Dvojni Mlinček nakup rabljenega (1.015)

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/8699, Številka ponudbe: M06L/8699 Tip stroja: Dvojni prebijalni stroj Informacije: zaprt nož Proizvajalec: NATIONAL FORMAX Tip: FXH1M Leto izdelave: 1990 Razpon premerov: 5 mm Dolžina odseka: 50 mm Dolžina stebla pod glavo: 40 mm Zmogljivost - kosov/min: 450 Lokacija: Pri nas na zalogi Cgedpfxswi Svvo Af Dju

Leto izdelave: 2001, stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner, 10,500 kW, oil + gas. Year of manufacture: 2013. Cgodpfsvrkcnsx Af Dsu

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Cgjdpfet Hw Amjx Af Deu Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Pump drive 15 kW Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Csdpot Hwwdsfx Af Djgu Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons Cgsdet Hw N Hjpfx Af Dsu • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1978, Presskraft 160 t Hubzahl 40 – 120 Hub/min Blechbreite mm gesamter Leistungsbedarf 40 kW Presskraft 160 to (1.600 kN) Tischaufspannfläche 1.100 x 1.280 mm Stößelaufspannfläche 850 x 890 mm Abstand zwischen Stößelführungen 1.120 mm Abstand zwischen den Ständern (unterhalb der Führungen) 1.350 mm Hubzahl stufenlos verstellbar 40 – 120 /min Hubverstellung 30 / 68 / 114 / 160 mm Stößelverstellung motorisch 125 mm Einbauhöhe je nach Hub – ohne Aufspannplatte – 460 – 650 mm Csdpot Hwz Nsfx Af Dogu mit Aufspannplatte – 340 – 530 mm Zulässige Hubzahl in Relation zum Materialvorschub: Bei 300 mm = 40 – 60 Hübe Bei 150 mm = 120 Hübe Gesamtantriebsleistung ca. 40 kW – 500 V – 50 Hz Gewicht ca. 24.000 kg Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Typ AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, keine Grube erforderlich). Das Blechband läuft über die Abrollhaspel zum einseitigen Zangenvorschubgerät und anschließend in die Presse. • HEILBRONN Coilabwickelgerät Typ HAEMH 4000/500 S #204753 mit Coilablageplatz, von dem das Coil aufgenommen und gespannt wird. Danach Rückführung in die Ausgangsposition. Max. Coilgewicht 4.000 kg, max. Coil-Ø 1.500 mm, max. Bandbreite 500 mm. • Angebauter Richtapparat für max. Blechbreite 400 mm, Blechführung in der Breite verstellbar, Blechdicke 1 – 3 mm einstellbar. • Automatische Öl-Umlaufschmierung mit Überwachung. • Hydraulische Überlastsicherung, motorische Stößelverstellung 125 mm. • Förderband für die fertigen Pressteile, separater Schaltschrank – modernisiert 1990 –.

