Faymonville 6-Achs Multimax Satteltieflader - Hydr. Gelenkt nakup rabljenega (68.659)

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area Rsdpfx Aporgzv Njbeu * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels Rsdpfx Apoxarmaebou * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) Rjdstx Nwnepfx Apbsu * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, največja dovoljena obremenitev: 51.780 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our entire range of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the specification. Full specification available on request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front control panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * One mounting hole in the rear upper section of the gooseneck outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck: plug-in aluminium tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on the gooseneck * 2-inch king pin * One crosswise stake pocket rail fitted in the deck of the gooseneck before the bevel, for plug-in stakes, approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in loading platform and bevel to accommodate excavator stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd and 4th axle steering * 3rd and 4th axles with electro-magnetic reversing lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing gear with 2-speed gearbox and crank * Continuous hardwood floor covering on loading platform and between axles (approx. 50 mm thick), increases friction coefficient * 1 intermediate table with a recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the loading platform's outer frame (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the outside of the front cross member, turned approx. 90° inward towards the loading area (LC 10,000 daN) * Extendable galvanized widenings, approx. 230 mm per side (without wooden planks) * 1 pair of fixed wheel recesses open to the extension, approx. 700 x 410 mm (W x D) in the loading platform in front of the 1st axle * Between 2nd and 3rd axle: 1 pair fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) Rsdpsyhkrlofx Apbeu * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF twin tires – brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood flooring, hydraulically foldable ramp tips * Ramps hydraulically movable by approx. 235 mm outwards and approx. 215 mm inwards, individually * Hardwood flooring on the loading platform’s bevel * Ramp with hardwood flooring BRAKING SYSTEM: * WABCO EBS-E braking system compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% a

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) Redpfey Auh Isx Apbou EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 Rjdpoxtc Uhjfx Apbsu - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment details available upon request. GOOSENECK: * Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * On the gooseneck and rear chamfer: grating floor with 5 mm steel reinforcement * 2 inch king pin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917) * One pair of plug-in ALU side boards on gooseneck, approx. 400 mm high, anodized finish * One LED work light each mounted top left and right on the front wall, operated by on/off switch (control via tractor unit is not possible in this case) LOADING PLATFORM: * Platform length approx. 9,600 mm, with rear chamfer approx. 900 mm x 6° * Platform behind the gooseneck hydraulically liftable/lowerable, length approx. 3,000 mm, load capacity approx. 9,000 kg * Continuous grating floor on both lift bed and platform with approx. 5 mm steel base as additional reinforcement, suitable for point loads TYRES: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steering * 3rd axle with electro-magnetic reverse lock triggered by reverse gear and manual activation * 1st axle with start assist * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve HYDRAULIC LOADING RAMPS: * One pair of two-piece AXS steel ramps with grating surface, approx. 4,920 mm long and approx. 900 mm wide * Hydraulically folding ramp tips * Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward * Flashing lights on the outer edges of ramp tips, switch next to ramp controls * Ramp safety in road position via quick release * Painted sand coating on ramp frame and ramp tip Rodpfx Apsy Auhhjbou * Mechanical drop-leg type supports on the sides of the ramps for stability when docking to unloading ramps * Ramp operation valves located on the right side of the vehicle BRAKE SYSTEM: WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection PAINTWORK: * Trailer in carmine red (RAL 3002) * Rims silver gray * Side boards in bare aluminum * Wheel hubs according to axle manufacturer * Lamp panel pure white (RAL 9010) EQUIPMENT: * Removable front wall made of steel, approx. 1,600 mm high, with supply line connection strip to tractor approx. 1,000 mm from bottom edge of outer frame profile * Lashing chain fixing options on the inside left and right of the front wall, including aluminum trays below left and right for storing chains or tensioning straps * Behind the front wall, approx. 12 mm thick DELIGNIT panel, bolted * 2 additional pairs of bolt-on lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pull capacity, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, including cable pressure roller

