unit *Available upon request New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 Giodsd Su Hxepfx Ai Aju *Approved for indoor installation *Both individual machines are fully produced and in stock; only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front sleeve: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height: 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option - press plier cooling: no Option - hydraulic oil cooling: yes Option - level monitoring: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Stanje: dober (rabljeno), Used, good condition. Technically inspected second-hand machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (such as toys and chewing material for pigs), animal feed, alfalfa, or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (depending on material) (e.g., sawdust with a bulk density of 250 kg/m³) Accurate statements on throughput are only possible after testing with your material. Actual output may vary significantly depending on the bulk density of the starting material. Customs tariff number: 84793010 Briquette Ø 65 mm Including 2 m press channel Gsdofmqq Eopfx Ai Asiu Main motor power: 37 kW Feed screw geared motor: 2.2 kW Compression screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with hour counter in the switch cabinet Machine has CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3800 kg Optional extras at additional cost: Temperature control unit for press tools To maintain temperature for optimum briquette quality. Includes temperature controller for pump, cooling unit, fan, pressure switch. Pre-wired, ready to connect – mandatory for operation Including corresponding control system + €7,850 net Guillotine or tablet breaker For cutting briquettes + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. Conveyor line/cooling section (nominal: 4x2m) Each 2 meters €990 net Installation/commissioning (estimated 2-3 days onsite) Billed based on effort and separate calculation. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday/night hour: 50% surcharge Each Sunday/holiday hour: 100% surcharge Daily allowance per technician: depending on country Per car/van and travel kilometer: €0.98/km Travel and accommodation charged to client according to receipts or via flat rate. Test run with customer-specific material: (by arrangement, up to a maximum of 750 kg) – €1,970 net flat rate Raw material requirements: - Moisture content (atro) must be between a minimum of 6% and maximum of 15% - Chip length maximum 18 mm - Installation temperature: heated room at minimum +5°C - Feed material must be free from metals and mineral contamination. Damage to the press tools and/or increased wear may result