Rss Recycling Shredders & Solutions 800 Serie Maalmolen nakup rabljenega (19.091)

Leto izdelave: 2024, stanje: novo, Air Separators ZIGZAG Application Description: The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. Tjdpfx Asua D Aljltoa ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Wirbelstromabscheider der Magnetic-Serie werden hauptsächlich in der Abfallrecyclingindustrie eingesetzt. Der Einsatz von Wirbelströmen ermöglicht die Rückgewinnung von Nichteisenmetallen (nicht magnetisch) aus losem Abfall, wie Aluminium, Kupfer, Messing usw. Die WPS-Abscheider zeichnen sich durch eine hohe Abscheidegenauigkeit aus, dank der eigenen Lösungen von ZŁOMIARZE, was eine hohe Rentabilität des Abfallrecyclings garantiert. WPS-Abscheider werden eingesetzt zur Rückgewinnung von: - Nichteisenmetallen aus dem Recycling von Elektronikschrott - Nichteisenmetallen aus dem Kfz-Recycling - Metallen aus Gießereiabfällen - Aluminium in Glasrecyclingprozessen - Nichteisenmetallen aus Stahlabfällen - Nichteisenmetallen aus Siedlungsabfällen Tsdpsu Dg Uhefx Altsa Funktionsbeschreibung: Das vom Schwingförderer zugeführte Material gelangt auf das Förderband des Wirbelstromabscheiders. Das Förderband befördert das Material zum Hochgeschwindigkeits-Magnetrotor. Der Magnetrotor erzeugt ein hochfrequentes Magnetfeld durch ein optimiertes System alternierender Magnetfelder. Das variable Magnetfeld induziert Wirbelströme in Metallen. Diese erzeugen entgegengesetzte Magnetfelder und führen dazu, dass Buntmetalle aus dem Materialstrom herausgeschleudert werden. Ein am Ende des Abscheiders montierter Trenner sorgt für die Fraktionierung des Materials. Der zentrale Magnetrotor wurde so konstruiert, dass er auch kleinste Materialien bewältigt und ermöglicht die Rückgewinnung von Partikeln bis zu einer Größe von 1 mm. Wir bieten auch größere Ausführungen von Wirbelstromabscheidern an – Katalog in den Dokumenten.

Leto izdelave: 2024, stanje: novo, WPS Eddy Current Separator for Non-Ferrous Metals – MAGNETIC Series MAGNETIC series eddy current separators are primarily used in the waste recycling industry. Their use of the eddy current effect allows for the recovery of non-ferrous (non-magnetic) metals, such as aluminum, copper, brass, etc., from bulk waste material. WPS separators feature high separation precision thanks to proprietary solutions developed by ZŁOMIARZE, ensuring high recycling profitability. WPS separators are used in the recovery of: • Non-ferrous metals from electronic waste recycling • Non-ferrous metals from automotive recycling • Metals from foundry waste • Aluminum in glass recycling processes • Non-ferrous metals from metallurgical waste • Non-ferrous metals from municipal waste Todsiqxtbepfx Altsa With longevity in mind, ZŁOMIARZE is one of the few manufacturers to introduce a central cooling system for the magnetic rotor bearings, which extends the machine's lifespan severalfold. Technical specifications: • Magnetic field source – NdFeB magnets • Variable magnetic rotor speed – 0–3000 rpm • Adjustable belt speed • Belt position control system • Rotor cleaning paddles • Belt cleaning scraper • Two-axis adjustable material splitter • Bearing cooling system (significantly extends bearing life) • Electrical control cabinet with safety monitoring For our non-ferrous metal separators, we also offer additional equipment to facilitate the separation process: • Vibratory feeder • Discharge conveyors • Drum and belt magnetic separators For more information, please refer to our catalogs. Contact us for details!

