Preklopni tisk - en stolpec

BERG & SCHMID HK 1700

Stanje: rabljeno, Leto izdelave: 1993, številka stroja/vozila: 931200665, Packaging System - Wrapping & Shrinking Machines BVM SM4012 K-SC4030S Year 1993 - Serial-No. 931200665 Fully automatic packaging machine SM 4012K Max. infeed width: 420 mm Shrink tunnel: SC4030S Format (width x height): 450 mm x 330 mm 5 m chain gripper infeed Discharge conveyor Duedpeh Ax Hfofx Ai Uju GUK feeder for single sheets Online video inspection via Skype video We look forward to your visit – more machines available in stock Available immediately – machine can be inspected Located in Emskirchen / Nuremberg – test runs possible

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Dsdpfx Aiofv Awas Ujuu Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Stanje: novo, Pressure: 17.0 kN Stroke: 40 mm Throat depth: 110 mm Working height (min–max): 70–220 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Machine weight approx.: 60 kg Dimensions (L x W x H): 310 x 190 mm Toggle-lever pneumatic presses Duedjfv Avvopfx Ai Usu Including fine adjustment of working height via bevel gear and side crank — convenient and easy to set. Toggle-lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: SO126, Used HDPE extrusion blow molding system for 10 L – approx. 300 bph – Overview Used Uniloy Milacron HSM10/D extrusion blow molding machine designed for the production of HDPE containers up to 10 L. Featuring a single-parison head and robust clamping unit, this EBM unit is ideal for industrial packaging and beverage manufacturing auxiliary facilities (e.g., water cans, edible oils) and can be integrated into a used filling line. Documentation and operating manuals are available. Reference number: SO126. Technical specifications & performance data Dusdpfsyhbt Hsx Ai Ueu Key data Manufacturer/model: Uniloy Milacron HSM10/D Year of manufacture: 2000 Technology: Extrusion blow molding (EBM), single parison Material: HDPE Number of cavities: 1 Max. container volume: 10 L Indicative output: up to approx. 300 bph at 10 L (application dependent) Operating manuals: included Reference number: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing output (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; cylinder heating power: 31.4 kW Motor cooling power: 0.58 kW; cylinder cooling power: 1 kW Parison head Type: PE 1/200, single parison Max. die head diameter: 200 mm Head heating power: 14.2 kW Parison wall thickness control: hydraulic (wall thickness programming) Clamping & blowing unit Clamping force: 200 kN Max. mold size: 650 × 500 mm (H) Mold thickness: 2 × 150 mm Mold opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption approx. 104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Oil tank capacity: 400 l Pump flow rate (1470 rpm): 123 l/min Maximum pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooler motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air demand: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air demand: 1000–1500 Nl/min Cooling water Mold circuit: 8–12 °C; flow rate 15 m³/h Extruder & hydraulic oil cooling: 10–24 °C; flow rate 4 m³/h Dimensions & weights Approx. machine dimensions (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; extrusion group weight: 6400 kg Noise level at operator position: < 85 dB(A) Advanced automation & control systems Hydraulic wall thickness programming for precise parison control, improving weight distribution and top load for 10 L containers. Proprietary Uniloy command and control software (version code available in manuals) with HMI for setpoint management and diagnostics. Integrated temperature control via six extruder zones and heated die head for stable processing at up to 300 °C transformation temperature. Interlocked safety guards and emergency-stop switches for safe operation. Capabilities for integration into the production line

Stanje: rabljeno, Pressure: 200 t Column spacing: 1600 mm Maximum ram stroke: 600 mm Installation height: 900 mm Table width: 1600 mm Table depth: 1300 mm Table height: 1060 mm Ram surface: 1600 x 1300 mm T-slots: DIN 650 / 22H12 Rapid traverse: 400 mm/s Return speed: 325 mm/s Pressing speed: 42 mm/s at 40% Pressing speed: 20 mm/s at 100% Blankholder force: 800 kN Blankholder stroke: 150 mm Blankholder speed up: 68 mm/s / down: 225 mm/s Year of retrofit: 2001 Djdpfxog S R Twj Ai Ueuu

Stanje: novo, Pressure 1.5 kN Dusdpfx Ajfv Av Dei Uju Stroke 40 mm Throat Depth 70 mm Working Height from/to 75 - 170 mm Table Surface 115 x 70 mm Machine Weight approx. 11 kg Dimensions (L x W x H) 115 x 175 x 290 mm Rack and Pinion Hand Presses HZ 150 The force is transmitted via a rack-and-pinion mechanism. These presses are used where a constant pressure is required during the operation. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressing performance, T-slot machined centrally according to DIN 650, T-slot nuts fit precisely.

Stanje: novo, Pressure: 2.5 kN Stroke: 45 mm Throat depth: 90 mm Working height (min.–max.): 80–220 mm Table size: 120 x 60 mm Machine weight: approx. 22 kg Dimensions (L x W x H): 160 x 230 x 390 mm Rack and Pinion Hand Press HZ 250 The force is transmitted via a rack and pinion system. It is used wherever constant pressure is required throughout the working process. Dujdefv Av Iepfx Ai Ueu Precisely manufactured; spindle hardened and ground; unlimited service life. Long spindle guide, optimal pressing force. T-slot according to DIN 650, milled centrally, T-slot nuts fit precisely.

Stanje: novo, Pressure: 34.0 kN Stroke: 40 mm Throat depth: 130 mm Working height (min. – max.): 80 – 240 mm Table size: 190 x 140 mm Spindle diameter: 30 mm Dujdpfx Aijfv Avye Ueu Machine weight: approx. 80 kg Dimensions (L x W x H): 375 x 200 mm Toggle lever pneumatic presses Including fine adjustment of the working height via bevel gear with side-mounted handwheel, comfortable and easy to set. Toggle lever pneumatic presses are used when maximum pressing force is required just before the end of the stroke, e.g. for assembly, punching, embossing, riveting, etc.

Stanje: rabljeno, Leto izdelave: 1981, Technical details: X-travel: 400 mm y-travel: 420 mm z-travel: 380 mm Table size: 710 x 400 mm Max. table load: 120 kg Spindle speed range: 45 - 2240 / 18 steps rpm Infinitely variable feed: 6.3 - 600 / 2 stepless mm/min Quill stroke vertical: 100 mm Quill stroke horizontal: 100 mm Spindle taper vertical/horizontal: SK 40/SK 40 Spindle head swivels left and right: 90° Distance table/horizontal spindle: min./max.: 200 / 325 mm Distance table/vertical head: min./max.: 150 / 730 mm Total power requirement: 5.5 kW Machine weight approx.: 1,950 kg Djdpju Nc Hkjfx Ai Ujuu Machine dimensions LxWxH: 1.7 x 1.4 x 1.9 m Control cabinet dimensions: 850 x 500 x 1500 mm Incl. machine feet and operating manual

Stanje: rabljeno, Leto izdelave: 1998, Dolžina struženja 322 mm Največji premer vrtenja nad ležišči 510 mm Dodsx N A N Hspfx Ai Usuu Največji premer struženja 279 mm Vrtljaji vretena 60–6000 min⁻¹ Vretenina izvrtina 53 mm Revolver z 12 postajami Krmiljenje: Fanuc 21 T Opremljen z: Podajalnik palic Hatec Rapid Load 12 Konjiček Razni nosilci orodij in vpenjalne klešče Samocentrirna glava