Amtec Vacuf 50-200 nakup rabljenega (48.484)

Stanje: novo, Leto izdelave: 2025, Vacuum conveyor with electric vacuum pump. – Specifications: Capacity: 50–200 kg/h (with a maximum conveying distance of 5 m); housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 15 l/min; power supply: 220 V; power consumption: 1.5 kW. Nodpfx Anov Nni Tjpjwn Please note that our new machine prices are often lower than the typical prices for used equipment. Feel free to contact us and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vacuum conveyor with electric vacuum pump. - Specifications: Capacity: 200–600 kg/h (with a maximum conveying distance of 5 m); Housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 15 l/min; power supply: 220 V; power consumption: 2.2 kW. Please note that our new prices are frequently below typical used equipment prices. Simply enquire and tell us your specific packaging application. – We generally always have 30–50 different new machines available from stock for immediate delivery. For machines manufactured to customer specification, we offer very short lead times starting from around 3 weeks. – All machines are supplied with a full warranty. Nwsdpfx Asv Nnkdsnpjn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 38.500 h, 1,0 rabljena brizgalna naprava Proizvajalec: ENGEL Tip: VICTORY 200/50 TECH Letnik: 2007 Zaključna sila: 50 ton Nwsdpjz Nxilefx Anpon Razdalja med stebri: BREZ STEBROV Premer vijačnega valja: 30 mm Teža brizganega izdelka: 70 g/ciklus Krmilni sistem: CC200 Oprema: - 1 x hidravlični sistem za premikanje jedra

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, vpenjalna sila: 500 kN, premer vijaka: 22 mm, razmak između stupova: 355 mm, skupna masa: 2.700 kg, Zapiralna sila: 50 t Leto izdelave: 2006 Vbrizgalna enota .../200 Premer polža: 22 mm Specifični tlak vbrizga: 2800 bar Prostornina vbrizga: 41,8 ccm Sistem zapiranja orodja 50/... Zapiralna sila: 50 t Mere orodnih plošč: 520 x 520 mm Razmik med vodili: 355 x 355 mm Višina orodja: 210 mm Hod odpiranja: 400 mm Maksimalna razdalja med ploščama: 610 mm Teža: 2700 kg Dimenzije (m) d x š x v: 3,8 x 1,1 x 2,1 m Nwodpfxezt Ih Tj Anpen Krmiljenje: NC4

Leto izdelave: 2025, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 54942, Brez minimalne cene – zagotovljena prodaja po najvišji ponudbi! EXW – razstavljanje in natovarjanje mora organizirati kupec! TEHNIČNE PODROBNOSTI Nazivna preizkusna sila: 50 kN Preizkusni hod: < 1.400 mm Uporabna razdalja med pritiskalnimi ploščami: približno 800 mm Širina preizkusnega prostora: 500 mm Preizkusna hitrost: brezstopenjsko 0,001–1.200 mm/min Ločljivost merjenja poti: ≤ 0,001 mm Premer pritiskalnih plošč: 246 mm Osrednja vrtina: 40 mm Navoj: M12 Trdota: ≥ 56 HRC Izvedba: jeklo, kaljeno, z vrtljivo zgornjo in spodnjo stranjo, z možnostjo fiksacije pri 0° Merilno območje krožnice oboda: 30–250 mm Izvedba: tipalo z ležaji Meritev: zaznavanje pod obremenitvijo PODROBNOSTI O STROJU Krmiljenje: krmilni sistem z računalnikom Preizkusni program: merjenje krožnice oboda Omrežje: Fast Ethernet, 100 Mbit/s med računalnikom in ločeno potrebnim upravljalnim računalnikom Dobava programske opreme: USB-ključ z programsko opremo za namestitev Dokumentacija: različica in licenčni status nista posebej dokumentirana Zadnja kalibracija: 04.08.2025 Dimenzije in teža Dimenzije stroja: približno 750 × 900 × 1.950 mm Dimenzije podstavka: približno 730 × 900 × 700 mm Dimenzije omarice z računalnikom: približno 600 × 600 × 1.900 mm Teža stroja: približno 490 kg Teža podstavka: približno 50 kg Napetost: 3 × 400 V AC, 50 Hz, N + PE Nazivna moč: 3.000 W Priključna moč: približno 3 kVA Nedoz Tf D Ropfx Anpown OPREMA Podstavek Omara z računalnikom Vrtljive pritiskalne plošče Merilna naprava za krožnico oboda s tipali in ležaji USB-ključ z programsko opremo za namestitev Priključek za stisnjen zrak: pnevmatski priključek z zapornim ventilom Opomba: Delovanje je bilo preverjeno in potrjeno. Sedanjo nerešeno sporočilo o napaki na pogonu pa preprečuje nadaljnjo uporabo. Stroj je vizualno kot nov. Upravljalni računalnik ni vključen v ponudbo.

