Robusni brusilnik za robove

Langzauner EK 3/4

Stanje: dober (rabljeno), Leto izdelave: 2017, In this offer, you are purchasing used office furniture that is in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for Sale: We also offer workstation sets for €450 each. 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo fabric, grey/black 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One material drawer - 3 steel drawers with soft-close function - Lockable, incl. key Desks: • Approx. 10x desks by FM 1600 x 800 x 680 to 760 mm (continuously height-adjustable) in light grey. Frame made of aluminium. • Approx. 10x folding tables (can be used as desks) 1600 x 800 x 720 mm on castors, in light grey. Aluminium frame. • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Aluminium frame. • Approx. 4x high desks 1600 x 800 x 1300 mm in arctic white. Frame in white, aluminium. Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests, fully adjustable. Upholstery: Polo, black, base in black plastic. • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black. Frame in silver. Bljdpfxeiiv Iko Acmsh • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue. Frame in silver. • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red. Frame in silver. Storage: • Approx. 16x mobile pedestals by FM 434 x 800 x 590 mm with one material drawer and 3 steel drawers. Carcase in light grey. Handles in aluminium. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to make you an individual offer. You can also purchase each piece of furniture individually. Condition: These are used items, which may show signs of use (minor scratches or yellowing). Packaging and Shipping: You are welcome to inspect everything during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: max. length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion tool (positioned 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue quantity Bsdpfx Acsxdl Raemolh - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimension: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feeding 1. BASE MACHINE - Sturdy steel frame construction - Axis movement in X, Y, and Z directions - Ball screw (Y and Z axis) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side stops and rear stop rail - Center stop pneumatically lowerable, manual actuation via selector switch - 6 top hold-down cylinders, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Stanje: novo, Leto izdelave: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed spindle, tilting to one side, for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment, with zero point reset for height and offset travel Electronic position and speed displays 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Bedpfxsfpb Nmj Acmelh Push-button for spindle start and stop Clockwise and counter-clockwise rotation Quick-release cutter clamping device Precision-planed grey cast iron table with rigid frame support Control panel mounted below on the rigid frame support Fence 216 with total adjustment via handwheel and LCD display, including cast fence plates and aluminium splitter plates Machine socket outlet Lockable main switch Mechanical motor brake Cutter guard and pressure device GAMMA V 1629 Curved fence 1639 Tapoa Spindle 30 mm, non-interchangeable CE compliant GS tested

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, največja višina reza: 400 mm, dolžina tračnega lista: 5.550 mm, širina tračne žage: 80 mm, dolžina mize: 800 mm, širina mize: 1.060 mm, delovna višina: 400 mm, - Italijanska izdelava - Ploščata tračna žaga za lamele - Neopremljena z barvo - Zelo dobro stanje - Rabljena žaga Žaga: - Premer koles: 800 mm - Največja širina tračnega lista: 80 mm - Največja višina reza: 400 mm - Glavni motor: 11 kW - Območje hitrosti podajanja: 2–40 m/min - Podajanje z pnevmatskim pritiskom na vodilo - Kovinski drsni vhodni valj - Dolžina tračnega lista: 5550 mm - Doseg traku – korpus: 780 mm - Vijačno napenjanje traku - Dimenzije mizne plošče: 1060 x 800 mm - Nagibna delovna miza do kota: 15° Blsdpjw H Rq Hofx Acmjh - Premer odsesovalnega nastavka: 120 mm - Sistem vlaženja žage - Nožna zavora - Lita kolesa - Zagon zvezda/trikot - Napajanje: 380 V - Dimenzije (d/š/v): 1600 x 1100 x 2400 mm - Teža: 860 kg Podajalnik: - Kovinski, zobati podajalni valj - Pet stopenj hitrosti podajanja z menjavo jermena - Višina valja: 30 mm - Motor podajanja: 0,75 kW - Pritisk

