Kundig Širokopasovni Brusilnik, Ravna Površina nakup rabljenega (3.381)

Stanje: rabljeno, Delovna širina pribl. 1.300 mm Število brusnih enot: 2 kos Maksimalna debelina obdelovanca: pribl. 150 mm Iodpfxeypwaro Al Neia Motor: 18,5 & 15 kW Širokopasovni brusilni stroj Kündig tip ENORM 1300-2 za natančno umerjanje in fino brušenje masivnega lesa, furnirja in lesnih materialov. Robustna industrijska izvedba z dvema brusnima enotama in čistilno krtačo omogoča visoko odstranitev materiala in natančno kakovost površine v pohištveni in notranji opremi. Idealno za obrtna in industrijska podjetja z visokimi zahtevami glede kakovosti, vključno s kompletom brusnih trakov.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 3.551 h, skupna širina: 1.790 mm, skupna višina: 2.150 mm, skupna masa: 2.300 kg, največja dolžina izdelka: 1.690 mm, This Kundig Premium-2 1350-RG wide belt sander was manufactured in 2018. It is equipped with a steel roller and a rubber roller, complemented by a belt discharge system. The accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Take this opportunity to purchase this Kundig Premium-2 1350-RG wide belt sander. Please contact us for more information about this machine. Additional Equipment • Steel roller • Rubber roller with attachment for needle roller (unused) • Belt release system Machine Advantages Technical advantages of the machine • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity not specified) • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Maximum current consumption RP/RE: 36 A • Maximum current consumption RE-L: 56 A • Required minimum slow-blow fuse RP/RE: 40 A • Required minimum slow-blow fuse RE-L: 63 A • Cable cross-section, reduced load RP/RE: 5x6 mm² • Cable cross-section, reduced load RE-L: 5x10 mm² • Cable cross-section, proper sizing RP/RE: 5x6 mm² • Cable cross-section, proper sizing RE-L: 5x10 mm² • Extraction port for 1st unit RP/RE: 180 mm diameter • Extraction port for 1st unit RE-L: 180 mm diameter • Extraction port for 2nd unit RE-L: 180 mm diameter • Extraction port for belt cleaning RE-L: 150 mm diameter • Required total extraction port diameter RP/RE: 200 mm • Required total extraction port diameter RE-L: 300 mm • Airspeed at extraction outlets RP/RE: 22 m/s • Total airflow for dust extraction RP/RE: 2000 m³/h • Total airflow for extraction RE-L: 5400 m³/h • Negative pressure RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for belt or workpiece blowing per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Maximum workpiece width RP/RE: 1350 mm • Minimum workpiece thickness RP/RE: 4 mm • Maximum workpiece pass-through height RP/RE: 200 mm • Working height including machine base RP/RE: 910 mm Iijdpfex D E I Esx Al Nja • Feed speed range RP/RE: 3–15 m/min • Overall length of the machine RP/RE: 1690 mm • Overall length of the machine RE-L: 1850 mm • Overall width of the machine RP/RE: 1790 mm • Machine height including base and extraction nozzle RP/RE: 1950 mm • Maximum machine height with base and extraction nozzle RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Additional information Machine still powered up

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 650 mm, Oprema: Na voljo je tipska ploščica, Kündig Botop, sanding unit above: roller, pneumatically-operated pad; sanding unit below: roller, pneumatically-operated pad. The machine has been completely overhauled: new conveyor belt and new rollers. Ijdevmt D Ropfx Al Noia