Stanje: novo, Leto izdelave: 2025, Metal detector for food and other products (such as pharmaceutical, chemical, and textile goods), also suitable for moist products. Features include a stainless steel frame, touchscreen interface, and easy integration into existing production lines. Specifications: - Detection speed: 0.5 m/sec - Detection accuracy: FE from Ø 1.5 mm, SUS from Ø 2.5 mm - Tunnel dimensions (W x H): 450 x 250 mm - Max. product size (W x H): 410 x 210 mm - Max. product weight: 50 kg - Power supply: 220V/0.45kW, 50Hz/60Hz - Dimensions & weight: L1800 x W800 x H950 mm, 180/280 kg Nwjdpfx Anov Nm Hkjpjn Please note that our new machine prices are often below typical used equipment prices. Simply inquire and let us know your packaging requirements. Usually, 30–50 different new machines are immediately available from stock. For custom-built machines, we offer very short lead times from approximately 3 weeks. All machines are supplied with a full warranty.

Leto izdelave: 2025, stanje: novo, Vacuum conveyor with electric vacuum pump. - Specifications: Capacity: 1,500-1,800 kg/h (with a maximum conveying distance of 5 m); Housing: stainless steel 304; Required compressed air: 0.6 MPa; Air consumption: approx. 60 L/min; Power supply: 220 V; Power consumption: 5.5 kW. Nwedev Nnkwepfx Anpon Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us with your packaging application requirements. - We generally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer very short lead times starting from approximately 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vacuum conveyor with electric vacuum pump. – Specifications: Capacity: 1,500–2,500 kg/h (at a maximum conveying distance of 5 m); Housing: Stainless steel 304; Required compressed air: 0.6 MPa; Air consumption: approx. 60 L/min; Power supply: 220V; Power consumption: 7.5 kW. Njdpfx Anov Nnk Dopswn Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. – We typically have 30 to 50 different new machines available immediately from stock. For custom-made machines, we offer very short delivery times starting at approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vacuum conveyor with electric vacuum pump. - Specifications: Capacity: 1,000–1,500 kg/h (at max. 5 m conveying distance); Housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 30 L/min; power supply: 220 V; power consumption: 5.5 kW. Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and tell us about your packaging requirements. - We usually have 30–50 different new machines available from stock for immediate delivery. For machines custom-manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. - All machines are available with a full warranty. Nsdev Nnkqspfx Anpswn

Stanje: rabljeno, Leto izdelave: 2003, Natezna sila: 200 t Nwedpsz D U Ixsfx Anpjn Tip: Horizontalni Pogon: Hidravlični

Leto izdelave: 2000, stanje: rabljeno, Punching machine Njdsg Dgyxspfx Anpswn Edel HM 35/350 BKE 200/5 Maximum pressure: 35 t Sheet thickness: 5 mm at 40 kp/mm²

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rezkalni motor 50 kW ploščati motor Nwedpfsm Sgvzjx Anpen Samodejni rezkalnik za kliničaste spoje za avtomat za rezkanje kliničastih spojev dimter HK200 dimter HK250 dimter HK400 Različne dolžine vretena Na slikah je prikazan obnovljen rezkalni in lepilni stroj dimter HK400 podjetja jöma, kladivasto zelena barva 2K Podajalni pogon s servomotorjem Kabli in zračne napeljave so nameščeni zgoraj nad rezkalnim strojem

Stanje: zelo dobro (rabljeno), Na prodaj industrijska centrifugalna črpalka KSB ETABLOC-GN 50-200/1502.21, opremljena z električnim motorjem KSB z močjo 15 kW. Črpalka je namenjena za industrijske aplikacije, tehnološke naprave, kroženje vode in druga ustrezna medija. Tehnični podatki črpalke: Proizvajalec: KSB Aktiengesellschaft Nsdpjz Sn Suofx Anpewn Tip: ETABLOC-GN 50-200/1502.21 Identifikacijska številka: 48861841 Pretok Q: 12–100 m³/h Višina dviga H: 55–34,5 m Število vrtljajev: 2900 vrt/min Priključki: prirobnični Podatki motorja: Proizvajalec: KSB Tip: QUPA 160 M2B-6 Moč: 15 kW / 50 Hz Napetost: 380–660–420 V Tok: 27,8–16,1–25,2 A cos φ: 0,93 Stopnja zaščite: IP55 Razred izolacije: F Masa motorja: pribl. 87 kg Stanje: rabljena, normalne sledi uporabe in skladiščenja, vidne na fotografijah. Prodaja se kompleten sklop črpalke + električni motor, natančno v stanju, kot je prikazano na fotografijah.

