Jenny Ravnalna Stiskalnica - Dvojni Stolpec nakup rabljenega (3.815)

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Cedpfx Aet Hw Amjf Dogu Pump drive 15 kW Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Csdpfst Hwwdex Af Dogu Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: novo, Press force 300 t Working speed 3-8 mm/sec Stroke 500 mm Return speed 15 mm/sec Table size 3000 x 1500 mm Tank capacity 45 l Travel path x / y 2600 x 1000 mm Clearance 500 mm Total power requirement 18.5 kW Machine weight approx. 18 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely milled with CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump from Bosch Rexroth - Hydrapack or Badeston hydraulic valve - Hydraulic block according to EN standards - Hydraulic oil tank (xxx liters) - Pressure adjustment via pressure transmitter/controller ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged Cedovxw Hmepfx Af Dogu - All electrical components by Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive and EN ISO 16092-01 ,16092-03 - Two-hand control operation - Reset and emergency stop button - Safety cable with switch around the press 4. TRANSPORT AND INSTALLATION - The price includes transport costs, installation, and training at the customer’s plant. - Hydraulic oil is not included in the price. - All handling costs (such as crane, forklift, etc.) are borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer’s warranty. - This warranty includes the delivery of all spare parts required for repairs and service calls to the machine. Damaged parts must be returned to the manufacturer after replacement. - This warranty does not cover parts damaged by improper use.

Stanje: rabljeno, Pressure: 160 t Distance between uprights: ____ mm Stroke: 200 mm Table area: 2040 x 840 mm Throat depth: 450 mm Strokes per minute: 30 - 55 spm Installation height: 450 mm Ram area: 1700 x 800 mm Ram adjustment: 100 mm Total power requirement: 11 kW Machine weight approx. 21.1 t Space requirements approx. 2.2 x 1.94 x H 3.66 m Cgedetqm Dgepfx Af Dou - Safe for manual loading operations - Conversion to West system - Light curtain

Stanje: rabljeno, Technical details: Table diameter: 4500 mm Faceplate diameter: 4500 mm Operating hours: 0 h Swing diameter: 5000 mm Turning diameter: 5000 mm Workpiece height – max.: 2500 mm Control: Sinumerik 840D SL X-axis: 300 mm ram stroke X-axis: 2850 mm ram travel X-axis: 2850 mm working (without tool) X-axis: 5000 mm with tool changer W-axis: 1800 mm cross-rail travel Tool holders/positions: 12 Tool interface: HSK 100 (spindle) Workpiece weight: 100 t Table speed: 1–50 rpm T-slots: 8 pcs (36 H12) Ram speed – milling: 4000 rpm Rapid traverse in X and Z: 8000 mm/min Torque – milling: 100,000 Nm Torque – turning: 200,000 Nm Total power requirement: 80 (2x40) kW Cjdpju Ix H Defx Af Degu Machine weight approx.: 140 t Machine dimensions LxWxH approx.: 11.5 x 6.6 x 8.4 m NEW CNC vertical turning lathe – machine will be built upon official order and down payment. Photos displayed show a newly built machine of this model that we delivered to a customer. (Images for illustration purposes) Manufacturing applications: Turning operations such as external longitudinal turning, internal and external face turning, and profile machining. Grooving operations both internal and external. Drilling, including short and deep-hole drilling. Milling, such as face, corner, profile, and T-slot milling. Thread cutting. Also suitable for roughing and end-machining operations. The machine bed, designed as a welded construction, absorbs extreme cutting forces. The table is made from high-strength Meehanite cast iron. To withstand heavy loads, the workpiece weight is supported by two high-precision tapered roller bearings. Additionally, the table is equipped with hydrodynamic support for the workpiece. Other features: automatic tool changer 8-jaw power chuck (with power clamping spindle and hardened jaws) incl. 40 bar coolant system with filter unit Hydraulic and lubrication system by ATOS and Dropsa with Heidenhain axis measuring system Renishaw NEW – with warranty & service from WMW AG