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Rezalnik zelja S65, stroj za rezanje zelja, letnik 2020, iz nerjavečega jekla, opremljen z dvema zgornjima odstranjevalcema stebla, zmogljivost 5000–7500 kg na uro, premer diska 650 mm omogoča uporabo za cele velike glave zelja, mobilen, trifazni priklop (3Ph). Tsdpfx Aey H Hm Rjltoa

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 330 mm, premer struženja: 350 mm, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 330 mm, moč vretenovega motorja: 15.000 W, največja hitrost vrtenja: 6.000 obr/min, skupna masa: 3.200 kg, premer nihanja nad prečno desko: 600 mm, prehod palice: 65 mm, Premer palice (maks.): 65 mm, We offer this as-new DN Solutions Lynx 2100 CNC Lathe Lynx 2100 GT2100 GT2600, year of manufacture 2026. Tedpfoyzbdgex Altja Listing title: DN Solutions (Doosan) Lynx 2100 – As-new condition (only 50 operating hours!) Description: We are offering a DN Solutions (Doosan) Lynx 2100 CNC lathe in as-new condition. The machine was purchased for a specific project and was only used minimally. It is currently in a showroom-like state with less than 50 operating hours. Condition: As new, no signs of use, fully functional Availability: Immediately available Main advantage: Avoid long lead times and secure a machine in new-machine quality, ready for immediate delivery. Technical specifications: Control: Fanuc i-Series Swing over bed: 600 mm Maximum turning diameter: 350 mm Maximum turning length: 330 mm Bar capacity: 51 mm / 65 mm Spindle speed: 6,000 rpm Number of tool stations: 12 Main drive power: 15 kW Machine weight: approx. 3,200 kg If you have any questions or need further information, please feel free to send us a message or call us.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, A new control system for your machine – modern servos – new control – up to 6 axes The Retrofit Kit V2.0 enables the existing scale on industrial machines of the Maho 600 series to continue to be used. In the past, digital signal processing was used, which required feedback from the motor to the servo amplifier. In the analog system, the feedback is routed to the CSMIO. This means that the motor encoder is only needed for the servo amplifier and no longer for the CNC control system. As a result, pitch errors can be eliminated thanks to the direct measurement method. The kit for the Deckel Maho 600 series includes: - 1 x Delta B3 controller with 1500W power output - 1 x Delta B3 motor 1500W with brake - 2 x Delta B3 controllers with 1000W power output - 2 x Delta B3 motors 1000W - 2 x encoder cables 5 meters - 2 x motor cables 5 meters without brake - 1 x encoder cable 3 meters Tsdpfx Alsxz Dkgetea - 1 x motor cable 3 meters with brake - 2 x B3 add-on boards without brake incl. 3 patch cables per add-on module - 1 x B3 add-on board with brake incl. 3 patch cables per add-on module - 1 x BIG IO interface module - 1 x Maho Deckel & Co connection board - 2 x encoder circuit boards - 1 x digital input 12-23 circuit board - 1 x set of patch cables - 1 x CSMIO IP-A controller - 1 x SIM milling software with special interface - 1 x 24V 10A power supply - 1 x power distribution unit with LED indicator - 1 x C2000 4.0 kW frequency inverter We are also happy to provide a quote for Deckel, Mikro, etc.

Stanje: rabljeno, Leto izdelave: 2019, Proizvajalec: Novexx Solutions Model: TE 204 Leto: 2019 Tip: Naprava za nanašanje varnostnih etiket (tamper-evident) Tip obdelovanih izdelkov: Karton Glava za etiketiranje: ALS204 Hitrost doziranja: maks. 40 m/min Širina etikete: 10 - 110 mm Tsdpeygndiofx Altoa Dolžina etikete: 5 do 600 mm Napajalna napetost: 220V Moč motorja: 2,5 kW Tehnična dokumentacija Dimenzije: 2363 x 1455 x 1420 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, najv. debelina pločevine: 110 mm, skupna dolžina: 4.370 mm, skupna širina: 2.205 mm, skupna višina: 2.320 mm, skupna masa: 6.150 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 110 mm, vhodna frekvenca: 50 Hz, moč: 30 kW (40,79 KM), širina obdelovanca (maks.): 1.200 mm, vhodni tok: 59 A, This SER1200 Multibrush VAC is currently available in our showroom and has only been used for several demonstrations. You can still view this machine at our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 controllable motors. The entire finishing machine is operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The touchscreen allows for easy selection of various finishing programs, resulting in high repeatability of product quality and preventing setup errors by the operator. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always guaranteed. At the first station, burrs and irregularities are removed using a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply light pressure to the product, rounding all edges and holes both around and in the surface of the product. For the final process, the Multibrush round brushes ensure flawless post-processing. The six brushes provide a non-directional finish and round the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. Tjdpfoyt Nm Eex Altja The SER1200 Multibrush finishing machine is also available in an XL version, which adds a fifth station to the machine. This fifth station features a second grinding unit, allowing you to apply a line finish to your product using a finer grinding belt or scotch-brite belt. The SER finishing machine uses a unique brush combination, with Q-Fin being the only supplier on the market offering this solution, which we call: "The Ultimate Qombination." This allows a radius of 2+ mm to be achieved in a single pass. The SER1200 enables full ERP control and seamless integration into automated production processes — in short, a finishing machine ready for the future!