Stanje: novo, največja dovoljena obremenitev: 38.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment list. Full specification available upon request. EQUIPMENT: * Gooseneck, approx. 4,100 mm long, with central beam * Extendable loading platform, approx. 9,400 mm long, with rear bevel approx. 350 mm x 10° and integrated hook-in strip for attaching loose aluminium access ramps * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the current platform length * Technical fifth-wheel load: 18,000 kg * Suitable for 4x2 and 6x2 tractor units * TPMS tire pressure monitoring system in accordance with ECE R 141 Rodpjy Augdjfx Apbou * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand subject to availability * ASPÖCK-UNIBOX * 3 kW electro-hydraulic pump unit for controlling hydraulic functions. Without installation of supply ports on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - the first three pairs lying flat (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 2 inch kingpin * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load approx. 50,000 kg * Approx. 32 mm timber floor on gooseneck and platform, encased in aluminium omega profiles * 10 pairs of recessed lashing rings, foldable outward, in the outer frame of the platform * In front of the last axle and on the rear cross member of the semi-trailer, 1 pair of lashing rings each (LC 10,000 daN) * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the platform, for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the loading platform, on the right in the direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform, left side in direction of travel * Bevel at the rear cross member of the vehicle, approx. 350 mm x 10° * Integrated hook-in strip for loose aluminium access ramps at the rear cross member of the vehicle * 1 pair of drop-in supports at the rear cross member * Remote steered axles from the front and rear using cable remote control, with single-track axle alignment, no installation required in the tractor unit * Round NATO socket at the front connector socket panel (Maeler & Kaege VG 96 917) * 1 LED work light on each side, left and right, mounted on the front wall with wiring to the connector socket for the tractor unit * On the extension an additional locking point every 500 mm * Holder for plug-in stakes, for storage when not in use, inside the front wall of the gooseneck * 4 wheel chocks with holder under the loading platform * Galvanized, sliding width extensions, extendable by approx. 230 mm per side (without timber planks) * 1 LED work light each side, left and right, in front of the axles with wiring to the connector socket for the tractor unit * 2 axle load gauges mounted on the left-hand side including axle load diagram * 1st axle with traction aid * Mounts for warning signs under the gooseneck and at left and right on the rear cross member * A

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) Rjdpfx Apoyhkquebju - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm Rodpewvzg Refx Apbeu * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: rabljeno, lastna masa: 9.600 kg, največja dovoljena obremenitev: 30.400 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2011, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles steered, ABS (anti-lock braking system), extendable, lashing rings, attachable loading ramps, front support, rear support, side aluminium underrun protection, storage box. Body: 4-axle low-bed semi-trailer with attachable loading ramps, SAF axles, 3rd and 4th axles steered, 13 pairs of lashing rings, 10 pairs provisions for insertable stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm load height in the low-bed area, low-bed length retracted approx. 9,500 mm, TÜV inspection due, aluminium ramps available at an extra charge of EUR 1,500. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted. Rodoxxkqzepfx Apbeu

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer Redpfx Aezahp Sepbeu * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6 x 4 or 8 x 4 Lowbed: * Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking * Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length * 7 pairs of folding lashing rings outward (LC 10,000 daN) * 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings Rear chassis: * Rear chassis with closed outer frame and tread plate cover Rodpfjy Uwu Iox Apbju * Chassis with excavator recess, closed in the rear half to house air tanks * 3 pairs of folding lashing rings outward (LC 5,000 daN) * 1 pair of folding lashing rings outward (LC 10,000 daN) * 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F) Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Coating: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit) * Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks * Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings * Electrohydraulic unit * Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit * Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer * At the gooseneck front and rear left and right, each with a holder for warning signs, including socket * Manual and documentation on USB stick * Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control * On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * Separate air connection with air gun on the gooseneck * A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Rsdpfxog Sk Trj Apbsu Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina Rsdewta Aljpfx Apbsu

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno * Sledilna krmiljena os * Hidravlične nakladalne rampe * Zračno vzmetenje -----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Rodpfxjx I Uyhj Apbju Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko

Stanje: rabljeno, Leto izdelave: 2014, Contact Theo Lelie for further information. Rsdpfx Apextqkwsbju

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Ladeflächenlänge Gesamt ca: 8.200 mm, Tiefbett ca: 6.000 mm lang, Ladehöhe bel. ca. 890 mm, 22 x Zurrösen je 10 t, 10 x Rungentaschen im Aussenrahmen, Auffahrrampen (ca. 3.100 x 750 mm), Kletterleiste Aussenseite an der Rampen und Heckschräge, Auffahrrampen seitlich verstellbar, Holzboden 68 mm stark, Staukiste mit Deckel für Zurrketten oder Spanngurte, Konturmarkierung nach Vorschrift, Rundumleuchte, Fahrzeug Tauchbad- Feuerverzinkt, incl. Achslastanzeigen, Aufpreis für: Warntafeln mit Beleuchtung und Rundumleuchte, Verbreiterung auf 3 m mit Holzer, Preis: 500 €, Hydraulische Verschiebung der Rampen, Preis: 1.000 €, Baggerstiehlmulde, Preis: 1.000 € netto, -- Druckfehler, Irrtümer und Änderungen vorbehalten, Muster- Bilder--, Mehr Daten unter: !, More Details: ! Redpfxjza A Rke Apbju

