Kundig Enorm Win nakup rabljenega (2.229)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + shoe elements * From above: - 2 pressure, slip, metal rollers - pressure unit - sanding unit: 2 metal rollers + shoe - slip pressure roller - feed belt * From below: - feed belt - 2 metal, slip, smooth rollers - pressure unit - sanding unit: 2 metal rollers + shoe - 3 metal, slip, smooth rollers - Electric height adjustment for sanding Hnjdpjx Rqr Sjfx Agijk - Oscillation of sanding belts - Pneumatic belt cleaning - Stepless feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2×0.37 kW - Main motors: - upper – 5.5 kW - lower – approx. 5.5 kW - Air requirement: 6–8 bar - Extraction connector diameter: 4×100 mm - Overall dimensions (LxWxH): 2340×1420×1920 mm - Weight: 1480 kg – For short workpieces (overlapping belts) – German production – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price subject to change in case of significant exchange rate fluctuations)

Stanje: rabljeno, Delovna širina pribl. 1.300 mm Število brusnih enot: 2 kos Maksimalna debelina obdelovanca: pribl. 150 mm Motor: 18,5 & 15 kW Hjdpfx Ajypwarogijnk Širokopasovni brusilni stroj Kündig tip ENORM 1300-2 za natančno umerjanje in fino brušenje masivnega lesa, furnirja in lesnih materialov. Robustna industrijska izvedba z dvema brusnima enotama in čistilno krtačo omogoča visoko odstranitev materiala in natančno kakovost površine v pohištveni in notranji opremi. Idealno za obrtna in industrijska podjetja z visokimi zahtevami glede kakovosti, vključno s kompletom brusnih trakov.

Stanje: rabljeno, Kündig Brilliant-2 1100 REd-Lack Quality product from Switzerland Constant Table Machine / Automatic Head Adjustment Wide-Belt Calibrating and Fine Sanding Machine 1st sanding unit with rubber contact roller, proven hardness 2nd sanding unit DIAGONAL with segmented sanding pad 22 mm 2 belt drive motors, 15 kW and 11 kW, with soft start Working width: 1100 mm Lacquer sanding package Contact roller height infinitely adjustable according to abrasive grain scale Pneumatic lifting/lowering of the contact roller as per unit selection Hnsdpfsyzxpgjx Agiek Entire sanding pad assembly can be angled by 10° Vacuum system for the entire worktable with extra perforations for smaller workpieces Automatic thickness adjustment across the entire working width Infinitely variable stock removal control Electronic feed rate control on operating panel, stepless 3 - 15 m/min PLC control/programming with color touchscreen and TEACH-IN memory Workpiece support table with support rollers at the infeed and outfeed ENORMATIC: Fully automated quick adjustment with feed release Eco*-Energy-saving mode Error diagnosis Pass-through height: 200 mm Infinitely variable sanding belt speed on 2nd unit with PLC memory Nozzle system for cleaning sanding belt of 2nd unit, operation controlled Electronic sanding pad, segment width 22 mm (pivoting special version) First delivered in 2018, from lease return Machine is WORKSHOP TESTED and IN TOP / AS-NEW CONDITION Available from stock Lieboch

Stanje: rabljeno, Kündig ENORM PRIMO – TOP STROJ S KONSTANTNO MIZO / samodejni pomik glave Širokopasovni kalibrirno-dokončevalni brusilni avtomat Kombinirana enota: kontaktni valj in pnevmatska brusilna blazina Enormatic Digitalni prikaz debeline obdelovanca Moč motornega pogona traku cca 9 kW Nivo kontaktnega valja brezstopenjsko nastavljiv po lestvici zrnatosti Vhodna in izhodna miza z valjastimi nosilci Delovna širina 1100 mm Podajalna hitrost 2,5 - 15 m/min Hedjyyltcepfx Agisnk Stroj je popolnoma obnovljen v delavnici Na voljo na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2000, rabljeni podajalnik Letnik izdelave: 2000 primeren za robno brusilko Kündig Uniq Tehnični podatki: maks. izpust: 1050 mm število podajalnih valjev: 4 premer valja: 120 mm širina valja: 60 mm hod vzmeti valjev: 25 mm število stopenj hitrosti: 8 (2/4/5,5/6,5/11/13/16,5/33 m/min) Hnjdpfxeumpp Es Agijk motor: 0,75 kW napajanje: 400V/50 Hz teža: 32,5 kg konzola, prikazana na sliki, ni vključena v dobavo! Lokacija: Flörsheim Dobavljivost: takoj