Stanje: dober (rabljeno), Leto izdelave: 2016, This F200XL-VAC is used but has been inspected and is in excellent condition. The F200 XL is a 3-station machine, equipped as standard with the brush height tracking system designed by Q-Fin. Combined with its straightforward push-button control system, this ensures that setting up and operating the F200 is intuitive, resulting in the most user-friendly machine available on the market. The machine comes as standard with infinitely variable speed adjustment for both the conveyor and the brush(es) and/or grinding head(s), making all possible operations and finishes achievable. You determine the desired finish yourself. The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g., stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the conveyor table, allowing even smaller workpieces (from 10x10 mm) to be processed safely, trouble-free, and quickly. At Q-Fin, we are convinced: a narrower machine is ideal for small workpieces, while a wider machine suits larger parts. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. Tsdpfx Aoyt Nhvoltja You can view this machine in our showroom in Bergeijk.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, delovna širina: 200 mm, 2024 Deburring and Finishing Machine F200 XLDS with Magnetic Fixture. Suitable for deburring, edge rounding, deslagging and/or grinding of steel parts up to 200 mm width. This refers to an F200 XLDS 4-station machine, type TS, with touchscreen control. Compared to the standard F200 XL, this machine is equipped with a slag removal roller for the efficient removal of slag from plasma-cut components. The F200 deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magnetic sheet metal parts between 15 and 200 mm wide. High-speed deburring, deslagging, grinding and edge rounding. This deburring machine features a slag removal roller ("slag hammer") as the first working station. The second station is an abrasive belt, followed by two stationary disc brushes; one rotates clockwise (CW), the other counterclockwise (CCW). Tedpfxehnc E As Altsa Compared to other deburring machines, the F200 DS offers an extremely high processing speed while achieving superior edge rounding in a single pass. The machine is supplied as standard with fully adjustable speeds for the conveyor belt and the grinding and/or brush heads, allowing every conceivable process step and result to be set. You define the desired finish. Simple operation via HMI touchscreen at the front of the machine. The magnetic system securely fixes parts to be processed on the conveyor belt so that even small workpieces (from 15 x 15 mm) can be processed safely, quickly and without issues. At Q-Fin, we strongly believe in a narrow machine for small workpieces and a wider machine for larger items. In many cases, the output of this machine is five times higher than comparable machines. See for yourself and book a demonstration. We can now offer you this F200 DS - MAG demonstration machine, year of manufacture 2023, optionally in combination with a WES3000 wet extraction system and the associated ductwork. Available only while stocks last. The machine comes with a 1-year warranty excluding wear parts. Delivery ex works Bergeijk. If required, we can also offer transport, installation, and on-site operator training. The machine can be viewed in the showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us for an attractive quotation.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna dolžina: 13.000 mm, skupna širina: 5.650 mm, skupna višina: 3.300 mm, vhodni tok: 10 A, vhodna frekvenca: 50 Hz, Spiral Bread Cooler (Industrial) Tjdpfx Alsy Au Injtsa An industrial spiral bread cooler is offered, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. The spiral has a total length of approximately 420 meters, ensuring uniform cooling of the production. The time for one complete rotation is about 94 minutes, allowing for an efficient cooling process after baking. The system capacity is around 2,500 loaves per hour, with simultaneous accommodation of up to 4,000 loaves and a total weight of approximately 2,566 kg. The construction allows configuration as a single or double spiral (figure-eight type), depending on production needs. It is suitable for integration into existing bread and bakery production lines. Main parameters: External diameter: approx. 5.65 m (for one loop) Height: approx. 3.30 m Required floor space: around 12–13 m in length (depending on configuration) Power supply: 400V AC / 24V DC Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 The machine is sold disassembled. All components are available. It was operational up to dismantling and is in good technical condition. On-site inspection possible by prior arrangement. Additional information can be provided upon request.

