Ravnalna stiskalnica - dvojni stolpec

JENNY RZ- 205-3-600

Press force 3 t
Outreach 0 mm
Stroke 200 mm
Total power requirement 15 kW
Machine weight approx. 4 t
Space requirement approx. m
JENNY - Switzerland, Automatic Double-Column Straightening Press
Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596
_____

Press force of upper ram 3 t
Ram stroke approx. 200 mm
Max. installation height 500 mm
Max. clamping length of workpiece 600 mm
Height of center above table approx. 210 mm

Ram feed rate down 0.17 mm/sec
Ram feed rate up 0.02 - 0.17 mm/sec

Pump drive 15 kW
Total drive power approx. 20 kW - 380 V - 50 Hz
Weight approx. 4,000 kg

Accessories / Special Equipment:

Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated.
Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide.
2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc.
Workpiece rotation via stepper motor from 10 to 100 rpm.
2 workpiece supports (prisms) on left and right for placing the workpiece.
The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device.
Fpsdst Hw Amspfx Ah Djn
Stroke control for pre-set ram stroke.
Left tailstock powered.
Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.