Stanje: rabljeno, Leto izdelave: 1965, Planscheibendurchmesser 5300 mm Umlaufdurchmesser 6300 mm Drehhöhe 2800 mm Supportverstellung 1700 mm Tischbelastung 50 t Drehzahl 0,3-14 U/min Vorschub 0,056-10 mm/U Digitalanzeige Sony Support 2 Cedpfxsyqt R Aj Af Djgu Gesamtleistungsbedarf 120 kW Maschinengewicht ca. 187 t Serien-Nr.: 11670009-05rer Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Leto izdelave: 1965, Planscheibendurchmesser 3500 mm Umlaufdurchmesser 4000 mm Drehhöhe 3150 mm Supportverstellung 1700 mm Tischbelastung 25 t Digitalanzeige Heidenhain Support 2 Gesamtleistungsbedarf 90 kW Maschinengewicht ca. 95 t Serien-Nr.: 6671024 Die technischen Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen, Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Cgsdpoyqtbuefx Af Dju Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: novo, Basic TWO – Nov Standard v Peskanju Predstavljamo SAPI Basic TWO, revolucionarni peskalni sistem, zasnovan z dvojnim kontejnerskim prostorom za maksimalno funkcionalnost in učinkovitost. Zaradi prostorne zasnove in inovativnih funkcij je ta napredna peskalna rešitev idealna za strokovnjake, ki potrebujejo več delovnega prostora, ne da bi pri tem ogrozili kakovost in zmogljivost. Idealna Rešitev za Največjo Učinkovitost Za podjetja, ki iščejo celovito, praktično in visokokakovostno rešitev za peskanje, je SAPI Basic TWO popolna izbira. S svojimi izjemnimi funkcijami in premišljeno zasnovo prinaša višjo raven produktivnosti in kakovosti v industrijo peskanja. Več kot Kontejner – Popolna Rešitev za Strokovnjake SAPI Basic TWO ponuja popolno ravnovesje med prostorom, funkcionalnostjo in napredno tehnologijo. Zaradi inovativne konstrukcije in vrhunskih komponent to ni zgolj kontejner, temveč popolnoma delujoča rešitev, ki peskanje dvigne na novo raven učinkovitosti, varnosti in produktivnosti. Ključne Značilnosti ✔ Prostorna peskalna površina & ločen tehnični prostor – Zasnova dvojnega kontejnerja omogoča veliko delovno območje, hkrati pa vključuje ločeno tehnično sobo za optimiziran delovni proces in enostaven dostop do opreme. ✔ Enostavna namestitev in takojšnja uporaba (Plug & Play) – SAPI Basic TWO je zasnovan za minimalno nastavitev, kar omogoča hitro začetek peskanja. ✔ Izboljšana kakovost zraka – Opremljen s SAPI Air Filter, kontejner zagotavlja čistejše in bolj zdravo delovno okolje z učinkovitim nadzorom prašnih delcev v zraku. ✔ Dvojni način čiščenja s 5kW vakuumskim turbo sistemom – Učinkovito vračanje in čiščenje abraziva z dvema načinoma delovanja za maksimalno prilagodljivost in nadzor med delovanjem. ✔ Vzdržljive gumirane notranje stene – Notranje stene so prevlečene z robustno gumo, kar jih ščiti pred intenzivnim peskanjem in podaljšuje življenjsko dobo sistema. Cgedpfxeupzt Uo Af Dsu ✔ Močna LED osvetlitev – Tri visoko zmogljive LED svetilke so strateško nameščene za optimalno vidljivost, kar povečuje natančnost in varnost med peskanjem. ✔ 200L peskalni sistem z ciklonskim čiščenjem – Zmogljiv 200-litrski sistem omogoča neprekinjeno in učinkovito peskanje, medtem ko vgrajeni ciklonski čistilni sistem izboljša kakovost abraziva, zmanjša odpadke in poveča produktivnost. Dimenzije Peskalne Kabine ✔ Globina: 4,40 m ✔ Skupna širina: 2,25 m ✔ Skupna višina: 2,65 m

Stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Tacchella Macchine grinding machine type 40LR in very good condition. Specifications: Longitudinal travel X-axis: 400 mm Cedpfxsivg E Hs Af Djgu Cross travel Y-axis: 250 mm Clearance between worktable and spindle axis: 375 mm Wheel speed: 3000/6000 rpm Wheel dimensions: 150x20 mm Weight: 800 kg

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: 960816, Used horizontal bead mill WAB Dyno-Mill model KD 6 (6). The stainless steel grinding chamber is jacketed and has a capacity of approx. 6 litres, with a maximum chamber pressure of 2 bar at a maximum temperature of 80°C. The jacket has a maximum pressure of 8 bar and a minimum cooling water temperature of -20°C. The shaft is fitted with (6) polyurethane grinding discs and is belt-driven by an EExe eII T3 10 kW, 1465 rpm, 50 Hz electric motor. Peripheral disc speed is 10 m/s. The shaft is sealed with a mechanical seal. Media (bead) separation by slot screen. The unit includes an integrated control panel and power distribution cabinet with power components. Codoun S S Espfx Af Djgu

