Brusilni stroj za robove

Kündig Uniq

Stanje: novo, Leto izdelave: 2025, Kündig Edge Sanding Machine Uniq-S Edition 30 In Top Condition - Immediately Available - Gjdpfxovk R Arj Afqjbg - Complete sanding unit tiltable up to 45 degrees motorized, without any table adjustment required - Feed system integrated into the machine frame, transport belt 50 mm wide on the bottom, pressure rollers 60 mm diameter on top, motor 0.55 kW, infinitely variable speed 3 – 15 m/min - Double-sided operation with straight and contour sanding sides - Sanding belt size: 200 x 2000 mm - Sanding belt drive motor: 3 kW, 380 V, 50 Hz - Oscillation stroke programmable 10 – 90 mm - CE compliant/Dust tested Standard configuration Kündig Uniq-S Accessories: - Q4 Auxiliary Table for Belt Drive Roller - Q6 Semi-circular Table for Belt Drive Roller - Z04 Table Extension Location: Available ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, RLA 400 VIBER Performance: 11,300 m³ Capacity: approx. 11,300 m³/h Motor Power: 11 kW / 15 HP Speed: 3,000 rpm Suction Speed: 32 m/s Extraction Port Diameter: 355 mm Filter Material: Polyester Filter Permeability: 5 micron Filter Size: 160 x 935 mm Number of Filters: 58 Chip Bin Size: 500 x 500 x 600 mm – 3 units Voltage: 380 V Dimensions: 1,000 x 3,000 x 2,300 mm Weight: 630 kg Sound Level: 85 dB (disconnected) / 70 dB (connected) + €850 for models with fire extinguisher (Safe System) + €1,350 for models with inverter (speed control) Gbedpfxelkd Tfs Afqog

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Edge sanding machine with integrated double conveyor feed system for solid wood parts, veneer edges, and curved workpieces, featuring full unit oscillation. Processing of solid and veneered edges either manually or via automatic feed. - On the veneer sanding side, material is guided along two adjustable fence plates (the infeed fence features integrated extraction slots and is finely adjustable according to a scale based on stock removal), onto an elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two return rollers), with infeed fence extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid sanding side, workpieces are sanded against the continuous, glide-coated sanding belt backing, table size 1180 x 325 mm, including miter gauge with scale. - On the front side, optionally equipped with a quickly installable semi-circular table (with extraction holes) for sanding against the rubber-coated drive roller, Ø 90 mm, resting radius 300 mm. - At the drive roller, optionally equipped with a quickly mountable cast iron auxiliary table (with extraction holes), 400 x 500 mm, mounted on an oscillating spindle for use with sanding rollers Ø 25, 30, 40, and 45 x 100 mm for external and internal curves, with protective cover for the spindle. Design: Robust machine base with heavy-duty cast-iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented design), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, programmable oscillation stroke from 10 to 90 mm, electrical cabinet integrated in frame, constant belt tension with automatic length compensation, adjustable belt tracking, touch guard plate, dust extraction via two extraction hoods, flexible hoses and a common internal pipe leading to a Ø 150 mm connection flange, recess in base for easy machine movement with pallet jack or forklift; belt width 150–200 mm, belt length 2000 mm, working height 830 mm (solid wood sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the machine base, two parallel conveyor belts underneath, spaced 250 mm apart, belts 50 mm wide, upper pressure rollers 20 mm wide, motor 0.55 kW (0.75 HP), infinitely variable speed control from 3 to 15 m/min. Gsdpfxew Tfx Ds Afqjbg COMFORT version Kündig UNIQ-S Includes: Table extension UNIQ/UNIQ-S/Flash Includes: Upward extraction duct for UNIQ without shutter Includes: Semi-circular table for drive roller UNIQ-S Availability: Short term Location: Flörsheim

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations Gbedpfxjfig Rwo Afqsg 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.200 h, Funkcionalnost: popolnoma funkcionalen, Razrezovalka plošč Holzma HPP 380 Profiline z avtomatskim etiketirnikom. Gsdpjxytlksfx Afqobg

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" Gedpfohqb Rcex Afqsbg 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Godpfx Afsg A D Ansqebg Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Fully automatic electronic control with program selector switch FLUSHING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of the dowel feed rate - Closed glue system with 6 bar glue pressure via glue nozzle - Selector switch GLUE/WATER for flushing/cleaning the glue system with EasyClean function button Gbedpfx Afev Aubpoqog (automatic cleaning program for glue hose and glue nozzle via spray funnel and wastewater collection tank) - 1 stainless steel container for 7.5 kg glue, and 1 stainless steel container for 7.5 l water for flushing/cleaning incl. 1 gun for dowels Ø 8 mm Dowel length 25 - 40 mm Glue / dowel insertion tool has been completely overhauled and has not been used since.

Stanje: dober (rabljeno), Leto izdelave: 2014, Industrijski robot Proizvajalec: Kuka Tip: KR60L30-3 Letnik: 2014 Približno 15.600 ur Gbjdpfxjn Uv Dio Afqsg Doseg: 2429 mm Teža: 665 kg Nosilnost: 30 kg Kuka krmilnik KRC4 Teža: 150 kg Programska oprema V8.3.40 Kuka zaslonska plošča na dotik Kuka povezovalni kabli 101225ä

Stanje: dober (rabljeno), Leto izdelave: 2019, Industrijski robot Proizvajalec: Kuka Tip: KR60 HA Leto izdelave: 2018/2019 Malo delovnih ur Doseg: 2033 mm Teža: 665 kg Nosilnost: 60 kg Kuka krmilnik KRC4 Gbodpfjn Utbgsx Afqog Teža krmilnika: 150 kg Programska oprema V8.3.40 Kuka zaslon na dotik Kuka povezovalni kabli 101225ä