Rezkalni motor dimter HK200 HK400

PERSKE 50 kW / HK 200 / HK 400

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 37.000 h, številka stroja/vozila: 1651, doseg roke: 15.200 mm, nosilnost: 1.900 kg, širina gosenic: 3.000 mm, Oprema: kabina, žerjav, Year of manufacture: 2002 Machine number: 1651 Track width, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.0 m Redpfxev Hwk Uj Ag Top Grab: included Crane position: behind the cab Cab side: center !! Sale on behalf of customer !!

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Rodpfx Asw Sy T Hjg Tep Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: Rodpfx Agst R T Hcj Tep 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 288, Odluščevalnik z dovodnim trakom, za največji premer hloda do 460 mm ali 600 mm, hitrost do 100 m/min, reducirni rotor in odluščevalni rotor. Odluščevalni rotor z odprtino 620 mm je NOVO IZDELAN, z garancijsko dobo. Vključuje napravo za menjavo reducirnega rotorja. Na spodnjih fotografijah je stroj v trenutnem stanju – demontiran. Dobavni rok je 3 mesece od naročila. Redjtk N Dkspfx Ag Tjp

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine used, good condition, low hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 Rsdpfx Ajvwfqqog Tjp CE type-tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, without guarantee or warranty

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 250 mm, delovna širina: 410 mm, skupna masa: 5.500 kg, Skobeljni stroj REX TIMBERWORK 410x250 mm + 4x posneti robovi + žagin vreteno Rodpfjwmm Aljx Ag Tep Leto izdelave: 1998 Lokacija: Francija, Savoja

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen,

Stanje: skoraj kot novo (rabljeno), Min. input length: 500 mm, max. 6 m. Cross-section: max. 140 x 250 mm Rsder A Et Tjpfx Ag Tjp Motor: 5.5 kW Saw stroke: servo swing arm Feed via rollers, 6 top, 6 bottom CNC control Maxi 8.0 1 x sorting unit, each 11.5 m Machine will be configured according to your requirements.

Stanje: pripravljen za uporabo (rabljen), Einlauf für Rundholz mit Wurzelreduzierer und Entrindungsmaschine. Rjdpfetrd Hfjx Ag Tsp Folgende Komponenten sind enthalten: - Rundholz-Zuführtisch mit Vereinzelung und Sortierstation (Rundholzentschäler und Rundholzeinzugsförderer) - Wurzelreduzierer Typ Bruks RR1000 - Entrindungsmaschine Typ Cambio 70-66 - Auslauf-Förderband für Rundholz mit Holzabstoßer

Leto izdelave: 2005, Stanje: rabljeno, HIT mechanisation for KVH and glulam production For components up to 600 mm wide, 300 mm high, and 18 m long Consisting of various components, available individually or as a complete system: - Layer cross pusher - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors Rodpfx Aepiurmsg Tsp - 5 lifting tables, each with 2 cross conveyors mounted on transfer carts - Stacking machine - Control cabinets - Roller tracks - Travelling timber crosscut saw with waste disposal system