Stanje: novo, Leto izdelave: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. intermediate lacquer sanding setup Special price for demonstration unit – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Consistent working height thanks to upper section adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller of proven hardness - Infinitely variable height adjustment of contact roller per abrasive scale - Electric lifting/lowering of the contact roller according to selected unit - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubberized pressure rollers between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Pneumatic belt tensioning, tracking, and oscillation - Compressed air consumption approx. 2 l/min - Optimum safety with automatic instant stop and disc brake in case of belt break, etc. - Workpiece feed 2.2 kW with transport belt and drive roller - Vacuum device for entire worktable with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across whole working width - Over-thickness protection with immediate feed stop and lift-off mechanism Iodpfek Dpp Sjx Al Nsia - Infinitely variable chip removal adjustment - Electronic feed adjustment on control panel, stepless 3 - 15 m/min - PLC control with teach-in memory function - Pneumatic belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: Fully automated fast setup and feed activation - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 kW - Sanding belt dimension 1350 x 2000 mm Perfect - Equipment Features: - High-quality swiveling plexiglass control panel - 10" touch screen - Industrial control system - Automatic pressure regulation and memory for sanding pad elements - Electronic compensation of abrasive belt grit size - Job and operating hour counters Lacquer equipment - Infinitely variable sanding belt speed on 2nd unit - Blast nozzles for sanding belt cleaning of 2nd unit, operation-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with the machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-blow-off with fan Location: 54634 Bitburg – Immediately available –

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Brusilni agregat s kontaktnim valjem DIAGONAL agregat s segmentnimi brusilnimi blazinicami (širina segmenta 35 mm) 2 motorja z 15 in 11 kW, 400V Prehodna višina 200 mm Iisdpfox Eh Svox Al Nja Konstantna delovna višina (nastavitev zgornjega dela stroja) Dimenzija brusilnega traku 1350 x 2000 mm Samodejna nastavitev debeline ENORMATIC SPS krmiljenje z zaslonom na dotik in števcem delovnih ur Stroj v izvedbi ZA VMESNO BRUŠENJE LAKA Pnevmatsko dviganje/spuščanje kontaktnega valja Vakuumska naprava komplet z integriranim ventilatorjem Brezstopenjsko podajanje prek zaslona na dotik Brezstopenjska hitrost brusilnega traku in pihanje traku na drugem agregatu Pogonski valj brusilnih blazinic gumiran Dimenzije stroja cca 1.800 x 1.800 x 2.100 mm (DxŠxV) Teža cca 2.800 kg

Stanje: zelo dobro (rabljeno), Širokopasovni stroj 1100 mm, 2-pasni valj, brusilni čevelj, samo 3280 ur, nastavitev zgornjega dela Iedpfx Aljxbntfj Noia

Stanje: novo, Leto izdelave: 2025, Nova stroj Leto izdelave 2025 enostranski robni brusilni stroj ročno preklapljanje z brušenja masivnega lesa na furnir patentirana naprava z zložljivimi prisloni z oscilacijo brusnega traku z ročnim nagibanjem brusne enote 0–45° po lestvici Motor 2,2 kW Oscilacijski hod 5 mm Delovna miza 400 x 1100 mm Širina brusnega traku 150 mm Iiodpfxex Rv Dyo Al Nea Priključek za odsesavanje 100 mm Tlorisna površina 600 x 1080 mm Teža cca 400 kg Razpoložljivost: takoj Skladišče: Flörsheim

