Scm Sandya 5 nakup rabljenega (576)

Stanje: zelo dobro (rabljeno), SCM Sandya 5 širokopasovni brusilni stroj - Največja širina brušenja: 110 cm - Največja višina brušenja: 16 cm - Prva enota: jekleni kalibracijski valj - Druga enota: gumirani valj Brusilni čevelj - En motor poganja dve enoti: dvostopenjski motor, 1450 o/min, 8,8 kW 2940 o/min, 11 kW - 2 hitrosti traku - Teža: 1190 kg Kfsdoxbzlzopfx Ah Aea - Dolžina: 200 cm, širina: 148 cm, višina: 190 cm

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7850 Technical data: Kjdpfox Hhy Sjx Ah Ajfa - maximum workpiece width: 1100 mm - maximum workpiece height: 160 mm 2 sanding units: 1) grooved rubber roller for calibration 2) grooved rubber roller + pneumatic segmented pad + steel roller - main motor power: 15 kW - brake Top section: - segmented rubber feed roller - sanding unit - segmented rubber feed roller - sanding unit with segmented pad - segmented rubber outfeed roller - cleaning brush Bottom section: - 2 metal feed rollers - conveyor belt - 2 metal outfeed rollers - pneumatic belt oscillation with photocell control - electric table height adjustment - 2 feed speeds - feed motor 0.75 kW - sanding thickness potentiometer - operating pressure: 8-10 bar - extraction port diameter: 3 x 165 mm - overall dimensions (L/W/H): 1900 x 1700 x 1930 mm - weight: approx. 1,502 kg ADVANTAGES – Italian production, SCM brand – 2 sanding units – sanding thickness potentiometer – pneumatic segmented pad – original paint (not repainted) – operation and maintenance manual (DTR) – used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may be subject to change with major currency fluctuations)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: Kodpfxsxqggcs Ah Asfa • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2023, Technical Data Working Area I.M.S. I.U. Working area X-axis: 5515 mm (217") Working area Y-axis: 1620 mm (63¾") Panel passage Y: 1900 mm (74¾") Panel passage Z: 250 mm (9¾") Workpiece length for pendulum operation: 2600 + 2600 mm (102" + 102") Traverse speed X-Y axes PRO-SPACE: 56 m/min (184 ft/min) Traverse speed X-Y axes PRO-SPEED: 78 m/min (256 ft/min) * For further details, please refer to the respective machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for motor JQX or to 1720 mm (67½") for motor KS/KT Maximum loadable panel width for horizontal drilling, only with vertically oriented electrospindle, without central reference stops Kfodoxwht Depfx Ah Aoa Installation Data I.M.S. I.U. Installed power: 23 – 28.5 KVA Electrical standard specifications: 400 V voltage, 50 Hz frequency, 3 phases Air consumption: 450 Nl/min Compressed air consumption: 4500 m³/h (2650 CFM) Extraction air speed: 30 m/s Extraction nozzle diameter: 250 mm (9.8 inches) Noise level: - VSA* when drilling: 72.2 dB(A) - LAV* when drilling: 74.6 dB(A) - when milling: 74.3 dB(A) - LAV* when milling: 80.7 dB(A) Reference standard EN ISO 11202:1995 * VSA = without load and without extraction * LAV = in operation, with extraction Location: Nattheim