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Tračna brusilna naprava, izdelana leta 2014. Kundig Premium-1 1100-C ima moč 12,76 kW in deluje s priključno napetostjo 400 V AC. Če iščete visokokakovostni brusilni stroj, razmislite o modelu Kundig Premium-1 1100-C, ki ga nudimo v prodaji. Kontaktirajte nas za več podrobnosti. • Priključna napetost: 400 V AC • Krmilna napetost: 24 V DC • Tokovna poraba: 26,25 A • Frekvenca: 50 Hz Hnodpfjyxqpasx Agiok • Moč: 12,76 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 1.395 h, Calibration and fine finishing automatic sander, Kundig Brilliant wide belt sander with electronic segmented sanding pad, tiltable sanding unit, and lacquer sanding capability. A video of the machine in operation can be provided upon request. Ideal sanding machine for interior construction companies, also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic segmented pressure beam. Edge segments can be switched on and off. Segment width of the pressure beam 22mm (ideal for intermediate lacquer sanding). Pneumatically adjustable calibration roller, grooved rubber roller with grain compensation. Drive motor 11kW. Infinitely variable cutting speed 3 - 15 m/s via frequency inverter. Conveyor belt feed rate steplessly adjustable from approx. 3 to 15 m/min. Belt blow-off device controlled by the workpiece. Constant table height approx. 950mm by adjusting the machine’s upper part; thus also integrable into sanding lines. Feed belt is still very grippy and in excellent condition. Carpet with adjustable vacuum fan, allowing safe holding of small parts. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Abrasive belt dimensions 1120 x 2000mm. Infeed and outfeed roller tables. Hood lock. Extraction connection 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine operation. Parameters: belt speed, feed speed, workpiece height, belt blow-off nozzle, vacuum fan, calibration roller adjustment, and the parameters of the segmented sanding pad. Thickness measuring system with adjustable material removal and Enormatic automatic thickness setting with feed initiation, eliminating the need for constant re-measuring with calipers. Programs for different sanding tasks can be stored and selected via SmartSelect. CE marking. Operating manual. Hnsdpfxjyxg N Ne Agijk 2 sanding inserts included. The four bellows have been replaced. Without the pictured connection cable. Original paint, only a few spots retouched. Very good condition from a small business. The machine has approx. 1395 operating hours, about 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (LxWxH). Weight approx. 2300kg. With large mobile storage table at belt height for storing abrasive belts. Table size approx. 1520 x 1360 x 950mm. Including various sanding belts from K80 to K400. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this supplier."

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Hodpow Naansfx Agienk Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: nepreverjeno, hitrost pomika os X: 25 m/min, višina obdelovanca (maks.): 180 mm, širina obdelovanca (maks.): 1.000 mm, Nižje cene ni – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Največja širina obdelovanca: 1.000 mm Minimalna debelina obdelovanca: 3 mm Maksimalna debelina obdelovanca: 180 mm Največja hitrost podajanja: 25 m/min Enota 1 Hnsdsyttyvopfx Agijk Enota: kombinacija valja/pada Material: guma Enota 2 Enota: vertikalni pad PODATKI O STROJU Moč motorja: 1,2 kW OPREMA Delovna miza s fiksno višino Delovna površina Podajalni trak Stroj se prodaja in dostavlja v stanju, v kakršnem je dejansko in pravno (“videno in všečano”), na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico blago pred prevzemom pregledati ter prevzema odgovornost za montažo, zavarovanje in uporabo stroja na ciljni lokaciji. Zunanja referenca: 6385