Stanje: novo, Leto izdelave: 2025, Capacity: 1000 - 1500 kg/hour Tjdpfxsd Im Ads Altoa Electric motor power: 15 kW Machine weight: 1800 kg

Stanje: novo, Leto izdelave: 2025, • Shearing force: 700 t • Holding clamp force: 120 t • Box closing force: 240 t Todsdd Tp Ropfx Altoa • Pusher ram force: 150 t • Cutting width: 800 mm • Box length: 6000 mm • Box width (open): 2550 mm • Box width (closed): 800x600 mm • Electric power: 2 x 90 kW • Maximum operating pressure: 315 bar • Capacity: 15 - 20 t/h (iron/steel) • Shearing capacity: 12 - 16 t/h (iron/steel) • Weight: 70,000 kg

Stanje: novo, Leto izdelave: 2024, Na voljo so tudi različni modeli! 1. Velikost bala: 600 mm x 400 mm x ... Tjdpfx Alodfc Unotoa 2. Dimenzije posode (širina x dolžina x višina): 620 mm x 1300 mm x 620 mm 3. Kapaciteta: 0,8 – 1,2 tone/uro (železo – jeklo) 4. Teža bala: 45–100 kg 5. Čas cikla: 90 sekund 6. Tlak cilindra zgornje pokrovnice: 63 ton 7. Tlak glavnega cilindra: 110 ton 8. Splošni delovni tlak: 250 bar 9. Dimenzije stroja (širina x dolžina x višina): 2120 mm x 4350 mm x 1320 mm 10. Elektromotor: 15 kW 11. Teža stroja: 6.800 kg 12. Batnice so indukcijsko kaljene in kromirane. 13. Na voljo je ročna krmilna ročica. 14. Stene komore za odpadke so prevlečene z materialom HARDOX 450. 15. Stroj se upravlja ročno. 16. Na voljo bo sistem za hlajenje olja. 17. Vso elektronsko opremo dobavlja podjetje SCHNEIDER ali blagovna znamka SIEMENS. 18. Stroj je v lasti podjetja AYMAS Makina San. Ve Tic. Ltd. Şti. Zagotavljamo garancijo proti proizvodnim napakam za eno (1) leto ali 2500 delovnih ur.

Stanje: novo, Leto izdelave: 2025, Also available in various models! 1. Bale size: 400 mm x 400 mm x. 2. Hopper dimensions (width x length x height): 800 mm x 2500 mm x 800 mm 3. Capacity: 3,000 – 4,000 kg/hour (iron and steel) 4. Cycle time: 90 seconds 5. Upper cover cylinder pressure: 90 tons 6. Pre-compaction cylinder pressure: 140 tons 7. Main compaction ram force: 210 tons 8. Maximum operating pressure: 300 bar 9. Electric motor: 37 kW 10. Machine dimensions (width x length x height): 3,400 mm x 6,800 mm x 3,000 mm 11. Machine weight: 18,000 kg 12. Container walls are lined with HARDOX 450 – 500 material. 13. Piston rods are induction-hardened and chrome-plated. 14. Pumps and valves used in the hydraulic system are branded components such as PARKER, BOSCH-REXROTH, EATON-VICKERS, or KAWASAKI. 15. Includes an oil cooling system. 16. The machine operates fully automatically with PLC control. 17. All electrical components are German brands, either SCHNEIDER or SIEMENS. 18. Automatic loading shovel included with the machine. 19. The machine is CE and GOSTR certified. The marking certifies that a product meets requirements regarding consumer safety, health, or the environment. Tedpfxsdfc Iys Altsa 20. The machine comes with a warranty from AYMAS Makina San. ve Tic. Ltd. Sti. against manufacturing defects for one (1) year or 2,500 operating hours.