Stanje: novo, Leto izdelave: 2025, Kündig Edge Sanding Machine Uniq-S Edition 30 In Top Condition - Immediately Available - - Complete sanding unit tiltable up to 45 degrees motorized, without any table adjustment required - Feed system integrated into the machine frame, transport belt 50 mm wide on the bottom, pressure rollers 60 mm diameter on top, motor 0.55 kW, infinitely variable speed 3 – 15 m/min - Double-sided operation with straight and contour sanding sides - Sanding belt size: 200 x 2000 mm - Sanding belt drive motor: 3 kW, 380 V, 50 Hz - Oscillation stroke programmable 10 – 90 mm - CE compliant/Dust tested Standard configuration Kündig Uniq-S Accessories: - Q4 Auxiliary Table for Belt Drive Roller - Q6 Semi-circular Table for Belt Drive Roller - Z04 Table Extension Ijdpsvk R Arsfx Al Njia Location: Available ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Iiodefig Rwepfx Al Nsa Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2025, Edge sanding machine with top-mounted feed unit What sets the Uniq-S apart from the Uniq is its integrated feed system in the machine table, featuring a rubberized feed belt and a top pressure beam. This significantly facilitates the sanding and production of beveled and chamfered edges, as well as the serial sanding of workpieces. It is also particularly helpful when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the upper pressure beam gently convey the material. Optionally, a second, bottom conveyor belt is available. The top pressure rollers can also be replaced by a rubber belt, which is especially helpful when sanding extremely small parts. The Uniq-S is recommended as an all-rounder, capable of performing all operations – from solid wood to fine veneer edges – at a high level of quality. The continuously adjustable feed speed allows for optimal adaptation to the material being processed. 1. Sanding station: "Veneer side" 2. Sanding station: "Solid wood side" 3. Sanding station: "Auxiliary table" 4. Sanding station: "Semicircular table" Iisdpfshqb Rcex Al Nja Location: In stock at 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Features and technical specifications: - Robust, space-saving 2-belt wide-belt sander for demanding calibration and fine sanding applications - Consistent working height thanks to top-section adjustment - Working width: 1350 mm - Top sanding, with two sanding units - 1st unit equipped with grooved rubber contact roller of proven hardness - Pneumatically (program-controlled) adjustable contact roller, roller height steplessly adjustable via abrasive grit scale - 2nd unit with electronically-controlled segmented sanding pad, segment width 35 mm, featuring quick-change glide strips - Parallel spring-mounted, ground steel pressure roller at infeed - Rubber-coated pressure rollers between sanding units and at outfeed - 15 kW (20 HP) motor, 400 V/50 Hz with soft start for reduced start-up current - Motorized, finely adjustable height setting with digital display - Belt tensioning, tracking and oscillation via pneumatics, compressed air consumption approx. 4 l/min - Optimum safety via automatic instant stop with disc brake in case of belt breakage - Workpiece feed motor 0.75 kW (1.0 HP) with fabric-reinforced rubber feed belt - Complete electrical system with contactor control; automatic star-delta start for main motor, motor protection and ammeter for monitoring stock removal - Pass-through height: 200 mm - Abrasive belt size: 1350 x 2000 mm Comfort features: - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with immediate feed stop and automatic elevation of the machine top section - Infinitely adjustable stock removal - Electronic feed regulation via operator panel, continuously variable 3 – 15 m/min Isdpfx Alouhiq Ds Njia - PLC control/programming with color touch screen and TEACH-IN memory (recorded at the push of a button, according to sanding result; no manual input required) - Pneumatic belt tracking control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated fast setting and feed solution - eco*-energy-saving mode - Fault diagnostics - Job and operating hours counters Machine in E-Plus version (RE) Including foldable outfeed table extension 1350 mm, without infeed plate Location: Solingen Availability: short notice