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Tračna brusilka, izdelana leta 2015. Ta Kundig Premium-1 1100K ima napajalno napetost 400 V AC in krmilno napetost 24 V DC. Deluje s tokom 24,90 A in ima moč 12,62 kW. Če iščete visokokakovostno brusilko, priporočamo razmislek o stroju Kundig Premium-1 1100K, ki ga ponujamo v prodajo. Kontaktirajte nas za več informacij. • Napajalna napetost: 400 V AC • Krmilna napetost: 24 V DC • Tok: 24,90 A • Moč: 12,62 kW Hnodsyt Rlpepfx Agiek • Frekvenca: 50 Hz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 3.551 h, skupna širina: 1.790 mm, skupna višina: 2.150 mm, skupna masa: 2.300 kg, največja dolžina izdelka: 1.690 mm, This Kundig Premium-2 1350-RG wide belt sander was manufactured in 2018. It is equipped with a steel roller and a rubber roller, complemented by a belt discharge system. The accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Take this opportunity to purchase this Kundig Premium-2 1350-RG wide belt sander. Please contact us for more information about this machine. Additional Equipment • Steel roller • Rubber roller with attachment for needle roller (unused) • Belt release system Machine Advantages Technical advantages of the machine • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity not specified) • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Maximum current consumption RP/RE: 36 A • Maximum current consumption RE-L: 56 A • Required minimum slow-blow fuse RP/RE: 40 A • Required minimum slow-blow fuse RE-L: 63 A • Cable cross-section, reduced load RP/RE: 5x6 mm² • Cable cross-section, reduced load RE-L: 5x10 mm² • Cable cross-section, proper sizing RP/RE: 5x6 mm² • Cable cross-section, proper sizing RE-L: 5x10 mm² • Extraction port for 1st unit RP/RE: 180 mm diameter • Extraction port for 1st unit RE-L: 180 mm diameter • Extraction port for 2nd unit RE-L: 180 mm diameter • Extraction port for belt cleaning RE-L: 150 mm diameter • Required total extraction port diameter RP/RE: 200 mm • Required total extraction port diameter RE-L: 300 mm • Airspeed at extraction outlets RP/RE: 22 m/s • Total airflow for dust extraction RP/RE: 2000 m³/h • Total airflow for extraction RE-L: 5400 m³/h Hnjdpex D E I Eefx Agiok • Negative pressure RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for belt or workpiece blowing per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Maximum workpiece width RP/RE: 1350 mm • Minimum workpiece thickness RP/RE: 4 mm • Maximum workpiece pass-through height RP/RE: 200 mm • Working height including machine base RP/RE: 910 mm • Feed speed range RP/RE: 3–15 m/min • Overall length of the machine RP/RE: 1690 mm • Overall length of the machine RE-L: 1850 mm • Overall width of the machine RP/RE: 1790 mm • Machine height including base and extraction nozzle RP/RE: 1950 mm • Maximum machine height with base and extraction nozzle RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Additional information Machine still powered up

Stanje: zelo dobro (rabljeno), obratovalne ure: 4 h, Funkcionalnost: popolnoma funkcionalen, barvni kanali: CMYK + 2x WHITE + 2x VARNISH, število tiskalnih glav: 8, loèitev (maks.): 6.001.200 DPI (pik na palec), širina papirja (maks.): 2.500 mm, The digital printer delivers top print quality thanks to its LED-UV curing system and eight 6th-generation Ricoh print heads in a CMYK + 2x WHITE + 2x VARNISH configuration. With this machine, you can print items at a speed of 30 m²/hour, such as: -> Ceramics; -> PVC panels; -> Corrugated cardboard or plastic. Maximum print width on a single item is 2,500 mm. The plotter is equipped with ONYX RIP software, a Panasonic servo motor, and a TAIWAN HIWIN linear motor. Specifications of the YC2500HR Large-Format Printer: - Substrate types: PVC, metal sheets, glass, wood panels, acrylic, ceramics, wallpaper, corrugated cardboard, plastic - RIP software: ONYX Software - Print heads: Ricoh 6th generation - Number of print heads: 8 - Head configuration: CMYK + 2x WHITE + 2x VARNISH - Maximum print width: 2,500 mm - Print resolution: 300*900 dpi, 600*600 dpi, 600*900 dpi, 600*1200 dpi - Print speed: 30 m²/hour - Ink type: UV ink - Curing system: LED UV - File formats: TIFF, JPEG, Postscript, EPS, PDF - X-axis drive: TAIWAN HIWIN linear motor - Servo motor: PANASONIC - YC2500HR printer manual: JAPAN THK - Encoder: Metal Renishaw UK - USB interface: 2.0/3.0 - Input voltage: single phase, 220V ± 10% (50/60 Hz, AC) Hnodsmrqy Uepfx Agisk

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 650 mm, Oprema: Na voljo je tipska ploščica, Kündig Botop, sanding unit above: roller, pneumatically-operated pad; sanding unit below: roller, pneumatically-operated pad. The machine has been completely overhauled: new conveyor belt and new rollers. Hnjdpfx Ajvmt D Rogijk

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism - Infinitely variable chip removal adjustment Hjdpfx Ajk Dpp Ssgisnk - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Brusilni agregat s kontaktnim valjem DIAGONAL agregat s segmentnimi brusilnimi blazinicami (širina segmenta 35 mm) 2 motorja z 15 in 11 kW, 400V Prehodna višina 200 mm Hnedpfx Agex Eh Svsisk Konstantna delovna višina (nastavitev zgornjega dela stroja) Dimenzija brusilnega traku 1350 x 2000 mm Samodejna nastavitev debeline ENORMATIC SPS krmiljenje z zaslonom na dotik in števcem delovnih ur Stroj v izvedbi ZA VMESNO BRUŠENJE LAKA Pnevmatsko dviganje/spuščanje kontaktnega valja Vakuumska naprava komplet z integriranim ventilatorjem Brezstopenjsko podajanje prek zaslona na dotik Brezstopenjska hitrost brusilnega traku in pihanje traku na drugem agregatu Pogonski valj brusilnih blazinic gumiran Dimenzije stroja cca 1.800 x 1.800 x 2.100 mm (DxŠxV) Teža cca 2.800 kg