Stanje: rabljeno, Leto izdelave: 1990, Technical details: Cgedpfx Aju Icxqof Dju Pressure: 63 t Upright clearance: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 (W x L) mm Ram area: 650 x 450 mm Control: Wanske Tronicpress CNC Upright passage: 550 x 540 mm Tank: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with vibration-damping feet: 880 mm Total power: 30 kW Machine weight approx.: 3.9 t Hydraulic high-speed punching press for precision applications - For punching, drawing, pressing, coining, bending, riveting, straightening, assembling - With hydraulic clamp feeding system type HS 150 and 7-roll straightening unit (driven) - Standard strip dimensions: approx. 0.4mm – 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm thickness can be processed. Feed length infinitely adjustable via control. - With round column ram guide - With automatic central lubrication - High-speed: up to 400 strokes/min - Motor-driven adjustable fixed stop (manually/motor-driven adjustable from below) - Operating modes: continuous or single stroke Equipment: - 1x hydraulic power unit - 2x control cabinets Condition: Punching press has a control system issue. Sold as-is, for spare parts or as a replacement machine. i.D.

Stanje: rabljeno, Technical details: Pressure: 200 t Stroke: approx. 200 mm Table size: L:1200 x W:450 mm Jaw width: 1000 x 200 mm Total power requirement: 18 kW Machine weight approx.: 15 t Machine dimensions (LxWxH): 4.5 x 1.5 x 2.2 m Carrier Straightening Press Eccentric Bending Machine - Jaw holder: LxW 1200 x 220 mm Cgodeu Nfrpjpfx Af Deu - Jaw adjustment: 200 mm, traversable - Jaw opening width: 300 mm - Manual operation - Electrical cabinet (LxWxH: 0.85 x 0.8 x 2.7 m) Accessories: - Various stops, shims, angle stops, and marking gauges Included as per list (i.D.).

Stanje: dober (rabljeno), Leto izdelave: 2011, Tlak 160 t Skupna potrebna moč 18,5 kW Teža stroja pribl. 13,5 t Cgjdpfx Afeza Amxo Dju

Stanje: rabljeno, Leto izdelave: 1971, Tlak 100 t Razdalja med stebri 400 mm Hod 20 - 140 mm Vpenjalna površina mize 900 x 710 mm Površina bata 560 x 450 mm Nastavitev bata 80 mm Cedoxuv Htepfx Af Djgu Vgradna višina 470 mm Število hodov 70 hodov/min Skupna potrebna moč 10,5 kW Teža stroja pribl. 9 t Dimenzije stroja D x Š x V 1,98 x 1,60 x 3,10 m

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 7 A, stiskalna sila: 150 t, hod: 300 mm, Oprema: CE označba, dokumentacija / priročnik, MOTORIZED DOUBLE-SPEED AUTOMATIC HYDRAULIC PRESS WITH FAST APPROACH CAPACITY: 150 TON Cgjdpfey E Rr Ijx Af Dou Monolithic frame, entirely laser-cut and bolted in a pack. This feature ensures that all our presses remain deformation-resistant, even at the points of greatest stress. All components are manufactured in Italy. Hydraulic power unit with submerged ICME motor, 400 V, 50/60 Hz. Cylinders and frames manufactured in Italy. Monoblock GALTECH distributor. No. 2 unidirectional external gear pumps in aluminium by VIVOIL: one for fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel for setting required power. Maximum pressure valve with mechanical lock to prevent overpressure. High-end 2-way CETOP MP valve block. Standard pressure gauge to display delivered power. INTECH electrical panel certified according to current regulations and with independent CE marking. Maximum Capacity: 150 TON Approach Speed (fast): 1450 mm/min Working Speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shank diameter: M30 Tank capacity: 50 liters Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1300 kg

Stanje: rabljeno, Leto izdelave: 1988, Pressure 400 t Column spacing 1100 mm Cgjdpfxjvuuknj Af Dsu Stroke 250 mm Stroke rate 25 - 75 /min Distance table/ram, max. stroke up, adj. up 900 mm Table area 1100 x 965 mm Ejector force in table 30 t Ejector stroke in table 80 mm Ejector force in ram 3 t Ejector stroke in ram 60 / 70 mm Ram area 980 x 800 mm Lateral column opening 800 mm Ram adjustment 20 mm Drive power 80.0 + 5.5 kW Weight 47.0 t Space requirement (WxDxH) 3.5 x 3.3 x 6.0 m Weight of control cabinet 1.4 t Space requirement control cabinet (WxDxH) 4.9 x 0.5 x 2.6 m Multi-stage cold forging press with joint drive with continuously adjustable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the ram, motorized ram adjustment, pneumatic counterbalance cylinder in the press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in ram (3 t, 60 mm), motorized central lubrication