Stanje: novo, Leto izdelave: 2023, New machine Isdpekwhxiofx Al Noia Year of manufacture: 2023 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside of our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Features and technical data: • Intermediate lacquer sanding (Cd-L) version • Robust, space-saving single-wide belt sander designed for demanding calibration and final sanding • Constant working height ensured by upper section adjustment • Working width: 1350 mm • Overhead sanding with combination unit • Complete sanding unit tiltable up to 10° • Grooved rubber contact roller with proven hardness • Infinitely adjustable contact roller height with abrasive grit scale • Pneumatic lifting/lowering of the contact roller based on aggregate selection • Sanding pad with quick-change sliding coating • Parallel spring-loaded, ground steel pressure roller at infeed • Rubber-coated pressure roller at outfeed • Belt drive motor: 11 kW (1100 mm), 15 kW (1350 mm), 18.5 kW (1600 mm), 400 V/50 Hz; soft start for low current draw on startup • Motorized, finely adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatic; compressed air consumption approx. 2 l/min • Optimum safety with automatic emergency stop via disc brake in the event of belt breakage, belt misalignment, loss of pressure, or opening of belt entry door • Workpiece feed motor 1.1 or 1.5 kW with fabric-reinforced rubber conveyor belt • Vacuum unit for work table with small parts area, integrated fan in machine base • Complete electrical system with contactor control; automatic star-delta starting of main motor, motor protection and ammeter for monitoring material removal • Maximum workpiece height: 200 mm • Belt dimensions: 1350 x 2000 mm • Automatic thickness adjustment across the entire working width • Workpiece over-thickness protection with feed emergency stop and automatic lifting of main unit • Stepless adjustment of material removal rate • Electronic feed control at operator panel, stepless 3 – 15 m/min • PLC control/programming with color touchscreen and TEACH-IN memory function (results saved with button press based on sanding result, no manual input required) • Pneumatic conveyor belt tracking control • Workpiece support tables at infeed and outfeed • ENORMATIC: fully automatic quick setting and feed initiation (very useful for large workpieces) • eco*-energy saving mode • Fault diagnostics • Order and operating hour counters - Electronic segmented sanding pad, segment width 22 mm (special pivoting version) - Variable sanding belt speed (programmable memory) - Air nozzles for sanding belt cleaning, operationally controlled, additional extraction port - Additional sanding shoe insert for lacquer sanding Includes swiveling air knife Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, New machine Year of manufacture: 2025 Edge sanding machine with integrated double conveyor feed system for solid wood parts, veneer edges, and curved workpieces, featuring full unit oscillation. Processing of solid and veneered edges either manually or via automatic feed. - On the veneer sanding side, material is guided along two adjustable fence plates (the infeed fence features integrated extraction slots and is finely adjustable according to a scale based on stock removal), onto an elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two return rollers), with infeed fence extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid sanding side, workpieces are sanded against the continuous, glide-coated sanding belt backing, table size 1180 x 325 mm, including miter gauge with scale. - On the front side, optionally equipped with a quickly installable semi-circular table (with extraction holes) for sanding against the rubber-coated drive roller, Ø 90 mm, resting radius 300 mm. - At the drive roller, optionally equipped with a quickly mountable cast iron auxiliary table (with extraction holes), 400 x 500 mm, mounted on an oscillating spindle for use with sanding rollers Ø 25, 30, 40, and 45 x 100 mm for external and internal curves, with protective cover for the spindle. Design: Robust machine base with heavy-duty cast-iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented design), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, programmable oscillation stroke from 10 to 90 mm, electrical cabinet integrated in frame, constant belt tension with automatic length compensation, adjustable belt tracking, touch guard plate, dust extraction via two extraction hoods, flexible hoses and a common internal pipe leading to a Ø 150 mm connection flange, recess in base for easy machine movement with pallet jack or forklift; belt width 150–200 mm, belt length 2000 mm, working height 830 mm (solid wood sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the machine base, two parallel conveyor belts underneath, spaced 250 mm apart, belts 50 mm wide, upper pressure rollers 20 mm wide, motor 0.55 kW (0.75 HP), infinitely variable speed control from 3 to 15 m/min. COMFORT version Kündig UNIQ-S Includes: Table extension UNIQ/UNIQ-S/Flash Includes: Upward extraction duct for UNIQ without shutter Iijdpfxow Tfx Dj Al Nja Includes: Semi-circular table for drive roller UNIQ-S Availability: Short term Location: Flörsheim

Stanje: novo, Leto izdelave: 2023, Exhibition machine Year of manufacture: 2023 Iisdoxvnmnspfx Al Noa Features and technical data: - Double-sided operation with surface and contact grinding side - Abrasive belt size: 200 x 2000 mm - Belt drive motor: 3 kW - Oscillation stroke programmable: 10-90 mm - Grinding unit motorized tiltable up to 45 degrees - CE-compliant / dust-tested Accessories: - Semicircular table at the belt drive roller Dimensions (LxWxH): 1800 x 1000 x 1500 mm Weight: 610 kg Location: Solingen Availability: short notice