Leto izdelave: 2012, stanje: rabljeno, Used double-cone vacuum dryer, manufactured by Pharmix (CZ), model HHR1200. Product-contact parts are made of acid-resistant stainless steel (AISI 316L). The total chamber capacity is approximately 1,200 liters. The drying chamber is designed for operation at pressures from -1 to 0 bar and temperatures up to 60°C. The chamber is jacketed with an external heating shell made of stainless steel (AISI 304). The heating jacket has a capacity of 260 liters and is rated for operation at pressures up to 3 bar and temperatures up to 70°C. The chamber is equipped with an internal stainless steel vacuum extraction pipe. The feed port has a bolted lid, and the bottom discharge features a manually operated valve. The drive is by gearbox with 2.2 kW electric motor, 1420 rpm, 400 V, 50 Hz. Operational drum speed up to 2.2 rpm. The gearbox is explosion-proof – Ex II 2D c up to 125°C, the motor – II2 D Ex tD A21 T 120°C. The chamber is mounted on a carbon steel support frame. Overall dimensions at installation site: L 4015 mm x W 3975 mm x H 3300 mm (including stairs); weight 3,430 kg. The machine is currently dismantled. Photos were taken at the installation site. Cgodpfx Aelc Dv Uef Dsu

Stanje: rabljeno, Leto izdelave: 1990, Technical Details: Codpfx Afovnmnrs Degu Automatic slide feed: 0.0025 - 0.05 mm Total power requirement: 100 kW Grinding spindle slide travel: 150 mm Approx. machine weight: 17 t Grinding spindle drive: 2 x 37 kW Grinding width: 30 - 150 mm Peripheral speed: 34 m/sec Workpiece speed: 60 - 300 mm/sec Grinding height: 70 mm Grinding wheel diameter: 750 mm Grinding tool: 750 x 75 x 350 mm Grinding wheel speed: 870 rpm Maximum workpiece diameter: 250 mm

Stanje: rabljeno, Leto izdelave: 1990, Premer struženja 2400 mm Premer planske plošče 2200 mm Višina struženja 2100 mm Krmiljenje SIEMENS Sinumerik 850T Cjdpfeygx D Hex Af Dsgu Teža obdelovanca 17 t Maksimalne dimenzije orodij: 32 orodij

Stanje: zelo dobro (rabljeno), Model 50 KM za kapaciteto od 3000 do 5000 kg na uro. V zelo dobrem stanju. Fotografije prikazujejo stroj pred čiščenjem. Cgjdpfxoyw A Hno Af Dsu

Stanje: rabljeno, Model 110 kW / 150 KM. Stroj je bil predhodno obnovljen. Odličen za mletje celih zamrznjenih blokov itd. Cgodpfx Aoywpcisf Deu

Stanje: rabljeno, Leto izdelave: 1995, številka stroja/vozila: UWIIA/3472/95, Grinding diameter - max.: 300 mm Grinding length: 400 mm Workpiece length: 520 mm Center height: 150 mm Table stroke: 550 mm Infinitely variable table speed: 0.005 – 5.0 m/min Cedecxxrfjpfx Af Dsgu Distance between centers: 350 mm Grinding spindle speed, 4 steps: 250/3750/5000/7500 rpm Max. grinding wheel diameter: 250 mm Swiveling grinding spindle head: 11–60° Spindle motor power: max. 3.0 kW Total power requirement: 7.7 kW Universal CNC tool grinding machine with SIEMENS 810 G3 control, 4 axes, with electronic handwheel and spindle pitch correction, equipped with FORKART OVERZ-BR hydraulic collet chuck, coolant system, automatic central lubrication, enclosure with movable viewing window at the operator station, separate control cabinet, safety emergency stop at the control cabinet, machine lamp, SIEMENS servo drives, in very good condition.

