En Stolpec - Luknjač nakup rabljenega (16.447)

Stanje: rabljeno, Leto izdelave: 1994, Punching force: 20 t Total power requirement: 4 kW Machine weight approx.: 2.8 t Space requirements approx.: 3.2 x 1.4 x 1.45 m Punching diameter: max. 105 mm Sheet thickness – max.: 6 mm Stroke length max.: 25 mm Voltage: 380 V Frequency: 50 Hz Nodpfjh Ra Rnex Aqqjwh Connected load: 4 kVA Punching diameter: max. 105 mm Input unit: 0.01 mm

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Nwsdpfx Aqofx Hv Hjqsh Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: rabljeno, Leto izdelave: 1987, številka stroja/vozila: 5347, Pressure: 10 t Throat depth: 180 mm Stroke: 8–60 mm Strokes per minute: 180 spm Table surface: 400 x 340 mm Table height above floor: 935 mm Table through-hole: 80 mm Nodpecxxygsfx Aqqjwh Ram adjustment: 40 mm Ram surface: 180 x 110 mm Total power requirement: 1.1 kW Machine weight approx.: 0.6 t Space requirement approx.: 1.2 x 1.5 x 2.0 m - Two-hand and foot operation - Control cabinet

Stanje: rabljeno, Leto izdelave: 1979, Pressure: 64 t Throat depth: 315 mm Stroke: 8–100 mm Strokes per minute: 140 spm Table size: 820 x 630 mm Table height above floor: 800 mm Nwsdpfjcxxmfjx Aqqsh Ram stroke adjustable min. / max.: 8–100 mm Ram adjustment: 63 mm Total power requirement: 7.5 kW Machine weight approx.: 4.8 t Space requirement approx.: 1.45 x 1.70 x 3.10 m

Stanje: rabljeno, Leto izdelave: 1967, Pressure: 80 t Throat depth: 280 mm Stroke: 20-120 mm Table width: 710 mm Table depth: 560 mm Ram dimensions: 560 x 355 mm Ram adjustment: 72 mm Strokes per minute: 125 Total power requirement: 9.5 kW Njdpjcxxrhefx Aqqowh Machine weight approx.: 4.4 t UVV (accident prevention regulation)

Stanje: rabljeno, Pressure: 70 t Throat depth: 250 mm Stroke: 10 - 120 mm Table size: 750 x 500 mm Installation height: 350 mm Ram adjustment: 350 x 200 mm Strokes per minute: 50 Passage (WxH): 310 x 370 mm Total power requirement: 5 kW Machine weight approx.: 3.5 t Space required approx.: 1.3 x 1.4 x 2.5 m - Tiltable C-frame eccentric press - Tie rod design with UVV-compliant movable safety guard - Pneumatic clutch - 4-way guided ram - Separate control cabinet Nsdpfx Aqecxxttsqjwh - Central lubrication - Electric two-hand operation - Emergency stop safety function

Stanje: rabljeno, Leto izdelave: 1953, številka stroja/vozila: 66/53, Pressure: 36 t Outreach: 280 mm Stroke: 6 - 82 mm Ram adjustment: 51 - 13 mm Njdpfx Aqecxxwceqowh Strokes: 6-82 strokes/min Table surface: 530 x 480 mm Through-opening in clamping plate: Ø 140 mm Clamping plate thickness: 70 mm Ram surface: 200 x 200 mm Clamping plate: 530 x 450 mm Space requirement approx.: 1.0 x 1.65 x 1.80 m WEINGARTEN Flywheel Eccentric Press with UVV safety guard, manufacturer DITTMER PSK 103/B, year of manufacture 1978, additional clamping plate 530 x 450 mm (clamping plate thickness: 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Nwsdpfx Aqscxxx Hoqoh Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t

Stanje: rabljeno, Leto izdelave: 1997, Pressing force: 40 t Throat depth: 280 mm Ram stroke: 8–120 mm Strokes per minute: 120 spm Throat depth: 280 mm Clearance: 350 mm Installation height: 270 mm Table size: 710 x 565 mm Njdpjcxxmgjfx Aqqewh Ram area: 500 x 280 mm Total power requirement: 2.2 kW Machine weight approx.: 3.2 t

Stanje: novo, Pressure: 17.0 kN Stroke: 40 mm Throat depth: 110 mm Working height (min–max): 70–220 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight approx.: 60 kg Dimensions (L x W x H): 310 x 190 mm Toggle-lever pneumatic presses Including fine adjustment of working height via bevel gear and side crank — convenient and easy to set. Nsdpfxefv Avvo Aqqewh Toggle-lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: novo, Pressure 26.0 kN Stroke 60 mm Nwjdpfx Aofv Avroqqjh Throat depth 110 mm Working height from 70 to 250 mm Table size 190 x 140 mm Spindle diameter 30 mm Machine weight approx. 46 kg Dimensions (L x W x H) 310 x 140 x 475 mm Toggle Presses SPECIAL PRICE!!! HK 2600, stroke 60 mm, incl. fine adjustment of working height via bevel gear with side handwheel – convenient and easy to set up. Stand height 475 mm Achieve even more pressing force in production without additional effort. Maximum pressing force just before end of stroke thanks to toggle lever mechanism. Especially robust spindle head and stand construction.