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Standard equipment and accessories - Swiveling control panel easily accessible to the operator "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operation modes * Operator assistance with the option to manage 3 different points on the tool for precise determination of the zero point * Capacity to store up to 1,000 programs with related images * Capacity to store up to 1,000 different tools with related images * USB port * Network connection ready - Operator assistance on the electronic control system including: * Tool database management * Indication of coordinates for 3 points on the tool to define a new zero point * Management of the tool's edge speed * Operator guidance for common machining operations - "Flex" milling fence with automatic adjustment via electronic control. Complete fence compensates for tool diameter, infeed jaw for desired chip removal. The "FLEX" fence can be moved away from the worktable. - Aluminum fence jaw for the milling fence with inserts for a continuous support surface - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support area adjustment - Electrical pre-wiring for a power feed unit - Spindle with reversible direction (right/left rotation) - Automatic motor start - M-E version includes: * Electrospindle with maximum performance from 3,400 rpm * Electrospindle power 7.5kW 10HP [S6 -40%] * Interchangeable MK5 spindle * Frequency inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling cutter guard, maximum tool diameter 160 mm - Electronic motor brake with guaranteed function even in case of power failure - Safety sensors during tool change for: spindle stop, spindle lock, tool holder open/close - Electropneumatic spindle lock - Micro safety switch at machine door - Emergency stop switch - Lockable main switch - Motor protection circuit breaker - Auxiliary circuit 24V - EC Declaration of Conformity - Frequency 50 Hz (931201) - Base (083250) - MACHINE LANGUAGE: German (109993) - Standard safety regulations (109999) - 570257 Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the power feed unit to be swung away from the worktable. - 930731 Volt 400 EU - 570288 Quick tool clamping "T-SET" Enables clamping/releasing tools using a simple air gun. - R00845 L'invincibile TI 5 CE version Kodpfx Aox Nbzueh Aefa - 110293 LL version worktable with two cast iron table extensions. Total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - 131304 Milling spindle diameter 30 mm. Availability: prompt

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, SCM Sandya 10 RCS 110 1. Agregat: jekleni valj Kodpfx Ahex Dy Tvj Aofa 2. Agregat: kombiniran, gumijasti valj s pnevmatsko vodeno brusilno čeveljčko nov transportni trak in nov gumijasti valj samodejno pozicioniranje mize hitrost podajanja traku 4,5/9 m/min odprtina mize 3-160 mm mere brusnega traku 1900 x 1115 mm teža 1600 kg leto izdelave 1994

Stanje: dober (rabljeno), Koda: 0667 Znamka: SCM Model: SANDYA UNO/RCS Avtomatski širokopasovni brusilnik z 2 trakovi (valj + blazinica) za pohištvo, notranjo opremo, lesena vrata in okna, vrata ter različne plošče Sestava: 1° Skupina: jekleni kalibracijski valj 2° Skupina: valj + zaključna blazinica Tehnični podatki: Delovna širina: 920 mm Delovna višina: 3 - 160 mm Dimenzije brusnega traku: 930 x 1525 mm Število 2 hitrosti podajanja traku: 4,5/9 m/min Moč glavnega motorja: 10 KM Kjdox A A Dujpfx Ah Ajfa Vhodni in izhodni valjčni transporterji Električni dvig mize Delovni pritisk: 6 atm Število sesalnih priključkov: 2, premer 160 mm Skupne dimenzije: 1500 x 1600 x 1700 h mm Teža: 1070 kg

Stanje: skoraj kot novo (rabljeno), delovna širina: 1100 mm agregat s kovinskim valjem Kfsdpfex H Rq Hox Ah Aea drugi agregat gumijast s čeveljčkom moč motorja 11 kW oscilacija na fotocelicah 2 hitrosti podajalnika čevljek avtomatsko sprožen z regulacijo vklop agregatov s kontrolne plošče senzor debeline materiala leto proizvodnje 2002

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Kedpfx Ahecrnm Ne Ajfa Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Prodajam širokopasovni brusilni stroj SCM Sandya 7 S 110, letnik 2006. Konfiguracija: Kalibracijski jekleni valj 11 kW Brusilni valj iz trde gume 11 kW Valj iz mehke gume Delovna širina 1100 mm Pritiskalni valji za kratke elemente Kedpfx Ahextxhko Aofa Pnevmatsko čiščenje za vse enote Skupna teža 2400 kg 2 motorja po 11 kW Vključena popolna dokumentacija Stanje KOT NOVO! Stroj je bil zelo malo v uporabi. Na voljo takoj.