Stanje: zelo dobro (rabljeno), Na prodaj je centrifugalna črpalka Pumpen Distel, tip 50/200, opremljena z električnim motorjem 11 kW, proizvajalca Antriebstechnik G. Bauknecht AG. Črpalka je rabljena in deluje. Vizualno je v dobrem stanju, ima normalne znake uporabe in skladiščenja. Dejanski in popolni stanju sta prikazana na slikah. Tehnični podatki črpalke: Proizvajalec: Pumpen Distel Tip: 50/200 Št.: 78756 Pretok Q: 40 m³/h Tlak: 4,5 bar Število vrtljajev: 2900 vrt/min Moč: 11 kW Priključki: prirobnični Tehnični podatki električnega motorja: Proizvajalec: Antriebstechnik G. Bauknecht AG Tip: RF 11/2-75 Moč: 11 kW Napetost: 380 V Tok: 22 A Frekvenca: 50 Hz Njdpfez Sn Sbjx Anpewn Število vrtljajev: 2930 vrt/min cos φ: 0,88 Stopnja zaščite: IP54 Razred izolacije: B Način delovanja: S1 Montažna oblika: B3/B5 Stanje: Rabljena, delujoča. Ima normalne znake uporabe in skladiščenja. Obseg prodaje: Popolna centrifugalna črpalka z električnim motorjem 11 kW – natančno v stanju, kot je prikazano na slikah.

Stanje: novo, Leto izdelave: 2025, Flow wrapper for high-speed packaging of small products in longitudinally sealed flow packs. The flow pack packaging machine is suitable for packing single or multiple, dry, uniform, or irregularly shaped products. A special feeding system is installed upstream of the flow wrapper. Sorting and feeding of products in-line to the carriers (flow wrapper infeed table) is handled by the six servo-driven side conveyor belts. This eliminates the need for manual single product loading, offering a significant production advantage and contributing to the overall efficiency of the flow wrapper. AMTEC’s flow pack packaging machine features rotary knives perfectly matched in diameter to the bag length, resulting in optimized processing speed. Nedpfov Nli Dsx Anpewn – Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30) mm; Bag dimensions: L (70-200) x W (15-60) x H (5-30) mm; Number of rotary knives: 2; Max. machine cycle rate (no load): 400 cycles/minute; Film types: BOPP/OPP (clear, printed, or laminated); Power supply: 380V, 9.5kW; Machine dimensions: L9734 x W1110 x H1924 mm; Weight: 3500kg. Please note that our new prices are often below typical used equipment prices. Feel free to send us an inquiry with details about your packaging requirements. Usually, 30–50 different new machines are available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from around 3 weeks. All machines are supplied with a full warranty.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, številka stroja/vozila: 20307, Funkcionalnost: popolnoma funkcionalen, moč: 108 kW (146,84 KM), vhodna napetost: 400 V, vhodni tok: 270 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 1.120 °C, notranja dolžina: 3.000 mm, notranja širina: 450 mm, notranja višina: 200 mm, skupna dolžina: 16.800 mm, skupna širina: 1.726 mm, skupna višina: 2.398 mm, Število komor: 1, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, vrsta goriva: električni, Oprema: dokumentacija / priročnik, Tečajni peč z transportnim trakom podjetja Mahler. Pri nas je bil ta peč uporabljen za žarjenje delov iz nerjavečega jekla v vodikovi atmosferi. Nadzorni sistem je bil že posodobljen, redno pa so izvajali tudi potrebna vzdrževalna in popravljalna dela. Ogled je možen po dogovoru. Nsdpe Af Imasfx Anpewn Razstavljanje in odvoz izvede kupec v skladu z veljavnimi varnostnimi in okoljskimi predpisi.