Stanje: zelo dobro (rabljeno), Širokopasovni stroj 1100 mm, 2-pasni valj, brusilni čevelj, samo 3280 ur, nastavitev zgornjega dela Hsdpfxexbntfj Agijnk

Stanje: novo, Leto izdelave: 2025, Nova stroj Leto izdelave 2025 enostranski robni brusilni stroj ročno preklapljanje z brušenja masivnega lesa na furnir patentirana naprava z zložljivimi prisloni z oscilacijo brusnega traku z ročnim nagibanjem brusne enote 0–45° po lestvici Motor 2,2 kW Oscilacijski hod 5 mm Delovna miza 400 x 1100 mm Širina brusnega traku 150 mm Priključek za odsesavanje 100 mm Tlorisna površina 600 x 1080 mm Hodpfxex Rv Dyj Agisnk Teža cca 400 kg Razpoložljivost: takoj Skladišče: Flörsheim

Stanje: novo, Leto izdelave: 2025, Kündig Edge Sanding Machine Uniq-S Edition 30 In Top Condition - Immediately Available - - Complete sanding unit tiltable up to 45 degrees motorized, without any table adjustment required - Feed system integrated into the machine frame, transport belt 50 mm wide on the bottom, pressure rollers 60 mm diameter on top, motor 0.55 kW, infinitely variable speed 3 – 15 m/min - Double-sided operation with straight and contour sanding sides - Sanding belt size: 200 x 2000 mm - Sanding belt drive motor: 3 kW, 380 V, 50 Hz - Oscillation stroke programmable 10 – 90 mm Hnsdpfx Agjvk R Areijk - CE compliant/Dust tested Standard configuration Kündig Uniq-S Accessories: - Q4 Auxiliary Table for Belt Drive Roller - Q6 Semi-circular Table for Belt Drive Roller - Z04 Table Extension Location: Available ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Hedjfig Rwepfx Agisnk Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" Hnedpfx Agehqb Rcsiok 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Features and technical specifications: - Robust, space-saving 2-belt wide-belt sander for demanding calibration and fine sanding applications - Consistent working height thanks to top-section adjustment - Working width: 1350 mm - Top sanding, with two sanding units - 1st unit equipped with grooved rubber contact roller of proven hardness - Pneumatically (program-controlled) adjustable contact roller, roller height steplessly adjustable via abrasive grit scale - 2nd unit with electronically-controlled segmented sanding pad, segment width 35 mm, featuring quick-change glide strips - Parallel spring-mounted, ground steel pressure roller at infeed - Rubber-coated pressure rollers between sanding units and at outfeed - 15 kW (20 HP) motor, 400 V/50 Hz with soft start for reduced start-up current - Motorized, finely adjustable height setting with digital display - Belt tensioning, tracking and oscillation via pneumatics, compressed air consumption approx. 4 l/min - Optimum safety via automatic instant stop with disc brake in case of belt breakage - Workpiece feed motor 0.75 kW (1.0 HP) with fabric-reinforced rubber feed belt - Complete electrical system with contactor control; automatic star-delta start for main motor, motor protection and ammeter for monitoring stock removal - Pass-through height: 200 mm - Abrasive belt size: 1350 x 2000 mm Comfort features: - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with immediate feed stop and automatic elevation of the machine top section - Infinitely adjustable stock removal - Electronic feed regulation via operator panel, continuously variable 3 – 15 m/min - PLC control/programming with color touch screen and TEACH-IN memory (recorded at the push of a button, according to sanding result; no manual input required) - Pneumatic belt tracking control Hsdpeuhiq Dsfx Agienk - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated fast setting and feed solution - eco*-energy-saving mode - Fault diagnostics - Job and operating hours counters Machine in E-Plus version (RE) Including foldable outfeed table extension 1350 mm, without infeed plate Location: Solingen Availability: short notice