Leto izdelave: 1979, stanje: dober (rabljeno), Underslung circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, aluminium circular saw, panel sizing saw -Manufacturer: Martin, panel saw model T 70 with automatic feed -Motor power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -Max. cutting height: 140 mm at 90° / 110 mm at 45° Blodjhfufgspfx Acmoh -Mitre cut: up to 45° -Sliding table: 355 x 1500 mm -Overall dimensions: 2275/2010/H1400 mm -Weight: 1058 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NEW-14, lastna masa: 627 kg, največja dovoljena obremenitev: 2.073 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.060 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 195 / 50 R 13, največja hitrost: 100 km/h, barva: srebrn, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2026, zavore: drugo, SARIS K1 306 170 2700 2 Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading height: 66cm Gross weight: 2700kg Payload: 2073kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x 1350kg axles with brakes Low-chassis design Fully welded, hot-dip galvanised steel frame Aluminium profile side walls with tension locks Drop and removable on all sides 15mm thick, non-slip, heavy-duty phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg static load 6 noise-dampening lashing rings with 800kg tensile strength Reinforced 13" C-type tyres with steel valves M+S tyres Net/rope hooks on frame 13-pin plug Front LED marker lights Rear lights with reverse light, fog light, and triangular reflector Top frame mounted on rubber bushings Large rear tilting angle of 51 degrees Hand pump with adjustable handle OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES FROM FEBRUARY 2026 - Equipment for 100km/h speed rating (shock absorbers) - Spare wheel with holder - Without side walls (discount available) - Side wall height increase to 35cm - Black Edition (powder-coated side walls and rims in black) - Integrated loading ramps, 2800kg capacity - Electric tipping mechanism - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump for use with electric mechanism - Safety support for maintenance work with tilted body - Folding crank rear supports - Full LED lighting - Anti-theft device - Fine- or coarse-mesh net - H-frame - Mesh sides in various heights, also available fully enclosed - Extension side walls, 30cm, with tension locks Bedjghpcaopfx Acmelh - Flat tarpaulin with or without bows - High tarpaulin, 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle documents €200 net Images are for illustration purposes and may show optional, extra-cost accessories. Haven't found the right trailer yet? We stock 50-100 vehicles, always ready for immediate pickup. The workshop is open weekdays from 8:00 to 17:00 for all kinds of repairs. Axle repair specialist – also for caravans. Large selection of rental trailers. Additionally, we offer a large range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website, or stop by in person.

Stanje: pripravljen za uporabo (rabljen), Priključna moč 380V Glavni motor 7,5kW Predrezkar 0,75kW Variabilni pogon Dvojni voziček 3000mm Električna nastavitev višine in nagiba Bjdpoy Hq N Aefx Acmjlh Širina reza 1000mm CNC-krmiljena Vpenjalni sistem AKE Premer žaginega lista max. 500 mm Upravljalna plošča v višini oči Zgornja miza z možnostjo nagiba Nosilec za predloge 2-osni predrezkar Podaljšek mize 840mm Kotni prislon PQS Standard PSV z ozkim in širokim pokrovom

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with run-out function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece processing sequence, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights of 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free positions for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit chip removal: 0–2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Bodpfx Ajw I U Drscmelh - Surcharge for radius scraper unit with blow-off device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with run-out function - Surcharge for diamond tooling, height = 65 mm for jointing unit - Riepe spray device (anti-stick) at jointing unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° bend + manual gate valve mounted on the machine, D=200mm Availability: short notice Location: Hochheim

Stanje: rabljeno, Stroj za brušenje robov Gartner FLK 4 - rabljeno - Blodpfexd U Uhox Acmsh vključno z mitro vodilom ----- Tehnični podatki ----- Širina brusnega traku: 200 mm, Dolžina brusnega traku: 2.350 mm, Dimenzije delovne mize: 870 x 400 mm, Hitrosti traku: 4, Premer odsesovalnega priključka: 80 mm, Motor: 3 kW

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer’s description: For the production of individual parts, elements, and small series. Spindle configuration: One crosscut saw, one single-sided tenoning and slotting spindle, one right-side profiling spindle, one tenoning/slotting spindle, and profiling spindle suitable for stacking multiple tools, with pneumatic spindle movement. Slotting table with motor-driven table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit; manual adjustment of feed height. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for adjusting outer frame or sash measurements. Control of tool positions (longitudinal and cross machining) via rotary switch at the control panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Bledpfx Acsx Tu N Hsmsh Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 232 mm Motor: 11 kW Special equipment: Synchronised spindle ----- Pneumatically actuated forward-back motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool base diameter: 112–140 mm, Max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types, 1 type can include up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles; manufacturing options: single parts, double parts, by frame, series production, remachining. Data entry via keyboard with integrated user guidance and error diagnostics. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, feather key 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 Hardware milling unit, right: ----- For milling the hardware groove during contouring or grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch at the control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting diameter: min. 140 mm, max. 180 mm Base position below table: 10 mm Special version of hardware milling unit: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial stroke: 2 positions Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter in and above table Electric height adjustment of the feed rollers with selector switch at the control panel for 2 wood dimensions, inclu...