Stanje: rabljeno, Leto izdelave: 2012, Tlak 260 t Razdalja med stebri 360/270 mm Hod 60 mm Cedpfxjvuuk Io Af Degu Število hodov 50 / min Razdalja miza/beran, največji hod zgoraj, zgornja nastavitev 225 mm Površina mize 340 x 380 mm Višina mize nad tlemi 800 mm Površina berana 230 x 220 mm Nastavitev berana 12 mm Pogonska moč 4,5 kW Dimenzije (ŠxGxV) 2,0 x 1,55 x 2,6 m Teža 4,5 t Obnova 2012: nova kombinacija sklopka-zavora novi krmilni sistem Siemens S 7 novo dvoročno in nožno upravljanje

Stanje: novo, Stanje: novo Dobavni rok: cca 4 mesece po naročilu Cgedpfoynnfiex Af Dju Država porekla: Italija Cena: 55.200 € Leasing obrok: 1.043,28 € Pritisna sila: 200 t Hod: 500 mm Miza: 1000x600 mm Vgradna višina: 640 mm Hitri pomik: 21 mm/s Delovna hitrost: 2 mm/s Motor: 5,5 kW Dolžina: 1800 mm Širina: 1300 mm Višina: 2500 mm Teža: 6.400 kg 2 hitrosti Nastavljiv maksimalni pritisk Manometer

Stanje: novo, Stanje: novo Dobavni rok: cca 4 mesece od naročila Država izvora: Italija Cena: 43.200 € Leasing obrok: 825,12 €/mesec Tlačna sila: 150 t Hod: 500 mm Miza: 800 x 600 mm Vgradna višina: 630 mm Hitri pomik: 22 mm/s Delovna hitrost: 3 mm/s Motor: 4 kW Dolžina: 1.800 mm Širina: 1.200 mm Višina: 2.400 mm Teža: 4.500 kg 2 hitrosti Cgjdpfx Afjynnfco Deu Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece od naročila Država izvora: Italija Cena: 31.400 € Leasing obrok: 599,74 €/mesec Tlačna sila: 100 t Csdpsynnd Sefx Af Degu Hod: 500 mm Miza: 800x600 mm Vgradna višina: 615 mm Hitri pomik: 26 mm/s Delovna hitrost: 4 mm/s Motor: 4 kW Dolžina: 1.600 mm Širina: 900 mm Višina: 2.300 mm Teža: 3.100 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece od naročila Država izvora: Italija Cena: 25.000 € Leasing obrok: 480 € Pritisna sila: 70 t Hod: 500 mm Miza: 700x500 mm Vgradna višina: 600 mm Hitri pomik: 25 mm/s Delovna hitrost: 5 mm/s Motor: 4 kW Dolžina: 1400 mm Širina: 900 mm Višina: 2250 mm Teža: 1900 kg Csdpfxjynnd Es Af Degu 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece po naročilu Država porekla: Italija Cena: 22.900 € Leasing obrok: 439,68 € Cgsdpoynndxofx Af Deu Tlačna moč: 40 t Hod: 500 mm Miza: 700x500 mm Vgradna višina: 600 mm Hitri pomik: 26 mm/s Delovna hitrost: 9 mm/s Motor: 4 kW Dolžina: 1400 mm Širina: 900 mm Višina: 2200 mm Teža: 1300 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Hidravlična ravnalna stiskalnica Proizvajalec: G + K Leto izdelave: 1992 Največja stiskalna sila: 130 t Velikost spodnje mize: 800 x 500 mm s T-utorji Velikost zgornje mize: 800 x 500 mm s T-utorji Vgradna dimenzija: 1000 mm Cgedpfeza S Daox Af Dsu Sistemski tlak: 250 bar Elektromotor: 15 kW Teža: 3400 kg Obratovalna napetost: 380 AC / 24 DC Bsbmm Av Esxr Rnaeuodc Krmiljenje obnovljeno pred 5 leti Stroj je opremljen z dvema mizama, spodaj in zgoraj 800 x 500 mm. Na hidravlični agregat je vgrajena dušilka za nastavitev tlaka.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Hidravlična ravnalna stiskalnica Cgsdpoza Szrofx Af Deu Proizvajalec: G +K Leto izdelave: 1992 Največja tlačna sila: 130 t Velikost spodnje mize: 800 x 500 mm z T-utoraji Velikost zgornje mize: 800 x 500 mm z T-utoraji Vgradna dimenzija: 1000 mm Sistemski tlak: 250 bar E-motor: 15 kW Teža: 3400 kg Obratovalna napetost: 380 V AC, 24 V DC Krmiljenje obnovljeno pred 5 leti 2 spodnji mizi 800 x 500 mm Na hidravlični enoti je možna nastavitev tlaka preko dušilke, kar je vidno na manometru. Elektrika prenovljena s strani podjetja Schäger Steuerungsbau.