Stanje: dober (rabljeno), Leto izdelave: 2010, • Simultaneous top and bottom sanding: with roller and pneumatic sanding shoe units • Double-sided processing of parts: in a single pass • Above-average working speed, reduced labor input, excellent surface finish Iiodpfx Alsw A R U Re Nja • Working width (mm): 1100 • Feed drive: 1.5 kW each, frequency-controlled • Height adjustment: 0.75 kW each • PLC: Omron • Vacuum: 1.5 kW • Enormatic: Automatic measurement of workpiece thickness, fully automatic adjustment and automatic start of feed and sanding process

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 815, največja hitrost vretena: 8.000 obr/min, skupna masa: 600 kg, dolžina obdelovanca med konicami: 336 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Universal dividing head centre height: 170 mm Tailstock centre height: 120 mm (with intermediate support: 170 mm) Maximum workpiece length between centres: 336 mm Workpiece diameter with cantilevered mounting: approx. 600 mm Maximum centre distance: 950 mm Internal taper of spindle: Morse 4 / Unified 40 T-slots: 12 mm (machine base) T-slots: 8 mm (other elements) Grinding stroke: 190 mm Cross travel of tool holder: 100 mm Vertical travel of grinding head: 325 mm Tool holder travel range: 230 mm Dividing apparatus on tool slide: 330 mm Grinding head holder rotation: 360° Tool holder rotation: 360° Grinding head rotation: 360° Universal unit rotation: 360° Three-phase motor: 0.7 / 0.85 kW DC motor: 1.3 kW Spindle speed: 4,000 / 8,000 rpm Infinitely variable DC speed: 2,000 – 10,000 rpm MACHINE DETAILS Iiedpfxoym Alhs Al Nja Operating voltage: 380 V Frequency: 50–60 Hz Rated current: 14 A Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,900 mm Weight: 600 kg EQUIPMENT Two-axis digital readout Extensive accessories included, compatible with the machine External reference: Segato

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4806170, širina brušenja: 1.350 mm, dolžina brusnega traku: 2.260 mm, višina obdelovanca (maks.): 160 mm, širina brusilnega traku: 1.380 mm, TEHNIČNI PODATKI Delovna širina: 1.350 mm Širina brusnega traku: 1.380 mm Dolžina brusnega traku: 2.260 mm Razpon delovne višine: 3 - 160 mm OPREMA Krmilni sistem IPC z barvnim zaslonom Shranjevanje programskih pozicij v terminalu Samodejna nastavitev vseh potrebnih procesnih parametrov v realnem času Perforirani gumijasti transportni trak za odsesavanje Isdpfx Ajyzm Sisl Njia Zunanja referenca: MNA001

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5211291, hitrost pomika os X: 16 m/min, širina brušenja: 1.350 mm, moč: 15 kW (20,39 KM), dolžina brusnega traku: 2.620 mm, višina obdelovanca (maks.): 160 mm, DÉTAILS TECHNIQUES Largeur de ponçage : 1 350 mm Longueur de la bande abrasive : 2 620 mm Épaisseur de la pièce : 3 à 160 mm Plage de vitesse d'avance : 3 - 16 m/min (en continu) Isdpoyx Et Tefx Al Noia DÉTAILS DE LA MACHINE Puissance du moteur : env. 15 kW Dimensions & Poids Dimensions (L x l x H) : 3 000 x 3 500 x 2 500 mm Poids de la machine : env. 4 300 kg ÉQUIPEMENT Unité transversale pour égrenage intermédiaire des vernis Unité combinée (rouleau + patin de ponçage) Patin de ponçage à segments électroniques pour un traitement de surface précis Brosse de finition pour une qualité de finition parfaite Unité d’ionisation pour la neutralisation des poussières Aspiration des poussières avec ventilateur à hélice pour un environnement de travail propre Commande par écran tactile pour une utilisation simple Calibrage et finition en un seul passage Grande flexibilité grâce à plusieurs unités Construction robuste pour une utilisation industrielle Idéal pour le traitement des vernis, placages et bois massif Remarque : Les données proviennent du prospectus du fabricant ou de la documentation et peuvent différer des valeurs réelles.