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside of our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Features and technical data: • Intermediate lacquer sanding (Cd-L) version • Robust, space-saving single-wide belt sander designed for demanding calibration and final sanding • Constant working height ensured by upper section adjustment • Working width: 1350 mm • Overhead sanding with combination unit • Complete sanding unit tiltable up to 10° • Grooved rubber contact roller with proven hardness • Infinitely adjustable contact roller height with abrasive grit scale • Pneumatic lifting/lowering of the contact roller based on aggregate selection • Sanding pad with quick-change sliding coating • Parallel spring-loaded, ground steel pressure roller at infeed • Rubber-coated pressure roller at outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz; soft start for low current draw on startup • Motorized, finely adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatic; compressed air consumption approx. 2 l/min • Optimum safety with automatic emergency stop via disc brake in the event of belt breakage, belt misalignment, loss of pressure, or opening of belt entry door • Workpiece feed motor 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum unit for work table with small parts area, integrated fan in machine base • Complete electrical system with contactor control; automatic star-delta starting of main motor, motor protection and ammeter for monitoring material removal • Maximum workpiece height: 200 mm • Belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the entire working width • Workpiece over-thickness protection with feed emergency stop and automatic lifting of main unit • Stepless adjustment of material removal rate Hsdpekwhxiefx Agijnk • Electronic feed control at operator panel, stepless 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory function (results saved with button press based on sanding result, no manual input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: fully automatic quick setting and feed initiation (very useful for large workpieces) • eco*-energy saving mode • Fault diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (special pivoting version) - Variable sanding belt speed (programmable memory) - Air nozzles for sanding belt cleaning, operationally controlled, additional extraction port - Additional sanding shoe insert for lacquer sanding Includes swiveling air knife Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Edge sanding machine with integrated double conveyor feed system for solid wood parts, veneer edges, and curved workpieces, featuring full unit oscillation. Processing of solid and veneered edges either manually or via automatic feed. - On the veneer sanding side, material is guided along two adjustable fence plates (the infeed fence features integrated extraction slots and is finely adjustable according to a scale based on stock removal), onto an elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two return rollers), with infeed fence extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid sanding side, workpieces are sanded against the continuous, glide-coated sanding belt backing, table size 1180 x 325 mm, including miter gauge with scale. - On the front side, optionally equipped with a quickly installable semi-circular table (with extraction holes) for sanding against the rubber-coated drive roller, Ø 90 mm, resting radius 300 mm. - At the drive roller, optionally equipped with a quickly mountable cast iron auxiliary table (with extraction holes), 400 x 500 mm, mounted on an oscillating spindle for use with sanding rollers Ø 25, 30, 40, and 45 x 100 mm for external and internal curves, with protective cover for the spindle. Design: Robust machine base with heavy-duty cast-iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented design), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, programmable oscillation stroke from 10 to 90 mm, electrical cabinet integrated in frame, constant belt tension with automatic length compensation, adjustable belt tracking, touch guard plate, dust extraction via two extraction hoods, flexible hoses and a common internal pipe leading to a Ø 150 mm connection flange, recess in base for easy machine movement with pallet jack or forklift; belt width 150–200 mm, belt length 2000 mm, working height 830 mm (solid wood sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the machine base, two parallel conveyor belts underneath, spaced 250 mm apart, belts 50 mm wide, upper pressure rollers 20 mm wide, motor 0.55 kW (0.75 HP), infinitely variable speed control from 3 to 15 m/min. Hodpfx Agsw Tfx Deisnk COMFORT version Kündig UNIQ-S Includes: Table extension UNIQ/UNIQ-S/Flash Includes: Upward extraction duct for UNIQ without shutter Includes: Semi-circular table for drive roller UNIQ-S Availability: Short term Location: Flörsheim

Stanje: novo, Leto izdelave: 2023, Exhibition machine Hnjdpfsxvnmnsx Agiek Year of manufacture: 2023 Features and technical data: - Double-sided operation with surface and contact grinding side - Abrasive belt size: 200 x 2000 mm - Belt drive motor: 3 kW - Oscillation stroke programmable: 10-90 mm - Grinding unit motorized tiltable up to 45 degrees - CE-compliant / dust-tested Accessories: - Semicircular table at the belt drive roller Dimensions (LxWxH): 1800 x 1000 x 1500 mm Weight: 610 kg Location: Solingen Availability: short notice

Stanje: dober (rabljeno), Leto izdelave: 2010, • Simultaneous top and bottom sanding: with roller and pneumatic sanding shoe units • Double-sided processing of parts: in a single pass • Above-average working speed, reduced labor input, excellent surface finish • Working width (mm): 1100 Hnodow A R U Rspfx Agisk • Feed drive: 1.5 kW each, frequency-controlled • Height adjustment: 0.75 kW each • PLC: Omron • Vacuum: 1.5 kW • Enormatic: Automatic measurement of workpiece thickness, fully automatic adjustment and automatic start of feed and sanding process