Stanje: rabljeno, lastna masa: 7.420 kg, največja dovoljena obremenitev: 37.580 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2019, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70 R 17,5, velikost zadnje pnevmatike: 245/70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 56 x lashing rings, loading platform length (high bed) approx. 3,850 mm, loading platform length (low bed) approx. 9,600 mm, loading height 880 mm, 4 x central stanchions, 8 x stanchion pockets in the outer frame, surcharge for aluminium ramps: 900 €, vehicle is sold on behalf of the customer. -- Errors in printing, mistakes, and changes reserved, sample images --, More data available at: !, More Details: ! Rjdpfx Aoza A N Hopbsu

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl.: 8.200 mm, Nizkopodno pribl.: 6.000 mm dolgo, Nakladalna višina obremenjena pribl.: 890 mm, 22 x privezne ušesce po 10 t, 10 x žepe za stranice v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 750 mm), plezalna letva na zunanji strani na rampi in zadnjem naklonu, nakladalne rampe nastavljive vstran, lesen pod 68 mm debel, skladiščna škatla s pokrovom za privezne verige ali napenjalne trakove, kontura označena po predpisih, opozorilna luč, vozilo vroče cinkano v potopni kopeli, vključno z indikatorji obremenitve osi, doplačila za: Opozorilne table z osvetlitvijo in opozorilno lučjo, razširitev na 3 m z lesenimi elementi, cena: 500 €, izrez za roko bagra, cena: 1.000 € neto. Napake pri tisku, spremembe in pomote so pridržane, vzorčne slike. Več podatkov na: !, Dodatne informacije: ! Rodpfx Apjzakibsbsu

Stanje: rabljeno, lastna masa: 7.300 kg, največja dovoljena obremenitev: 37.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 --/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 --/140J, velikost zadnje pnevmatike: 235/75R17,5 --/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Reinforced design, high bed length approx. 4,180 mm, low bed length approx. 9,400 mm, loading height approx. 900 mm, 12 stake pockets in the outer frame, 3 cross stake bars, 14 lashing eyes, 4 pairs of container locks for either 2 x 20 ft ISO containers or 1 x 40 ft ISO container, -- Subject to misprints, errors, and changes, sample images --, More data available at: !, More details: ! Rodpfx Apszaclzebou

Stanje: novo, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Ojačana izvedba, zračno vzmetenje z dvižno osjo, manometer za obremenitev osi, dolžina visokega ležišča cca 3.500 mm, dolžina nizkega ležišča cca 8.800 mm, višina nakladanja cca 900 mm, za 2- in 3-osne vlačilce, prednja stena cca 800 mm visoka, 16 žepov za količke v zunanjem okviru, 32 pritrdilnih ušes, rampa dolga cca 4.200 mm (2-delna), hidravlično pomikanje ramp, rampe za prevoz preko labodjega vratu. -- Napake v tisku, pomote in spremembe pridržane, vzorčne slike --. Več podatkov na zahtevo! Rjdpfxey U H Epj Apbju

Stanje: novo, lastna masa: 8.050 kg, največja dovoljena obremenitev: 36.950 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vroče pocinkano, ojačana izvedba, zračno vzmetenje z dvigalno osjo, manometer za osno obremenitev, dolžina visokega ležišča cca 4.180 mm, dolžina nizkega ležišča cca 9.400 mm, višina nakladanja cca 900 mm, prednja stena cca 1.600 mm visoka, 14 rež za količke v zunanjem okviru, 3 prečne letev za količke, 24 pritrdilnih obročev, 4 pari zapiral za zabojnike za 2 x 20 ft. ISO zabojnika ali 1 x 40 ft. ISO zabojnik, doplačilo za alu rampe = cena: 1.900 €, -- tiskarske napake, pravica do sprememb in napak pridržana, vzorčne slike --, Več podatkov na: !, More Details: ! Redpfey U Hzqex Apbeu

Stanje: rabljeno, lastna masa: 11.130 kg, največja dovoljena obremenitev: 36.870 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5 140J, velikost zadnje pnevmatike: 235/75 R 17,5 140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 4 kolesne vdolbine s pokrovi, pritrdilne zanke, elektro-hidravlična črpalka za rampe in podporo, -- pridržujemo si pravico do tiskarskih napak, sprememb in nepravilnosti, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Rodpey Ulg Eofx Apbou

Stanje: rabljeno, lastna masa: 10.720 kg, največja dovoljena obremenitev: 37.280 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, naslednji pregled (TÜV): 02/2027, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5 ---/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70 R17,5 ---/141J, velikost zadnje pnevmatike: 245/70 R17,5 ---/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, popolnoma prevozen, -- pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Rjdpfey Ulf Uox Apbsu