Stanje: zelo dobro (rabljeno), SCM Sandya 1K Uno tračna široka brusilka - Kombinirana naprava z jekleno gredjo in brusilnim krožnikom - 2 hitrosti podajanja - Dimenzije traku: 970 x 1525 mm - Fotoelektrična oscilacija - Motor 7,5 kW Stroj je v zelo dobrem stanju. Kfjdpfx Ahsx E Ryxo Aea

Stanje: rabljeno, Leto izdelave: 2022, Premični voziček: 3200 mm Širina reza: 1000 mm CNC vzporedni prislon Predrezovalnik Kotni prislon z digitalnim prikazovalnikom Električno nagibanje in nastavitev višine Upravljalna plošča v višini oči Lokacija skladišča: Nattheim Kfjdoxqtvqepfx Ah Aoa

Stanje: dober (rabljeno), Koda: 0249 Znamka: SCM Model: SANDYA 3 - RCS - CE standard Avtomatski dvopasovni kalibrirni brusilni stroj za mizarstvo, pohištvo, po meri izdelano opremo, lesena okenska okvira, panele in drugo – CE standard Tehnični podatki: Delovna širina: 950 mm Min./maks. delovna debelina: 4/170 mm Mere brusilnega traku: 1900 x 970 mm Moč motorja: 10 Hp Hitrost pomika traku: 4,5/9 m/min Ksdpfxoxz Hcrs Ah Ajfa 1. skupina: kalibracijski valj iz jekla 2. skupina: kombinirana skupina z brusnim valjem 45 Shore – zaključna blazinica Avtomatska nastavitev višine mize Digitalni prikaz delovne debeline Vhodni in izhodni transportni valji Stisnjen zrak: 7-8 bar Premer priključka za odsesavanje: 140 mm Skupne mere: 1350 x 1600 x 2000 h (mm) Teža: 970 kg

Stanje: rabljeno, SCM Sandya 600 RCS 110 Širokopasovni kalibrirni finiš brusilni avtomat Zahtevni brusilni center za kalibracijo, brušenje masivnega lesa in finiš brušenje furnirja VRHUNSKA OPREMA 1. Kalibrirna brusilna enota z RA poševno rebrastim jeklenim kontaktnim valjem 2. Kombinirana brusilna enota s kontaktnim valjem premera 140 mm, trdota 85 Shore, elastični členasti brusilni čevelj s sektorji elektronsko krmiljen Delovna širina 1100 mm Glavna moč motorja 15 kW Izvedba "B" za RCS MESAR elastični členasti brusilni čevelj Elektronska programska enota "LOGIC SC zaslonsko krmiljenje" Ksdpfx Ahextan So Asfa Elektronska nastavitev delovne višine z avtomatskim prepoznavanjem obdelovancev Valjčna miza na vstopu in izstopu za dolge obdelovance Stroj iz male obrtne delavnice / LEASINGNI ODKUP Prva dostava 2017 Na zalogi v Liebochu / MOŽNOST LEASINGA

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: Kfsdpfsd Etkhex Ah Aea • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Moč motorja 11 kW Prvi kalibrirni agregat s kovinskim valjem Drugi agregat z gumijastim valjem Ksdpfx Ajx Ev Afjh Aofa Odpihovalec traku Delovna širina 1100 mm Dve hitrosti podajanja brusilnih trakov Gladko nastavljiv pomik preproge Električna nastavitev višine mize Copatek z nastavitvijo časa delovanja Krtača na izhodu elementa Pnevmatska oscilacija

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 950 mm, višina brušenja: 170 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, - italijanska proizvodnja - leto izdelave: 2007 Kfodoxdxfqspfx Ah Aoa - kombinirana čeveljska enota TEHNIČNI PARAMETRI: - širina brušenja: 950 mm - višina brušenja: 4-170 mm - moč motorja: 11 kW - 1. agregat: jekleni valj s pnevmatskim pritiskom - premer valja: 110 mm - 2. agregat: kombinirana čeveljska enota - pnevmatski pritisk gumijastega valja: 78 Shor'a - čevelj s pnevmatskim pritiskom - pnevmatska oscilacija - vpih na trakove - električna nastavitev višine - dve hitrosti traku: 8,3 m/s in 16 m/s - elektronsko pozicioniranje višine brušenja - gladko nastavljiva hitrost pomika: od 4-20 m/min - minimalna dolžina materiala: 500 mm - premer nastavka: 2 x 140 mm - dimenzije stroja (d/š/v): 150 x 180 x 210 cm - teža: ~ 1010 kg