Stanje: novo, Leto izdelave: 2025, 1. Total electric motor power: 360 kW 2. Machine weight: 44,000 kg 3. Shredding capacity: 10 – 15 tons/hour (iron & steel) 4. Number of blades: 78, blade thickness: 150 mm 5. Loading chamber dimensions: 2350 x 4085 mm 6. Shredding chamber dimensions: 1500 x 2000 mm Tjdpfodfc Uzjx Altja 7. Blade replacement and maintenance can be easily carried out from the top of the chamber. 8. Cutting blades are made of material no. 2767 9. Main shafts are made of material: 42 CrMo4, 32-34 HRC (torsion and fracture resistant) 10. All chamber walls are lined with wear-resistant HARDOX 500 steel. 11. All static lamellas and spacer rings are made from HARDOX 450. 12. Speed: 4.5 – 6 rpm 13. Shaft movement is provided by four planetary reducers, powered by four power-regulated, bi-directional hydraulic motors. Hydraulic equipment is by PARKER or BOSCH-REXROTH. 14. Separate cooling units are provided for hydraulic oil and gearbox oil. 15. Each shaft can operate independently. 16. The shredder can be loaded by crane. 17. The machine stops automatically with an acoustic warning via safety sensors that protect the machine from damage. 18. An automatic central greasing system is provided to keep the bearings lubricated automatically. 19. All electrical components are by SCHNEIDER and SIEMENS. 20. The machine is fully automated via PLC control. The operator panel features a touchscreen for easy access to machine settings and process monitoring. 21. The machine is covered by AYMAS MAKİNA San. ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (3000) operating hours. 22. The machine is CE-certified. The label certifies that the product complies with European directives regarding consumer safety, health, and environmental protection.

Stanje: novo, Leto izdelave: 2025, - Cutting force: 1,600 tons - Capacity: up to 70 tons per hour - Side compression force: 2 x 220 tons - Clamp pressure: 250 tons - Motor: 480 kW Tjdpfx Ajgv Acuoltoa - Machine weight: 150,000 kg - PLC controlled - Remote control available - Adjustable output length

Stanje: novo, Leto izdelave: 2025, Various models available! 1. Bale size: 500 mm x 500 mm x ... 2. Container dimensions (Width x Length x Height): 2000 mm x 2500 mm x 1100 mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle time: 90 seconds (idle) 5. Push force of top lid cylinder: 90 tons 6. Preliminary pressure of compression cylinder: 150 tons 7. Main compression ram force: 300 tons 8. Maximum operating pressure: 300 bar 9. Electric motor: 2 x 75 kW = 150 kW 10. Machine dimensions (Width x Length x Height): 10000 mm x 10000 mm x 4000 mm 11. Machine weight: 55,000 kg 12. An ejection door will be provided. 13. Blades are repairable and square. 14. Container walls are lined with HARDOX 450 - 500 material. 15. An automatic SKF liquid lubrication system is integrated in the compression chamber. 16. An automatic SKF lubrication system is included to lubricate the bushings. 17. Piston rods are induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system are from PARKER or EATON VICKERS & KAWASAKI. 19. A bypass filter is added to the hydraulic system. 20. An AKG hydraulic oil cooling system is provided. Tjdegwa T Repfx Altoa 21. All electrical components are from SIEMENS or SCHNEIDER. 22. The machine will be fully automatic with PLC control; the PLC brand and model will be SIEMENS. In addition, a SIEMENS HMI Simatic touchscreen panel will be provided, equipped with emergency stop buttons at critical points. 23. The edges of the top cover and the sides of the scrap chamber are fitted with blades made from 2767 material (hardness 55 HRC). 24. The machine will be under an AYMAS Makina San. Ve Tic. Sti. warranty for 1 year or 2500 operating hours, whichever comes first in case of manufacturing defects.

Stanje: novo, Leto izdelave: 2025, Various models also available! 1. Briquette diameter: Ø 80 mm 2. Capacity: 700-900 kg / hour (copper) 3. Preliminary ram force: 12.5 tons 4. Main compression cylinder force: 250 tons (5 tons / cm²) 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 - 14 sec 7. Electric motor power: 30 kW Tjdpfx Alogwa Urotsa 8. Machine dimensions (width x length x height): 2200 mm x 2600 mm x 2800 mm 9. Machine weight: 6,000 kg 10. Screw conveyor feeds automatically fill the compression chamber, and the integrated vibrating hopper ensures chamber safety by preventing oversized material from entering. 11. Cylinder rods are induction hardened and chrome-plated. 12. Hydraulic oil cooling system implemented. 13. Hydraulic system pumps and valves are sourced from globally renowned brands such as PARKER. 14. The machine is fully automatic with PLC control. 15. All electrical and electronic components are SCHNEIDER or SIEMENS brand. 16. The machine is CE-certified. The marking verifies compliance with European directives regarding consumer safety, health, or environmental requirements. 17. The machine is backed by an AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (2,500) operating hours.

