Stroj za brušenje robov - vseljivo takoj

Kündig Uniq-S

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. Iodpshqb Rcefx Af Tjal The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Location: In stock at 54634 Bitburg - Immediately available -

Stanje: rabljeno, Leto izdelave: 2018, Industrijski robot Proizvajalec: Universal Robots Tip: UR10 Leto izdelave: 2018 Vključno z nadzornim sistemom in ročno upravljalno napravo (novo) Ijdpfx Asxpt Nusf Teal 251125

Stanje: novo, Leto izdelave: 2025, New machine Iajdpow Tfx Dofx Af Tel Year of manufacture: 2025 Edge sanding machine with integrated double conveyor feed system for solid wood parts, veneer edges, and curved workpieces, featuring full unit oscillation. Processing of solid and veneered edges either manually or via automatic feed. - On the veneer sanding side, material is guided along two adjustable fence plates (the infeed fence features integrated extraction slots and is finely adjustable according to a scale based on stock removal), onto an elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two return rollers), with infeed fence extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid sanding side, workpieces are sanded against the continuous, glide-coated sanding belt backing, table size 1180 x 325 mm, including miter gauge with scale. - On the front side, optionally equipped with a quickly installable semi-circular table (with extraction holes) for sanding against the rubber-coated drive roller, Ø 90 mm, resting radius 300 mm. - At the drive roller, optionally equipped with a quickly mountable cast iron auxiliary table (with extraction holes), 400 x 500 mm, mounted on an oscillating spindle for use with sanding rollers Ø 25, 30, 40, and 45 x 100 mm for external and internal curves, with protective cover for the spindle. Design: Robust machine base with heavy-duty cast-iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented design), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, programmable oscillation stroke from 10 to 90 mm, electrical cabinet integrated in frame, constant belt tension with automatic length compensation, adjustable belt tracking, touch guard plate, dust extraction via two extraction hoods, flexible hoses and a common internal pipe leading to a Ø 150 mm connection flange, recess in base for easy machine movement with pallet jack or forklift; belt width 150–200 mm, belt length 2000 mm, working height 830 mm (solid wood sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the machine base, two parallel conveyor belts underneath, spaced 250 mm apart, belts 50 mm wide, upper pressure rollers 20 mm wide, motor 0.55 kW (0.75 HP), infinitely variable speed control from 3 to 15 m/min. COMFORT version Kündig UNIQ-S Includes: Table extension UNIQ/UNIQ-S/Flash Includes: Upward extraction duct for UNIQ without shutter Includes: Semi-circular table for drive roller UNIQ-S Availability: Short term Location: Flörsheim

Stanje: dober (rabljeno), Drilling capacity in steel (diameter): 25.0/30.0 mm Throat depth: 260 mm Quill stroke: 120 mm Spindle speed range: 80–1400 rpm Table clamping surface: 410 x 390 mm Total power requirement: 0.8/1.5 kW Machine weight: approx. 250 kg Space requirement: approx. 0.75 x 0.6 x 1.15 m Iajdpfx Afjuhhzhs Tsl

Leto izdelave: 2008, Stanje: generalkompletno obnovljen (rabljeno), BOPP od 15 do 200 mikronov Papir od 60 do 200 g/m² Podprta folija od 100 do 200 g/m² Iajdpfxjxbp Iks Af Tsl Karton od 100 do 350 g/m² Aluminij od 12 do 50 mikronov

Stanje: dober (rabljeno), Na zalogi različne škarje za karton, delovne širine od 110 do 150 cm, v dobrem stanju, takoj na voljo. Ijdpfx Ash S H Itjf Tjal

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Numerično krmiljeni obdelovalni center WINLINE WINLINE je sodoben in inovativni obdelovalni center, namenjen proizvodnji komponent za lesena okna in vrata. WINLINE izvaja celoten delovni cikel, vključno z nalaganjem/razkladanjem ter pozicioniranjem obdelovancev za vse potrebne operacije, pod neposrednim nadzorom NC (numeričnega krmiljenja). Ta nova raven integrirane avtomatizacije omogoča najvišjo stopnjo natančnosti. Ijdewnx Agepfx Af Tsal Stroj je prava "en-človek tovarna": upravlja ga en sam operater, izvede celoten postopek na vsakem obdelovancu brez potrebe po ponovnih obdelavah, od štirikotno skobljanih delov do končnih kosov, pripravljenih za sestavljanje in lakiranje. Operatorju omogoča tudi čas za izvedbo dodatnih faz v izdelavi okna: profiliranje, rezanje na mero, sestavljanje elementov na vpenjalnem stroju, montaža okovja, vstavljanje stekel itd. WINLINE lahko izdela katerikoli sestavni del okna, z vsemi vrstami spojev (negativni profil in mozničenje, mehansko vijačenje, odprti čepi, zaprti čepi ...). Stroj omogoča najvišjo možno produktivnost v vsakem posameznem primeru. Vpenjalne naprave so zasnovane za popolno stabilnost obdelovancev in najvišjo raven natančnosti, zagotavljajo enakomerno kakovost površine pri vseh operacijah ter odpravijo vse sledi ali drsne poškodbe na končnih delih, kot se to lahko pojavlja pri tradicionalnih sistemih zaradi trenja in premikanja obdelovancev po vodilih. Obdelovalne skupine WINLINE so zasnovane za težke obremenitve in zagotavljajo visoko zanesljivost. Stroj je v celoti združljiv s katerimkoli CAD/CAM sistemom, kar omogoča neposreden prenos "iz projekta neposredno v izvedbo in proizvodnjo". Osnovna oprema stroja vključuje: - Premično portalno konstrukcijo in dvojno Y-os z neodvisnimi vozički - Manipulator za obdelovance: nalaganje, razkladanje in menjava vpenjal - Avtomatski sistem za mazanje - Večconni sistem - Samodejno premikanje nosilcev plošč - Trakasti transporter za odstranjevanje odrezkov in kosov - Numerično krmiljenje - Namizni osebni računalnik s 3D grafično kartico in LCD zaslonom - Električna oprema s klimatizacijo - Dokumentacija - Oprema za vzdrževanje - Oddaljena tipkovnica - Industry 4.0 – integracija s tovarniškimi sistemi

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Gluing system: EVA Iaodol Txw Hepfx Af Tol Joint milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 units

Stanje: novo, Leto izdelave: 2025, Construction size: 5 Nominal heat output: 145 kW -- Complies with BImSchV Stage 2 and CE standards -- Combustion chamber fully lined with refractory material For rooms up to: 3,800 m³ (according to DIN) Fuel types: Firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 35 - 40 kg/h Fan air output (free-blowing): 9,400 m³/h Isdedlhcrspfx Af Teal Air outlet opening: Ø 700 mm Flue connection: Ø 220 mm Weight: 1,950 kg SPS control cabinet: 380 Volt

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Iajdeuxqzujpfx Af Tsl Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)