Stanje: dober (rabljeno), Ponujam industrijsko vertikalno črpalko priznanega nemškega proizvajalca ALLWEILER GmbH – model NLT 50-200. Njdpfxsz Sl Etj Anpown Črpalka je namenjena za neprekinjeno obratovanje v industrijskih, vodnih in tehnoloških sistemih. Oprema je popolna z električnim motorjem. Rabljeno stanje – vidni sledovi skladiščenja in rahla površinska korozija. ⚙️ Tehnični podatki proizvajalec: ALLWEILER (Nemčija) tip: NLT 50-200 leto izdelave: 2014 zmogljivost: 75 m³/h črpalna višina: 48 m število vrtljajev: 2900 obr/min moč motorja: 11,6 kW napajanje: 400V (50 Hz) 460V (60 Hz) premer priključka: pribl. 65 mm izvedba: vertikalna (vertical inline pump) ✅ Tehnično stanje črpalka kompletna z motorjem ni vidnih mehanskih poškodb prosto se vrti vizualno stanje kot na slikah (sledovi skladiščenja, površinska rja)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler model MG 50 T.V.E. 1200x1100x3500h for the compaction and formation of bales of soft waste materials, such as glass wool mats or similar. The MG 50 T.E. model features a fully enclosed compaction chamber; both the material loading door and bale extraction door can be opened. The electrical control panel is mounted on the side with integrated controls and comes with a 10 m extension cable, allowing it to be positioned away from the baler. The press plate is operated by a single cylinder with a 2700 mm stroke and is guided by 4 lateral sliding rails. Material is loaded from the front. The compaction cycle (downward and upward movement of the press) is automatic, operated by push button. - For transport, the machine is constructed in three sections: one of 2000 mm height, one around 2300 mm, and the cylinder, which will be assembled onsite. - Bale tying is preset-type, performed with the doors open, and is done manually; tying can be done with standard pre-cut wire or strapping through slots at the rear of the chamber. - Bale extraction is carried out using a forklift; dedicated channels at the base allow the forklift tines to be inserted. - The bale extraction door is closed via a handwheel, ensuring safe opening even with highly elastic materials; a microswitch ensures the door is securely closed before pressing. The upper door is equipped with a hydraulic lever closure with controls on the machine. - Can be installed against a wall; requires front access only for material loading and bale extraction. - The hydraulic circuit features a safety lock valve to prevent press plate descent. - The machine must be fixed to the ground and is positioned over a wash liquid collection tray. • Manufacturer / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Material pressing pressure: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: 1250 x 1150 mm, variable height (min 800, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Pressing chamber: 1200 x 1100 x 3500 mm • Loading opening: 1200 x 1800 mm • Ram stroke: 2700 mm, single extension • Operation: Automatic, push button • Cycle time (automatic): 130 seconds Njdpfxoyzr Nmo Anpown • Manual ties: 5 • Bale ejection: Removed with forklift • Hydraulic unit: Integrated in press • Motor power: 10 Hp (7.5 kW) • Supply voltage: 380V, 50 Hz • Overall dimensions: 2000 x 3500 x 7150 mm • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used vertical hydraulic baler, in excellent condition, sold as seen and approved.

Stanje: rabljeno, številka stroja/vozila: 1 284 066, Chuck diameter: 200 mm Through hole: 50 mm Mount, short taper according to DIN 55027: Size 6 Njdpfx Anecm Tgkspewn External diameter of clamping cylinder: 290 mm Overall height (clamping cylinder to front of chuck without jaws): 150 mm Pneumatically actuated

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Robot ABB Robotics IRB6650 Foundry 200/2.75 S4C+ M2000, Profibus Krmilnik: S4C+ M2000 Število osi: 6 Maksimalna nosilnost: 200 kg Maksimalni delovni obseg: 2750 mm Leto izdelave: 2003 Obseg dobave: Robot, krmilnik, kabli, učna plošča, električni diagrami, diskovna enota za varnostno kopiranje podatkov. Rabljen artikel – prisotne so običajne sledi uporabe. Dodatne podrobnosti, številke artiklov in slike so na voljo na zahtevo. Dve tedna garancije za preizkusno delovanje. Brez dodatnih garancij. Poleg tega so nadomestni deli stalno na voljo v skladišču. Robot je popolnoma funkcionalen in ga lahko po želji pregledate. Brezplačno nakladanje / dostava iz tovarne. Nsdpoz Rk S Ijfx Anpown Navedeni znesek je neto. Zakonodajno predpisana stopnja DDV (19 %) bo dodana ob zaključku naročila. Prejeli boste ustrezni račun z izkazanim DDV. Osebna prevzema na lokaciji 74722 Buchen/Hainstadt. Stroški pošiljanja ali transporta se razlikujejo glede na količino, težo in želene pogoje dostave. Stroški pošiljanja v tujino so na voljo na zahtevo – prosimo, navedite državo, kraj in poštno številko. Stroški transporta so na voljo na zahtevo – prosimo, navedite naslov za dostavo.