Stanje: novo, Pressure: 34.0 kN Stroke: 40 mm Throat depth: 130 mm Working height (min. – max.): 80 – 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Nedofv Avyspfx Aqqewh Toggle lever pneumatic presses Including fine adjustment of the working height via bevel gear with side-mounted handwheel, comfortable and easy to set. Toggle lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Leto izdelave: 1990, stanje: rabljeno, Pressure: 80 t Throat depth: 250 mm Stroke: 5/95 mm Table surface: 805 x 510 mm Distance table/ram, stroke down: 400 mm Ram bore: 45 mm Ram adjustment: 100 mm Ram surface: 360 x 300 mm Stroke rate: 55 strokes/min Total power requirement: 5.5 kW Machine weight approx. 4 t Space requirement approx. 0.83 x 1.7 x 2.6 m Nwodpfx Aqjfn Aqnsqoh - Ram counterbalance The machine is scheduled to be partially overhauled in our facility next year (dismantling, inspection, new painting, new wiring, new control cabinet).

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations Nwodpfxscubats Aqqoh - operating manual available

Leto izdelave: 1990, stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Nedped Nl E Ujfx Aqqswh Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Leto izdelave: 1971, stanje: rabljeno, Pressure: 160 t Throat depth: 440 mm Stroke: 20 - 120 mm Table size: 1050 x 750 mm Strokes: 42 and 62 strokes/min Ram area: 800 x 500 mm Nwodpjcyc Adefx Aqqoh Pin hole (depth x diameter): 85 x 50 mm Pass-through opening in table: 355 mm Installation height (stroke down, ram adjustment up): 455 mm Ram adjustment: 100 mm Machine weight: approx. 11.2 t *with gear train *with fixed work table *with enlarged table and ram area *with enlarged throat depth *with pass-through in the frame *with ram weight compensation The machine is currently being overhauled and the clutch is being disassembled for this purpose. (The press is currently in a disassembled state)

Leto izdelave: 1977, stanje: rabljeno, Pressure: 40 t Outreach: - mm Stroke: 8 - 90 mm Table dimensions: 630 x 430 mm Ram adjustment: 60 mm Njdpfxjb U Hxfs Aqqewh Maximum stroke rate: 65 strokes/min Total power requirement: kW Machine weight approx.: 2,480 kg Space requirement approx.: m - Gear drive - Tiltable - Table clamping plate - Mechanical overload protection in the ram (shear plate) - Pneumatic clutch

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Passage opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Nodpfxeb U Hwms Aqqowh Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m Nsdpjb U Hwpjfx Aqqowh - Ortlinghaus pneumatic clutch/brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Nodpfx Aqjb U Hwneqjwh Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: rabljeno, Pressure: 63 t Outreach: - mm Stroke: 16 - 125 mm Table size: 800 x 600 mm Working capacity: 250 Cutting area: 1600 mm² Table adjustability: 220 mm Total power requirement: 6 kW Machine weight approx.: 5 t Distance table/ram: 562 mm Machine is being dismantled and partially overhauled - new paintwork - new control cabinet - conversion for safe operation Njdjch Umcjpfx Aqqewh - refurbishment

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 Clamping plate: 570 x 450 x 65 mm Total connected load: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m Nsdjb U Hwtepfx Aqqswh - Hydraulic clutch-brake combination - Central lubrication (Vogel) - Cam control (Balluff) - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Stanje: rabljeno, Pressure: 55 t Nodpfx Aocp Apyoqqewh Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Stroke rate: 120 strokes/min Ram adjustment: 55 mm Ram surface: 290 x 210 mm Ram bore: 40 H7 mm Through-hole in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Mechanical overload protection in ram (shear plate) - Control cabinet with touchscreen - Foot switch

Leto izdelave: 1980, stanje: rabljeno, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table size: 875 x 695 mm Ram area: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30–90 spm Gap between uprights: 450 mm Machine weight approx.: 6.2 t Space requirement approx.: 2.0 x 2.1 x 3.2 m Installation height (stroke bottom, ram adjustment top): 480 mm Further information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: Nwsdpfxsdlcy Hs Aqqjh * Free-standing control cabinet with touchscreen incl. cabling * New paint finish of individual components when dismantled After the partial overhaul, the machine is safe for manual loading operation at open tooling; prior to delivery, a current UVV safety inspection and brake time measurement will be performed.

Stanje: novo, Pressure 17.0 kN Njdpfxofv Avnj Aqqowh Stroke 60 mm Throat depth 105 mm Working height from 75 to 180 mm Table surface 170 x 130 mm Spindle diameter 25 mm Machine weight approx. 35 kg Dimensions L x W x H 260 x 130 x 415 mm Toggle Presses SPECIAL PRICE!!! HK 1700, 60 mm stroke, with crank and fine working height adjustment Stand height 450 mm Achieve even higher pressing force in production—without additional physical effort. Toggle lever technology provides maximum pressing force just before the end of the stroke. Exceptionally robust design of spindle head and frame.