Stroj za koordinatno vrtanje - dvojni stolpec

HAUSER M 5

Stanje: rabljeno, Spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Heidenhain control Drilling capacity in steel 40 mm Spindle taper MK 4 Quill stroke 170 mm Infinitely variable spindle speeds 10-2,000 rpm Max. boring diameter 230 mm Table dimensions 900 x 770 mm Vertical travel of crossbeam 630 mm Drilling spindle 6 pcs / 0.02-0.20 rpm Clearance between columns 900 mm Clearance between spindle and table 815 mm Spindle motor 4 HP Total power requirement 380 V Machine weight approx. 3.9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Cgodpfxoxwzg Re Ahxst Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Changes and errors in technical data and specifications as well as prior sale reserved!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Cedpfew Hg Nlox Ahxsgt Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Well-equipped ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical data and equipment specifications. A detailed technical data sheet and further information regarding the equipment are available on request.

Stanje: zelo dobro (rabljeno), Indexing Head Walter Type UPA 125 N (28487) Direct and indirect dividing Centre height 125 mm Cgsdpfx Ahjtrnndoxet Usable in both horizontal and vertical position Spindle taper MK 4 KKG 3 Travel spindle SPH 125 mm Mounting MK 2 Total transport weight 62 kg Indexing head 48 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, 100,000-liter tank, used, double-walled, in good condition, immediately ready for use, cleaned – certificate from certified specialist company available. Length: 15.74 m Diameter: 2.90 m Height: 3.10 m (transport height) - Access ladder - Platform with guardrail - Welded saddle supports - Ventilation Cgjdpfouzvyuex Ahxjt - Overfill prevention device - Dipstick - Leak detector Loading and transport can be arranged. Only serious and legitimate inquiries will be answered. Please provide your name, email address, and phone number.

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Csdpfeuyk N Isx Ahxegt

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: Cgedpfxsrqwbij Ahxet ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 620 h, Pomiki X/Y/Z: 1630mm/860mm/760mm, hitrost vrtenja: 8000obr/min, navor: 142Nm, moč: 15kW, število orodnih mest: 40, maksimalni premer orodja: 75mm/127mm, maksimalna dolžina orodja: 300mm, maksimalna masa orodja: 10kg, mere mize X/Y: 1680mm/890mm, maksimalna obremenitev mize: 2700kg. Dimenzije stroja X/Y/Z: pribl. 6400mm/4400mm/3300mm, teža: pribl. 14500kg, krmiljenje: Hurco Ultimax 4, delovni čas: pribl. 621h. Dokumentacija na voljo. Ogled na lokaciji možen. Predvidoma na voljo od sredine 2026. Cjdpfxsw Dfhzs Ahxjgt

Leto izdelave: 2025, stanje: novo, Ultrazvočna kad UEC 300 je industrijska rešitev za čiščenje velikih in težkih delov, ki so močno umazani. Naprava je opremljena s pnevmatskim dvigalom s kapaciteto do 200 kg. Delovna frekvenca znaša 28 kHz s sweep tehnologijo. Stroj obsega glavno ultrazvočno kad s tremi stranskimi ultrazvočnimi piezo pretvorniki ter dodatno nadglavno kad z oljnim separatorjem. Upravljanje poteka preko visokokakovostnega HMI zaslona na dotik z 3D prikazi obvestil. Celotna kad je izdelana iz kislinsko odpornega nerjavečega jekla AISI304 s debelino 2 mm. Tehnične lastnosti: Dimenzije platforme: 900x570 mm Največja nosilnost: 200 kg Uporabna višina: 400 mm Ultrazvočna moč: 3 kW (6 kW p-p) Ultrazvočna frekvenca: 28 kHz s sweep funkcijo Moč grelca: 9 kW OPREMA: 7" zaslon na dotik z 3D obvestili Avtomatski sistem za polnjenje vode Avtomatski način delovanja dvigala Senzor nivoja tekočine Senzorji položaja dvigala Cjdpfxsgd Uife Ahxogt Senzor pokrova Garancija: 2 leti NA ZALOGI IMAMO TUDI DRUGE MODELE

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm CNC control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X: 260 mm Travel - Y: 100 (±50) mm Travel - Z: 795 mm Rapid traverse - longitudinal/planar: 30 / 30 m/min Rapid traverse B-axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4,000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar capacity: 80 mm Spindle 2 speed: 4,500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Speed of driven tools: 10,000 rpm Power of driven tools: 3.7/5.5/5.5 kW Torque of driven tools: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar loader interface Parts catcher spindle 1 and spindle 2 Cgedpjyxpv Sofx Ahxot Piece counter and total counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Belt conveyor for part removal Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Tool presetting device spindle 1 & 2 Coolant shower 1m short bar magazine IRCO High-performance precision turning center with Y-axis and sub-spindle. Outstanding for machining complex turned parts with off-center milling operations. Easy machine programming via CELOS-MAPPS 4 conversational control. Machine under power and can be demonstrated in operation (cutting under load). Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 2.600 mm, teža obdelovanca (maks.): 35.000 kg, dolžina brušenja: 12.000 mm, razdalja med stojali: 2.800 mm, višina brušenja: 1.600 mm, Portalski brusilni stroj 12x2,6 m Znamka: GIORIA Leto: 2000 Krmilnik: Siemens 840C (dvojna upravljalna plošča z HPU) Miza: 12.500 x 2.600 mm Codpfx Ajwql H Djhxsgt Višina pomika: 1.600 mm Hidrostatistična miza, vključno z brusnim diskom itd.