Separator Zig Zag

Zlomiarze Recycling Technology

Stanje: rabljeno, Stiskalnice za pelete Proizvajalec: Bühler Gtsdpfxsw Iy T So Afqot Model: RPWPR 900.138 EX 4 stiskalnice - Bühler 3-4 tone na uro 4 mešalniki 4 polžasti podajalniki 20 m dolg nerjavni verižni transporter 16 m dolg izhodni transporter Mehki zagoni (soft starterji)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Gedpfxevwlqqj Afqjtt Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2024, Stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Gtedpsff Sbijfx Afqst Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Leto izdelave: 2025, Stanje: novo, The LITech hammer mills HM 120 / 200 / 300 / 400 are ideally suited for the pre-crushing of medium-hard, tough, and brittle materials such as soils, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals, and many more! Gedpfx Afog Ay Dheqjtt

Stanje: pripravljen za uporabo (rabljen), Čeljustni drobilnik Kleemann Znamka: Kleemann Gtedeu S Tqvopfx Afqst Tip: SSTR 1250 Vhodna odprtina: 1250 x 950 mm Vključuje: Elektromotor Teža pribl. 38 ton

Leto izdelave: 2024, Stanje: skoraj kot novo (rabljeno), Due to a process change, the following is being offered for sale: Compact, semi-stationary, electrically driven trommel screen for screening excavated material, soil, stones, construction debris, or other screenable materials! Type: GREMAC eZero Year of manufacture: 2024 Location: North Rhine-Westphalia Operating hours: approx. 200 h Available from: short notice, by arrangement Drive: Electric motors, alternatively via generator (petrol/diesel) Supply voltage: 380 - 420 V / CEE 16A Drum length: 2,000 mm Drum diameter: 1,000 mm Screening area: 6.2 m² Hopper capacity: 1.3 m³ Weight: 1,500 kg Mesh size: 20 mm² Screening technology made in Germany. The GREMAC eZero impresses with a hot-dip galvanized frame and high-quality materials, ensuring a long machine life. Godov Iyx Rspfx Afqott Condition of the machine: - as new - very well maintained The machine is sold in the condition existing at the time of handover. The seller accepts no liability for defects. Subject to prior sale and technical modifications. All information without guarantee.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Baling Press is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing used tires and car bumpers to a minimum volume. The baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for medium to high material throughput. By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the materials to the recycling cycle. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1,600 kg Transport height: 2,300 mm Feed opening: 1200 W x 680 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Gtedpfx Afjvug Dyeqst Special features: - Extra-long double cylinders for even and early compression of material - User-friendly lever operation - Bale ejector for easy removal of finished bales - Additional retention claws to minimize material spring-back - Fixture for 4 rolls of strapping - High-quality product "Made in Europe" Suitable for compacting: - PET bottles - Food cans and tin containers - Plastic canisters and plastic packaging - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Additional options: - Annual maintenance with UVV inspection - Machine color according to RAL - PLC control with automatic pressing cycle, bale-ready indicator and E-stop with key - Vertical door - Strapping bands / strapping wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baling Press. Can press, can baling press, PET baler, PET press, used tire press, tire baling press, tire press, can press, baling press, paper press, waste paper press, cardboard press, carton press, film press, paper baler, waste baling press, waste press, recyclable press, waste compactor, waste press, residual waste compactor.

Stanje: generalkompletno obnovljen (rabljeno), skupna masa: 3.200 kg, Manufacturer: Kleemann, Model: SSTR 400 Jaw opening: 400 x 250 mm Throughput: 4–10 m³/h Gap width: 20–70 mm Gtjdpfx Aoq Ttmfofqjt Weight: approx. 3,200 kg Power requirement: 15 kW Workshop overhauled

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Allgaier Screening Machine | Flat Screen Type ARSM 33-10 overhauled (workshop-refurbished) - Manufacturer: Allgaier Gtodoq Iivaepfx Afqst - Type: ARSM 33-10 - Year of manufacture: 2005 - Condition: overhauled - Screening capacity: up to approx. 200 - 220 srm/h (with wood chips and sawdust) - Screening area: 10.0 m² x 2 = 20 m² per mesh size - Fractions: 3 - Screen decks: 4 units + 1 intermediate floor - Drive power: 7.5 kW - Dimensions (L x W x H): 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 reseda green - Screen inserts selectable - Outlet layout according to customer requirements Screening machine overhauled. Pendulum roller bearings and suspension struts are new. Suitable, among others, for screening the following bulk materials: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Oscillating screen machine | Stationary screen | Flat screen | Plansifter | Oscillating screener | Roll sifter | Screening machine for wood chips

Stanje: dober (rabljeno), Used radial drill SASS Mod. TRM 2200 Excellent condition, fully operational. Gtjdjikqz Sjpfx Afqet Supplied with cube block. Maximum drilling diameter in solid cast iron: 20-22, 100 mm Maximum drilling diameter in solid steel (R=60): 80 mm Spindle diameter (sliding quill): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor (rpm): 18–1600 Automatic feed Maximum swing (distance from column surface to spindle axis): 2230 mm Drilling radius (min – max): 660–2505 mm Head travel on arm: 1845 mm Vertical arm travel: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Base plate height: 260 mm Base table dimensions: 2490 x 1230 mm Spindle motor power: 11 HP Weight: 9000 kg