Stanje: rabljeno, Leto izdelave: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling, made for you! This numerically controlled machining center comes equipped with a comprehensive range of milling/drilling tools to meet any requirements for processing wood and similar materials. - Highly efficient, equipped with drilling spindles at 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free operating hours. - Superior and more comprehensively equipped: various configuration options via the multifunction table, allowing the machine to be optimally equipped according to specific requirements. - Easier and more intuitive programming, thanks to the integrated Maestro CNC CAD/CAM module. - User-friendly: The work table is always accessible, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid. The especially wide support surface was specially designed to provide the machine with maximum stability, ensuring lasting precision regardless of operating conditions, and does not require anchoring to the floor. The base forms a large and solid support for the moving gantry: the work unit is thus equipped with a balanced, stable, and highly resilient support, capable of withstanding even the most demanding stress loads, leading to improved performance quality and greater accuracy. The moving gantry is a solid single component anchored to both sides of the base and slides along prismatic guides with recirculating ball shoes of the highest quality. Dual motorization along the X-axis ensures top performance even under heavy-duty operating conditions. Movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is achieved via a helical rack and pinion drive. This provides greater tooth-on-tooth engagement, achieving higher acceleration as well as increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the finest machining quality by eliminating vibrations. Movement along X-Y-Z axes is provided by brushless motors, powered by static inverters, delivering: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No more reference point setup at machine startup due to absolute encoders Ksdpfx Aevvi N Ioh Aofa - Eliminated general maintenance for the drive system since the brushless system contains no brushes Management of axis movements and general machine components is performed via an industrial NS module with digital D...

Stanje: rabljeno, Leto izdelave: 2014, Price: On request What are Presale items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines solely based on photos and sell them with the information provided in the listing. Unfortunately, we do not have any additional details, such as exact dimensions or machine specifications. Furthermore, these machines are often not yet in stock and have not been inspected by us. These machines are offered at attractive prices, meaning the prices are lower than usual, but the risk is entirely assumed by the buyer. Please review the information in the listing carefully before making a purchase. If you have any questions, please feel free to contact us! - Machine available from: 2026-03-30 - Year of manufacture: 2014 Kodsx Hwhxjpfx Ah Ajfa - Documentation available: No - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs]: 1 - Type of milling table: Beam table - Boring tool included: Yes - Tool changer stations [pcs]: 12 - CNC documentation available: USB stick Financial Information VAT: The stated price is excluding VAT VAT/Margin Scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Stanje: rabljeno, Tehnični podatki: Delovna širina: 900 mm 1 kalibracijska enota Premer valja: 120 mm 2 kalibracijski enoti Premer valja: 120 mm Kfodpfx Aexz An Roh Aea Višina obdelovanega materiala: 160 mm Premer odsesovalne cevi: 2 x 160 mm Električno dvigovanje Varnostno stikalo Moč glavnega motorja: 9 kW Napetost: 380 V Skupne dimenzije: Dolžina: 1550 mm Širina: 1460 mm Višina: 1800 mm

Stanje: rabljeno, številka stroja/vozila: 008319, Delovno območje os X: 6380 mm Delovno območje os Y: 1380 mm Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 11 kW Kfedpfx Ahjx A Tc Ie Asa Število krmiljenih osi: 5 osi Število mest za orodja: 32

Stanje: skoraj kot novo (rabljeno), delovna širina 1350 mm kalibracijski agregat z kovinskim valjem kombiniran agregat z dvema gumijastima valjema in večsekcijskim copatom oscilacija s fotocelicami aktivacija funkcij stroja s panela pihanje traku neprekinjeno uravnavanje hitrosti pomika brusilnega traku na 2. agregatu večsekcijski copat pnevmatsko vklopljen z regulacijo leto izdelave 2007 Kfsdox Daz Hepfx Ah Aea električna nastavitev mize merilnik debeline materiala vakuumska podtlačna miza