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag ergotech sys 50-200 (1992) Nodjyyztfopfx Anpjwn

Leto izdelave: 2025, stanje: novo, Complete version of the vertical packaging system with volumetric dosing unit, 1 cup, single-vessel conveyor, and discharge conveyor belt. Suitable for packing granular products such as sugar, rice, nuts, etc. The vertical packaging machine (VFFS) is equipped with the following components: PLC (touchscreen operation monitor, available in various languages, such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, dual transport function possible, air separation/extraction device (removes air from the bag before sealing—no vacuum is created), holding device for heavy finished bags, Euro hole punching device, suitable for OPP and PE film (PE unit may incur additional charge). – Specifications of the VFFS packaging machine: filling range: 150–1,200 ml; film width: max. 420 mm; bag size min–max: L(60–300)xW(60–200) mm; maximum machine cycle rate (idle): 50 cycles/minute; stainless steel 30; 220V, 2.2 kW; 6 bar, 0.3 m³/min; machine dimensions: LxWxH: approx. 1080x1300x1400 mm; weight: 500 kg. The dosing unit's cup has a filling capacity of up to 50 l. The single-vessel conveyor also has a filling capacity of up to 50 l. The container is manually filled in the lower position and automatically emptied in the upper position (complete cycle: 1 minute). – Specifications: height: 3–5 m; machine dimensions: L1400xW700xH3500 mm; 220 V/1 kW. Variations possible. The discharge conveyor belt has a stainless steel frame. – Specifications: conveyor speed: 30 m/min; 220V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Dimensions of the complete system: approx. L1080xW4550xH3500 mm, depending on final configuration. The system must always be customized to customer/product-specific requirements, which may result in specific deviations for modules and machines from the specifications provided. Key components: colored SIEMENS touchscreen display, SIEMENS PLC controller, SIEMENS servo motor, AIRTAC cylinder, AIRTAC solenoid valve, OMRON relay, SIEMENS servo motor for film transport. Nwedjv Nmi Sjpfx Anpon The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below usual used prices. Please feel free to contact us and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Complete dosing and packaging system for liquids, including tank, pump, and discharge conveyor belt. Suitable for both viscous and non-viscous liquids such as creams, toothpaste, body lotion, shampoo, mayonnaise, ketchup, honey, jam, edible oil, vinegar, juice, milk, etc. The vertical form fill seal machine (VFFS) is equipped with the following components: PLC (touchscreen operating monitor, available in various languages, e.g. English, German, etc.), date printer, automatic program setup, registration sensor, quick-change forming set, pneumatic sealing unit, servomotor-driven film transport (double transport possible), air separation/removal device (removes air from the bag before sealing—does not generate a vacuum), holder for heavy finished bags, Euro slot punching unit, suitable for OPP and PE film (PE unit possibly at extra cost). — VFFS machine specifications: Filling volume: 150–1200ml; Max. film width: 420mm; Bag size min–max: L(60–300)xW(60–200)mm; Max. machine cycle rate (idle): 50 cycles/min; Stainless steel 304; 220V, 2.2kW; 6 bar, 0.3m³/min; Machine dimensions (LxWxH): approx. 1080x1300x1400mm; Weight: 500kg. — Tank and pump specifications: Tank capacity approx. 50L (customization available); Height: approx. 70mm; Pump available in various versions, e.g. 10–150ml, 150–500ml, 500ml–1L, 1L–2L, 2L–5L, etc. The pump system will be adapted to the customer’s product based on sample submission. Specifications and product feeding may vary accordingly (surcharges may apply). The discharge conveyor has a stainless steel frame. — Conveyor specifications: Conveyor speed: 30m/min; 220V, 0.55kW; Dimensions (LxWxH): approx. 1850x550x1230mm; Weight: 80kg. — Complete system dimensions: approx. L1780xW1850xH1470mm, depending on final configuration. The system must generally be tailored to customer/product requirements, so specifications may vary between modules and machines. Key components: Siemens color touchscreen display, Siemens PLC controller, Siemens servomotor, Airtac cylinders, Airtac solenoid valve, Omron relays, Siemens servomotor for film transport. Nwjdpfjv Nmk Nox Anpon The machine/system is also available in alternative versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used prices. Feel free to contact us and share your packaging requirements. — We typically have 30–50 different new machines immediately available from stock. For customized machines, we offer very short delivery times from approx. 3 weeks. — All machines are sold with a full warranty.

