2024 F200 DS - Odstranjevanje žlindre

Q-Fin Quality Finishing Solutions F200 XLDS - MAG

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated with oil up to 130°C Upper pressing force: 57 t Side pressing force: 9 t Dcjdpfx Absv Nhx Uegsi Year of manufacture: 2001 CE certificate

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Dsdpfxefx Hv Hs Abgjci Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Dedet Hw Shopfx Abgsci Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2025, premer struženja nad prečnim suportom: 250 mm, stružna dolžina: 730 mm, premer struženja: 500 mm, največja hitrost vretena: 1.800 obr/min, CNC stružnica CK 6150 s plosko posteljo Ponujamo novo CNC stružnico, model CK6150. Ta stroj uporabljamo tudi v lastni proizvodnji, zato si ga lahko pred naročilom ogledate v delovanju. Stružnica CK 6150 ima plosko posteljo in kaljene vodila, kar zagotavlja dolgo življenjsko dobo stroja. Stroj je standardno opremljen s CNC krmilnim sistemom GSK. Po želji lahko namestimo tudi Fanuc ali Siemens CNC sistem. Glede na zahteve kupca je možno montirati revolversko glavo za 4, 6 ali 8 orodij. Stroj je možno opremiti s hidravličnim vpenjalom, kar bistveno poenostavi nameščanje obdelovancev, ter z hidravličnim konjičkom. CK 6150 je lahko dodatno opremljen z nosilnim ogrodjem za natančnejšo obdelavo dolgih kosov. Tehnične specifikacije: Model: CK 6150 x 1000 Največji premer obdelovanca nad posteljo: 500 mm Največji premer obdelovanca nad suportom: 250 mm Največja dolžina obdelovanca: 1000 mm Največja dolžina struženja: 730 mm Premer vretena: 82 mm Hitrost vretena: 150–1800 min⁻¹ Moč glavnega motorja: 7,5 kW Mehanska glava (hidravlična opcijsko) Premer vpenjala: 250 mm 4-pozicijska orodna glava (6 ali 8 pozicij opcijsko) Dcjdpoxdmgvofx Abgei Največja velikost orodja: 25x25 mm Teža stroja: 2700 kg Dimenzije stroja: 2650 × 1700 × 1820 mm Dobavimo lahko tudi druge modele stružnic serije CK: CK 6140 – delovna dolžina: 550/750 mm CK 6150 – delovna dolžina: 1000/1500/2000 mm CK 6160 – delovna dolžina: 1000/1500/2000 mm CK 6152E – delovna dolžina: 1000/1500/2000/3000 mm CK 6165E – delovna dolžina: 1000/1500/2000/3000 mm CK 6185E – delovna dolžina: 1000/1500/2000/3000/4000 mm CK 61100E – delovna dolžina: 1000/1500/2000/3000 mm CK 61125E – delovna dolžina: 1000/1500/2000/3000 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: električni, proizvajalec krmilnikov: Bodor, vrsta laserja: vlakenski laser, Vstopni model ploščatega vlakenskega laserja za rezanje kovin Nizki stroški laserskega rezanja in enostavna uporaba Modularna miza za rezalni stroj z ojačitvami prihrani čas pri razstavljanju ter izboljša priročnost in togost. Posebna šoba za vlakenski laser in rezalni proces omogočata hitrejše rezanje ogljikovega jekla s kisikom, varčnejše rezanje nerjavečega jekla z dušikom pri nizkem pritisku ter boljšo kakovost rezanja ogljikovega jekla z zrakom. Vlakenske laserske glave zaznavajo izbokline in s tem učinkovito zmanjšujejo stopnjo poškodb ter znižujejo stroške vzdrževanja laserskega rezalnika. Uporabni material: kovina Stanje: novo Tip laserja: vlakenski laser Moč laserja: 1000W, 1500W, 2000W, 3000W Delovno območje: 4000*1524 mm Hitrost rezanja: 0–100 m/min Natančnost pozicioniranja: ±0,05 mm Ponavljajoča natančnost pozicioniranja: ±0,03 mm Podprti grafični formati: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC: da Način hlajenja: vodno hlajenje Dedpfx Abjhv U Swjgsci

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction Dsdpfehua Dqjx Abgsci

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), This KEYENCE IM-8020 optical measuring machine was manufactured in 2023. It features a comprehensive set of components, including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and probe inserts. Consider the opportunity to purchase this KEYENCE IM-8020 optical measuring machine. Contact us for more information. Additional Information • Measuring head with 200 × 200 mm measuring field • Multi-angle lighting with light barrier • Digital measuring projector • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) • Glass plates • Software • Clamping device • Glass scale • Barcode scanner • Lighting • Stylus Dedpox D Dl Nefx Abgoci Optional accessories: • Probe tip sets: 80 pieces, range 0.3–0.99 mm • Probe tip sets with handles: 350 pieces, range 0.4–4 mm • Dial gauge sets: 800 pieces, range 4–12 mm • Limit plug gauges: 265 pieces, range 1–43 mm • Setting rings: 50 pieces, range 0.6–47 mm • Thread plug gauges: 170 pieces, range M1–M24 and several imperial threads • Thread ring gauges: 265 pieces, range M1–M63 and several imperial threads • Micrometers: 70 pieces, range 0–150 mm (analog and digital) Optional: Extensive package of measuring instruments

Stanje: kot nova (razstavni stroj), obratovalne ure: 170 h,

Stanje: novo, številka stroja/vozila: 246203 xxxx, Funkcionalnost: popolnoma funkcionalen, Model-making portal milling machine – Ideal base for building CNC machines and applications. The FB2 flat-bed unit is excellently suited for entry into CNC technology and is perfect for model making and hobby use. The FB2 is also often utilized in industry for measurement and dosing technology, as it offers extensive expansion options. Access to the isel modular system is also available with this unit. Various sizes with travel ranges from 530 x 500 mm up to 1030 x 1250 mm, as well as options like machine base and enclosure, are available and can be individually configured. IDEALLY SUITED FOR: • Optimal for laboratory, model-making, and workshop applications • Assembly and mounting • Printing and engraving • Drilling and milling • Dispensing and screwing • Shaping and modeling • Gluing and potting Dedohqmamspfx Abgsci • Soldering and welding • Measuring and testing • Sawing and cutting, etc. Z-clearance = 190 mm (Z-clearance = 300 and 500 mm available on request!) FEATURES: • Durable 200W class stepper motors • Drive systems equipped with robust LES units with steel ball screw spindles • Workpiece clamping via T-slot table • Available with or without safety enclosure • Adjustable portal clearances according to customer application OPTIONS: • iFM or UFM spindle motor • Coolant spray system • Cool-Min cold air cooling • Automatic tool length measurement • Rotary axes • Workpiece clamping systems (toggle clamps, vacuum tables, etc.) • Extraction systems • LED machine area lighting • Choice of RAL color finish • CAD/CAM software • Z-clearances of 190 mm, 300 mm, or 500 mm • High-performance 4-axis motion controller • Machine base frame • Enclosure with sliding/folding door

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Dcsdefxpbmepfx Abgji