Stanje: novo, Leto izdelave: 2025, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder Item No.: 5501086 Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside Saw unit tiltable from 90° to -45° High-precision sliding table made of anodised aluminium Large outrigger table (1200 x 650 mm) With material roller and extendable aluminium telescopic fence up to 3300 mm Tilting spindle moulder from 90° to -45° backwards into the fence Four spindle speeds Spindle with reversible direction of rotation Three independent motors Equipped with lockable main switch and motor protection switch Standard with separate parallel rip fence and jointer fence for edge jointing Equipment Details: Sliding Table with Ball Contact System Made of anodised aluminium Guides of hardened and ground steel, 15% harder than standard steel Twin-trunnion Spindle Moulder Unit Tiltable, made of grey cast iron Mounting points directly to the table for optimal smooth operation Spindle located high on precision ball bearings for lowest bearing load and maximum service life Powerful industrial motors Spindle Moulder Fence Kfsdjd Hx Hmepfx Ah Aoa Heavy-duty professional version High-quality grey cast iron fence supplied as standard with fine adjustment 3-positioned stops for quick repeatability Fine adjustment via rack and pinion, numeric display and aluminium fence jaws Rip Fence With fine adjustment and quick clamping Stable round bar guide made from ground steel Easily foldable for large workpiece cutting Reversible aluminium fence ruler for narrow workpieces Grey Cast Iron Twin-Trunnion Saw Unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Bearing close to saw blade on both sides Height and angle tilting up to 45° Scoring unit with separate 0.55 kW scorer motor as standard Outrigger with angle-adjustable telescopic crosscut fence with mitre scale Dimensions & Weights Approx. weight 900 kg Dust Extraction Connection Extraction port diameter 3 x 120 mm Extraction port diameter blade guard 80 mm Drive Power Scorer Motor 0.55 kW Main Motors 2 x 5.0 kW Electrical Data Voltage 400 V Sliding Table and Table Sliding table width 360 mm Sliding table height 142 mm Table length 1380 mm Table width 465 mm Spindle Moulder Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Max. Cutter Diameter lowerable 240 mm Tenoning 320 mm Panel Saw Unit and Scorer Cutting length 3200 mm Cutting width with rip fence 900 mm Max. crosscut width left of blade 3300 mm Saw blade tilt 90 – 45° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - available immediately -

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.100 mm, moč: 11 kW (14,96 KM), vrsta nastavitve višine: električni, Prenovljeni avtomatski tračni kalibrirni brus je namenjen kalibraciji masivnega lesa in brušenju furniranih delov. Model SANDYA 10 spada v višji razred avtomatskih tračnih brusov blagovne znamke SCM, ki je znan po izjemno togim okvirjem, vrhunski kakovosti brušenja in vsestranski uporabi. 2 agregata: valj + valj s čeveljčkom in skupnim motorjem 11 kW Kfodpfswx I Tpex Ah Aea 1. kalibracijski valj, jeklen 2. brusilni valj, mehka guma + pnevmatski brusilni čevelj Širina brušenja 1100 mm 2 hitrosti pomika podajalnega traku Samodejno merjenje debeline obdelovanca Motorizirana nastavitev delovne debeline z zaslonom + fino nastavljanje Podaljšani mizi na vhodu in izhodu Pnevmatska oscilacija Zelo dobro tehnično stanje + popolna prenova Na voljo slovenska navodila Primeren za kalibracijo in brušenje masivnega lesa in furnirja Stroj je prenovljen, nastavljen in preizkušen.

Stanje: rabljeno, Wide Belt Sander SCM Sandya 10S M2 110 Year of manufacture: 1999 Abrasive belt dimensions: 2620 x 1115 mm 380V 1st Sanding Unit Contact roller 180 mm Motor 18.5 kW 2nd Sanding Unit Combination unit with sanding pad Motor 11 kW Maximum sanding width: 1100 mm Sanding height min./max.: 4 / 170 mm Feed speed: 4.5 – 9 m/min Dimensions: 2300 x 2205 x 2500 mm, Weight: 1850 kg - Documentation available: No - CE certificate available: No - Number of units [pcs]: 2 - └ Unit 1: - Unit type: Contact roller Kfodpfxswnh A Ao Ah Aja - Roller diameter [mm]: 180 - Motor power [kW]: 18.5 - └ Unit 2: - Unit type: Combination - Belt length [mm]: 2620 - Belt width [mm]: 1115 - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 Financial Information VAT: The stated price is plus VAT VAT/tax margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items in the industrial sector Yorick Diebels