Stanje: novo, Leto izdelave: 2025, - Shearing force: 1,350 tons - Capacity: up to 50 tons per hour - Side compression force: 2 x 180 tons - Clamp pressing force: 250 tons - Motor: 396 kW - Machine weight: 120,000 kg - PLC controlled - Remote control available Tjdpfx Alogv Abpotea - Adjustable output length

Stanje: novo, Leto izdelave: 2025, Various models available! 1. Briquette diameter: Ø 160 mm 2. Capacity: 4,500 - 5,500 kg/hour (iron and steel) 3. Preliminary compaction force: 50 tons 4. Main compression cylinder pressure: 600 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 - 14 seconds 7. Electric motor power: 170 kW total 8. Machine dimensions (width x length x height): 5,200 mm x 8,000 mm x 3,100 mm Tsdpegv I Ihefx Altsa 9. Machine weight: 42,000 kg 10. Screw conveyor feeders automatically fill the compression chamber and the built-in vibrating hopper ensures chamber safety by preventing oversized material from entering. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system implemented. 13. Hydraulic system pumps and valves are from PARKER or BOSCH-REXROTH brands. 14. Machine is fully automatic via PLC control. 15. All electrical and electronic components are SCHNEIDER or SIEMENS brand. 16. The machine is CE certified. The marking certifies that the product complies with European directives regarding consumer safety, health, or environmental standards. 17. The machine is supplied under the AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (2,500) operating hours.

Stanje: novo, Leto izdelave: 2025, Various models available! Todpfxsgv I N Uo Altea 1. Briquette diameter: Ø 200 mm 2. Capacity: 12,000 kg/hour (steel) 3. Preliminary pressure stroke: 50 tons 4. Main compression cylinder pressure: 800 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 10 - 12 seconds 7. Electric motor power: 6x37=222 kW (main motors) 8. Machine dimensions: 11,000 mm x 10,000 mm 9. Machine weight: 60,000 kg 10. Screw conveyor feed automatically fills the compression chamber, and the integrated vibrating hopper ensures chamber safety by feeding oversized material into the chamber. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is implemented. 13. Hydraulic system pumps and valves are from leading brands PARKER or BOSCH-REXROTH. 14. The machine operates fully automatically via PLC control. 15. All electrical and electronic components are supplied by SCHNEIDER or SIEMENS. 16. The machine is CE certified. The CE marking certifies that the product meets European guidelines regarding consumer safety, health, and environmental protection. 17. The machine is covered by an AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (2500) operating hours.

Stanje: novo, Leto izdelave: 2025, Various models available! 1. Bale size: 400 mm x 400 mm x ... 2. Press box dimensions (W x L x H): 1000 mm x 2700 mm x 900 mm 3. Feed hopper dimensions (W x L x H): 1650 mm x 2300 mm x 800 mm 4. Infeed opening (W x L): 1000 mm x 1600 mm 5. Capacity: 4–6 tons/hour (aluminum), 12–19 tons/hour (copper), 11–17 tons/hour (steel) 6. Cycle time: 30 seconds 7. Pre-compression force: 140 tons 8. Secondary compression force: 210 tons 9. Main compression force: 290 tons 10. Operating pressure: 300 bar 11. Electric motor: 150 kW 12. Machine weight: 60,000 kg 13. Remote control available 14. Curved shape of compression chamber plates Tjdpedfcqajfx Altoa

Leto izdelave: 2024, stanje: novo, - Cutting force: 1,100 tons - Capacity: up to 50 tons per hour - Side compression force: 2 x 120 tons - Clamp pressure force: 160 tons - Motor: 264 kW - Machine weight: 85,000 kg Todpfx Aljdfcpastea - PLC controlled - Remote control available - Discharge length adjustable

Stanje: novo, Leto izdelave: 2025, - Cutting force: 700 tons - Capacity: up to 20 tons per hour - Side compression force: 2 x 85 tons - Clamping force: 100 tons Tsdpfx Asgv Aacjltja - Motor: 160 kW - Machine weight: 55,000 kg - PLC controlled - Remote control available - Adjustable output length