Stanje: rabljeno, številka stroja/vozila: 52 / 519, Spindle diameter: 90 mm X-travel: 700 mm Column distance: 900 mm Csdpfxsh Ra Sts Af Degu Size of the movable long table: 770 x 900 mm Table longitudinal travel (X-axis): 700 mm Y-travel: 500 mm Z-travel: 1100 mm Feed range - table: 15 - 280 mm/min Rapid traverse Z-axis: 530 m/min Spindle bore diameter / taper: MT4 (Morse) mm Maximum spindle bore diameter: 230 mm Maximum spindle stroke: 170 mm Spindle speed, lower range: 10 rpm Spindle speed, upper range: 2000 rpm Vertical feeds of the spindle head: 0.02 - 0.2 mm/rev Feed steps: 6 Main spindle drive power: 3 kW Total power requirement: 4.2 kW Approx. machine weight: 4 t Approx. space required: 1.9 x 2.2 x 2.4 m

Stanje: rabljeno, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first and second machine in a squaring and edge banding line. Numerical control with Sintra software. Machine suitable for the 1st and 2nd pass of the panel. Motorized mobile shoulder opening by CNC, 3000 mm. Panel height: 60 mm. PVC/ABS up to 3 mm. Infinitely variable feed speed via CNC (up to 40 m/min). Electronically adjustable working height via CNC (up to 60 mm). Electronically adjustable mobile shoulder opening via CNC. Motorized rubber belt with increased pressure. Support rail with covered pins – spacing between pins: 500 mm. Automatic system for supporting large panels. Anti-adhesive unit. Squaring section, consisting of (per side): * Automatic, time-controlled anti-splintering unit * Double scoring unit * Double-motor trimming unit Cgjdpfx Afou Rim Ho Deu Edgebanding section, consisting of (per side): * Gluing unit for EVA hot-melt glue with premelter * Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC * 6-position coil magazine with automatic edge changeover via CNC * Trimming unit with 2 motors and automatic tilting * Overlapping trimming group with 2 motors * Copying unit with 2 electronically adjustable tilting motors via CNC * Multifunction contour unit with 4 motors (trimming + contouring) with automatic numerical control * Milling unit (with 2 motors on fixed left side / 1 motor with 0-90° tilting on mobile right side) * Edge scraper unit electronically controlled via CNC * Glue scraper unit * Oscillating brush unit * Hot air blower unit

Stanje: rabljeno, Double pick-up, feed-in system. Designed for production lines for drilling, squaring, edge trimming, planing, routing, sanding, and lacquering without operator supervision. Fully automatic—no need for manual adjustments during the manufacturing process. Cgjdeqvt Ecjpfx Af Dsu Working dimensions: - Maximum length: 3000 mm - Maximum width: 1300 mm - Automatic double-station panel unloading system - Throughput: 13-minute cycles - Panel gripping system via motorised arm with suction cups and vacuum drive system TECHNICAL DETAILS SUBJECT TO VERIFICATION

Stanje: rabljeno, Automatic double cell loader without pit for use in an edging line Cgedpfx Afsrzhfhe Dju Motorized panel infeed transfer Double automatic panel loading station Suction cup system for panel handling Panel remover Panels can also be processed in double rows Usable panel width: 1300 mm Usable panel length: 3200 mm Vacuum pump Motorized transfers for loading panel stacks Motorized adjustment via automatic numeric control of horizontal suction cup support bars Programming and control system

Stanje: zelo dobro (rabljeno), Molteni MS.15 pearl mill Explosion-proof design Grinding chamber: 15 l Additional grinding chamber Cgodpoiu H Ucefx Af Dou Double-walled jacket Power: 17.5 kW Very good, ready-to-use condition, directly from production!

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Cgedpfxswhmdfj Af Dsu Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°