Ekscentrični stiskalnici - en stolpec

SCHULER PD 63-250

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Predpjulnb Dofx Agpod Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: dober (rabljeno), Leto izdelave: 2006, 1 CNC Rohrendenumformmaschine Hersteller: BLM Modell: Tube Form M32x1,5 Prsdpen Sm Ddsfx Agpod Baujahr: 2006 Technische Daten: - Schubkraft: 3,5 t - Sperrkraft: 5 t - Arbeitshub: 130 mm - Werkzeugdurchmesser: 80 mm - Abmessungen (L x B x H): 2400 x 1400 x 2000 mm - Anschlussleistung: 12 kVA - Gewicht: 2.200 kg

Stanje: rabljeno, Leto izdelave: 1996, Spindle diameter: 60 mm X-axis travel: max. 1000 mm – min. 100 mm Y-axis travel: max. 1000 mm – min. 100 mm Drilling capacity in steel: max. 40 mm Tapping capacity: max. M24 Material thickness: max. 60 mm – min. 5 mm Spindle speeds – infinitely variable: 1 – 1,000 rpm Feed rate, infinitely adjustable, rapid traverse: 1 – mm/min Pjdpfegvkkzox Agpjrd Feed rate, infinitely adjustable, working feed: mm/min Feed force: 16 kN Tool holder: SK 40 Spindle stroke: 600 mm Positioning speed in all axes: 1 – 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Table load capacity: max. 500 kg Working height: 1,000 mm Machine weight: approx. 4.8 t Space requirement: approx. 3.5 x 3.3 x 3.1 m Control system: Bosch CNC plate drilling machine HMB PBM1000/60 - W12 for drilling end plates and base plates in steel construction, equipped with automatic tool changer (12 positions) Number of drilling spindles: 1 Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 75 t Outreach: 300 mm Stroke: 8 – 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Through-hole in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 – 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - With hydraulic clutch-brake combination, new hydraulics and oil cooler - With gear train in oil bath - Fixed table prepared for mounting of tool change consoles - 2 roller strips in the table - Mechanical overload protection in ram (shear plate) The following works are carried out on the machine / Partial overhaul: - Machine completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine repainted Prjdpsd Nl E Uefx Agpjd - New Balluff cam switch - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication system - New control cabinet with touch panel and ABB safety control - Current UVV safety inspection with brake time measurement

Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Proizvajalec: Hamba Maschinenfabrik GmbH Tip: 2400 Leto izdelave: neznano, generalno obnovljeno pri Grunwaldu leta 1993 Zmogljivost: do 2.400 lončkov/uro (odvisno od izdelka) Steze: 1-stezna, 12-mestna Polnilni produkt: poltekoči izdelki kot so sveži sir, jogurt, smetana, ayran ipd. Polnilna prostornina: 100 - 500 ml, nastavljivo Format lončka: okrogel, 95 mm Vrsta zapiranja: alu-folija, zatesnitev Pedpfx Agjkkglaspord Priključne vrednosti: 380 V, 50 Hz, 1,7 kW Izstopni trak je vključen Opcijsko: Stroj je mogoče obnoviti

Leto izdelave: 1989, Stanje: zelo dobro (rabljeno), Article number: MA1060 Manufacturer: Fasti Model: 509/40/6 Year of manufacture: 1989 Machine No.: 5888 Control system: Omron (renewed in 2012) Length [mm]: 4850 Width [mm]: 2450 Height [mm]: 2100 Weight [kg]: 10,900 Connected load: 380V / 16.5 kW Working area [mm]: 4000 Max. sheet thickness [mm]: 6 Blade length: 4000 Length stop: front 5000 mm / rear stop 1000 mm Prodpfx Ajd Ac D Regpsd Accessories: manuals / wiring diagrams

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: 5255, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left side Adjustable stroke (min–max): 16–40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed stamping press in three-column design, equipped with air cooler, piece counter, separate control cabinet, air clutch, and BRUDERER precision double-roll feeder, left side. Prsdpfx Aecxxu Negped

Stanje: dober (rabljeno), Leto izdelave: 1977, Pressure: 250 t Clearance between uprights: 1120 mm Stroke: 250 mm Distance table/ram, max. stroke up, max. adjustment up: 500 mm Psdox Ug Dopfx Agpjrd Table size: 1100 x 900 mm Table height above floor: 950 mm Lateral upright passage: 700 mm Ram area: 1100 x 900 mm Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Weight: 25 t Space requirement (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: Equipped with electro-hydraulic drive, hydraulic (20) and electric control system according to UVV regulations, light curtain (Sick), upper and lower stroke limitation, pressure- and position-dependent control, shear-blow damping, short-stroke control, new control system (Mitsubishi), safety controller (PNOZ Multi), screen control with touch-screen, control cabinet

Stanje: dober (rabljeno), Maks. premer: 560 mm Delovna dolžina: 3550 mm Pjdpfx Ajv Dvzyjgpsrd Maks. dolžina obdelovanca: 4000 mm

Stanje: zelo dobro (rabljeno), Four-jaw chuck, make Roto Record Model DHK 315 x 4 Short taper size 8 Taper diameter 139.735 mm Bolt circle diameter 171.4 mm Diameter 315 mm Jaws individually adjustable Prodpjg Rxh Iefx Agped