Leto izdelave: 2025, stanje: novo, Vertical filling machine for packaging liquids into 3-side sealed or flat pouches. Includes liquid dosing unit (for high-viscosity liquids). Twin filling module for high capacities, can be connected to a CIP system for automatic circulation, ensuring clean supply lines. The packaging material is sterilized with UV light within the machine to provide a hygienic environment for both packaging material and liquid product. This reduces the risk of product contamination during packaging and increases shelf life. – Specifications: max. idle machine cycle rate: 100 cycles/minute; suitable for volumes from 200–1000ml; accuracy: +/- 1.5%; max. film width: 320mm; pouch width: 100–160mm (depending on pouch type); pouch length: 95–165mm; compressed air: 0.7m³ 6bar; 380V, 3.9kW; machine dimensions: 1700x1100x2950mm; weight: 720kg. Njdov Nmznopfx Anpjwn The machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new prices often undercut common used equipment prices. Feel free to inquire and let us know your packaging requirements. – Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times from approximately 3 weeks. – All machines are supplied with a full warranty.

Leto izdelave: 2025, stanje: novo, Complete version of the vertical packaging system with 10-head multihead weigher (1.3 l/head), Z-shaped conveyor, platform, discharge conveyor belt, and collection table for finished, packaged products. Suitable for packaging irregular-shaped bulk goods such as potato chips, cornflakes, cookies, nuts, candy, shrimp, or industrial components and products such as screws, nails, metal or plastic parts. The vertical form-fill-seal (VFFS) packaging machine is equipped with the following components: PLC (touchscreen operating monitor, available in multiple languages such as English, German, etc.), date printer, automatic program setup, registration mark sensor, quick-change forming set, pneumatic sealing unit, servo motor for film transport, double transport option, air extraction device (removes air from the bag before sealing – does not create a vacuum), support device for heavy finished bags, Euro hole punch, suitable for OPP and PE film (PE sealing unit available at additional cost if required). - Specifications of the VFFS packaging machine: Filling range: 150-1200 ml; film width: max. 420 mm; bag size min-max: L(60-300)xW(60-200) mm; max. idle cycle rate: 50 cycles/minute; stainless steel 304; 220V, 2.2 kW; 6 bar, 0.3 m³/min; machine dimensions LxWxH: approx. 1080x1300x1400 mm; weight: 500 kg. Njdpfxjv Nmirs Anpewn The weighing unit, with its 10 weighing heads (1.3 l/head), offers high weighing accuracy. Also equipped with a PLC, operation via touchscreen (available in multiple languages), 99 programs can be preset or saved, the servo motor (hopper) can be adjusted for different product types. - Specifications: Hopper capacity: 1.3 l; weighing range: 10~1000 g; accuracy: ±0.3~1.5 g (depending on product); max. idle cycle rate: 60 cycles/min; stainless steel 304; 220V, 1.5 kW; dimensions of weighing unit LxWxH: approx. 1436x1086x1258 mm; weight: 400 kg. - Specifications Z-conveyor (for feeding material to the weighing unit): Dimensions can be customized (standard height 3.6 m); conveying capacity: 3-6 m³/h; 380V, 0.75 kW; gross weight: 500 kg. The discharge conveyor features a stainless steel frame. - Specifications: conveying speed: 30 m/min; 220V, 0.55 kW; dimensions LxWxH: approx. 1850x550x1230 mm; weight: 80 kg. Rotating collection table for collecting the finished bags from the discharge conveyor. Speed is adjustable. Table diameter: 1200 mm (standard); stainless steel 304; 220V, 0.37 kW. Stainless steel platform, necessary for access to the weighing unit and upper part of the packaging machine, dimensions LxWxH: approx. 2x2x2 m. Dimensions of the complete system: approx. L3200xW3200xH3600 mm, depending on final configuration. The system must be adapted to customer- and product-specific requirements, so deviations in the specified dimensions and components may occur based on module and machine versions. Key components: Color touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in further configurations for various packing sizes and speeds.