Stanje: rabljeno, Bütfering Classic 111 C Avtomatski širokopasovni kalibracijsko-fini brusilni stroj Konstantna delovna višina / nastavitev glave Upravljalni terminal s 50 programskimi mesti in jasnim tekstovnim prikazom Kombinirani brusilni agregat iz jeklenega kontaktnega valja in brusilnega čevlja CPS elektronsko krmiljeni segmentni brusilni čevljev agregat SPS-krmiljeno prilagajanje pritiska brušenja Delovna širina 1100 mm Glavni motor 15 kW Hitrost pomika 4 in 8 m/min Dodatna kompaktna valjčna miza na vhodu in izhodu Stroj DELAVNIŠKO OBNOVLJEN, v ODLIČNEM STANJU iz malega podjetja Na zalogi v Lieboch Iiodpfxoy A Hpde Al Nja

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Iiodpfoych Igox Al Nsa Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Iedpfxoychqze Al Nsia Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1995, Konstantni stroj - kombinirana postaja, krtača za prah - naprava za merjenje debeline - elektronska posamezna brusna čevelj MCS sistem Weber 32 mm - utorni jekleni kalibrirni valj - izpihovanje traku - vakuumska preproga. Širina brušenja: 1100 mm. Pogon: 15 kW. Podajanje ca. 1,1 kW. Nastavitev višine 0,25 kW. Dimenzije brusilnega traku: 1150 x 2500 mm. Maksimalna debelina obdelovanca: 150 mm. Širina stroja: 1700 mm. Dolžina stroja: 2000 mm. Višina stroja: 2160 + 150 mm. Teža stroja: 1900 kg. Konstantna delovna višina: 850 mm. Priklop za odsesavanje: trak 180 mm / krtača 120 mm. Količina sesalnega zraka: 0,74 m³/s. Priključna moč: 23 kW. Priključek za stisnjen zrak: 7 bar. Hitrost podajanja: 3–15 m/min. Delovnih ur: 7000 h. Lokacija skladišča: Nattheim Isdpfxox Twcpe Al Nsia

Stanje: rabljeno, Leto izdelave: 2006, Delovna širina: 1100 mm Dimenzije brusnega traku: 1120 x 1900 mm Višina: 1890 mm Dolžina: 1335 mm Višina prehoda: 3 - 150 mm Hitrost podajanja: 2,5 - 13 m/min. Zmogljivost odsesavanja: 1830 m³/h Odsesovalni priključek: 1x 180 mm Stisnjen zrak: 6 bar Pogonski motor: 15 kW Skupna priključna moč: 17 kW Teža: cca 1500 kg Lokacija skladišča: Dobavitelj Iodpfoy Dd Ndjx Al Noia

Stanje: rabljeno, Leto izdelave: 1997, vklj. 3-valjni podajalnik, motor: 2,2 kW, električna oscilacija, hitrost traku: ca. 22 m/sek, po višini nastavljiva brusilna miza, velikost mize: 1000 x 350 mm, brezstopenjsko vrtljiv brusilni agregat od 0 do 45°, kotna skala in mehanska zapora, odpiranje naprave za brušenje furnirnih robov, aluminijast brusilni čevelj, po višini nastavljiva radijska brusilna miza, centralni priključek za odsesavanje: Ø 140 mm, brusilni trak: 3000 x 150 mm. Lokacija skladišča: Dobavitelj. Ijdjy Dd Igopfx Al Njia

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, NEPTUN ROCK 11 – Letnik 2012 Ijdpjy A I Hksfx Al Njia Ravnalni brusilnik z 11 brusnimi koluti za ravne robove, Debelina: 3-40 mm Hitrost: 0,5-5 m/min. Moč: 25 kW Skupne dimenzije: 8089 x 2340 x 1450 mm Teža: 3500 kg