Ekscentrični stiskalnici - en stolpec

AMBOLD PEEV 25.3

Stanje: dober (rabljeno), Leto izdelave: 2018, Manufacturer: INDUCTAFLEX Model: AL-3e Control: ACCURATE Touch-Screen Year of manufacture: 2018 3 servo-driven rolls Torque per roller: 3500 Nm Electrically assisted support rolls Intelligent software: - Ellipse program - U-bend shapes - Tangent control - Automatic section detector Specifications Metric / US Standard Horizontal and vertical operation Horizontal axis diameter: Ø 105 mm Number of rolls: 3 X-axis stroke: 0 - 400 mm Dimensions (approximate): Length: 4500 mm Width: 3200 mm Height: 2700 mm Weight: 3300 kg Hsdpfxovd Dfto Adxofb Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual terms are made. We recommend verifying all important details.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. Hfsdpfofg E Hpsx Adxsb - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Leto izdelave: 2025, delovna širina: 1.250 mm, Kot upogiba (maks.): 160 °, najv. debelina jeklene pločevine: 1 mm, maks. debelina aluminijaste pločevine: 12 mm, najv. debelina bakrene pločevine: 12 mm, skupna masa: 100 kg, skupna dolžina: 1.500 mm, It is a lightweight yet robust segment folding bench with a working width of 125 cm. Direct from Prod Masz ‼️ Segment folding machine, length 1250mm Lightweight (despite high versatility) at 105 kg, 100% segmented Easy to transport Segments can be changed without the need for tools, etc. Plus several other convenient features Need reliable equipment? Have special requirements? Contact us‼️ We deliver professionally and with maximum durability. Prod Masz stands for reliability. 3-way segmented folding bench SGR-1250/1.0mm Hfodpfjcgmf Rex Adxeb Technical Data: - Max. working width: 1250mm - Max. bending angle: 160 degrees - Bending beam: 15mm - Max. sheet thickness (steel): 1.0mm, aluminium: 1.2mm - Weight: 105 kg - Segment width: 30, 40, 50, 60, 70 and 100mm - All three beams are equipped with segmented jaws (fully segmented) - Degree scale - Throat depth: 55mm Total length: 1.6m Height: 45cm Price: 3200 Euro Delivery: weekly Cash payment upon delivery Delivery cost: 180 Euro within Germany We look forward to hearing from you! Invoices are issued with 0% VAT for intra-community delivery or plus 19% VAT.

Leto izdelave: 2022, obratovalne ure: 20 h, Stanje: kot nova (razstavni stroj),

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Hodpfx Askvnumedxofb Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Sheet width: 2050 mm Sheet thickness: 3 mm Frame gap: 2100 mm Backgauge – adjustable: 600 mm Connected load: kW Machine weight approx.: 1.1 t Dimensions (L x W x H): 2.7 x 2.1 x 1.4 m The machine operates quietly and, thanks to its geared motor with brake system, is energy efficient. Hfjdpfx Aofv H Dkjdxsb Our machine is constructed as a monoblock body, welded from ST42 quality material. The machine’s blades are made from 2379 grade material, manufactured by BOHLER. These high-quality blades ensure precise cutting. Emergency stop button, foot switch, and finger protection grid are included as standard equipment. (Documentation available in English only)

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Hodpfx Adecxxx Hexsfb Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t

Stanje: novo, Fully automatic palletizing system HYDRA+ cobot palletizer: 👉 Up to 20 kg payload (optionally 25 kg) and 👉 Palletizing height up to 2 m → Robot base and control elements → Pallet frame for 2 Euro pallets → FJM vacuum gripper for packages, execution according to customer requirements → Innovative palletizing software → Palletizing system, firmware, and software with the latest updates → Customized design according to customer specifications We offer various configurations of our palletizing system depending on customer requirements. Hfodpfx Asi Emapodxob 💶 For detailed pricing information on the cobot palletizing system with a 20 kg payload, please refer to the comprehensive price package (see attached PDF-German 👉 8136716.pdf) The palletizing system includes: → Collaborative robot DOOSAN ROBOTICS Cobot H2017 for 20 kg payload, optionally upgradeable to 25 kg payload with DOOSAN ❗ For logistical reasons, delivery is only available within the DACH region and countries bordering Austria. HYDRA cobot palletizer by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH 2021

Stanje: dober (rabljeno),

Stanje: novo, High-performance thread tapping machine with leadscrew mechanism. Safety system to prevent tool breakage. Programs for single and continuous operation, programmable thread depth, piece counter, LED light, and electronically controlled motor braking for single-cycle mode. Easy leadscrew change via quick coupling. Normal drilling capacity: 15 mm Thread tapping capacity: M 3 – M 10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat depth: 250 mm Spindle/table distance: 185 to 541 mm Table surface: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Power supply: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm, 560 rpm, 1,000 rpm, 1,600 rpm Also available as a column drilling machine BS 18 GL (M00034)! Hfsdpfx Ajfrlndodxsb Digital speed display as standard. Column extended by 200 mm: 14154