Stanje: dober (rabljeno), Leto izdelave: 1991, Hydraulic horizontal straightening and bending press Maximum pressing force: 160 t Manufacturer: MAE, Type: HY RI 160 RH, Year of manufacture: 1991. Cgjdpfx Afjcffzae Dsu For further technical specifications, please refer to the data sheets.

Stanje: rabljeno, Leto izdelave: 1979, Tlak 100 t Hod 500 mm Površina mize 4000x500 mm Teža stroja ca. 5,7 t Hidravlična ravnalna stiskalnica tip HY – S 100 RH MAE komplet z ravnalno enoto Leto izdelave 1979 Cgodpoy Tpr Ajfx Af Dju Pregledano po UVV Hod 500 mm Tlačna moč 100 t Miza 4000 x 500 mm Teža 5700 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Helmerding stiskalnica Tip: KDH 315/2100/2 Pritiskalna sila 3.150 kN Višina hoda 40-200 mm Cgsdpfxsy Tqahs Af Dsu Število hodov 20-100 1/min Nastavitev berana 120 mm Vgradna višina 500 mm Površina mize 2.000 x 1.200 mm Površina berana 2.000 x 1.100 mm Teža stroja 44.000 kg Helmerding valjčni podajalnik Tip: EWH 800/150 Širina traku 100 - 800 mm Debelina traku 0,5 - 6,0 mm Helmerding ravnalni stroj Tip: R-70/800/9-S Širina traku 100 - 800 mm Debelina traku 0,5 - 5,0 mm Premer ravnalnih valjev 70 mm Število ravnalnih valjev 9 kos Helmerding odvijalna kolutnica Tip: HE-4/800/MOT/HYD Širina traku 100 - 800 mm Največja teža koluta 4.000 kg Notranji premer koluta 508 mm Zunanji premer koluta 1.000 - 1.600 mm

Stanje: rabljeno, Leto izdelave: 1994, Tlak 600 t Hod 100 mm Število hodov 45 /min Razdalja med stebri 580 mm Vgradna višina 460 mm Površina mize 550 x 620 mm Površina bata 550 x 430 mm Nastavitev bata 50 mm Pogon 15,0 kW Teža 13,5 t Dimenzije (ŠxGxV) 1,5 x 2,45 x 2,75 m Nazivni hod 1,7 mm Nazivna energija 10,2 kJ Cedpfx Afew U Ekps Djgu s kolenskim pogonom, zavoro na vztrajnik, hidravlično sklopko, izravnavo okvirja preše, samonadzorovanim krmiljenjem

Stanje: novo, številka stroja/vozila: DF0189, stiskalna sila: 500 t, Single-Column Press – Manufacturer Calende – 500 t Straightening Press – Table 1,200 × 1,200 mm For sale is a powerful hydraulic single-column press from the manufacturer Calende with a pressing force of 500 t. This machine impresses with its compact design while delivering high pressing performance, ideal for demanding straightening, assembly, and forming operations. ==== Technical Data & Information: Single-Column Press Calende – 500 t Straightening Press ==== General Information - Manufacturer: Calende - Model: Single-Column Press - Design: C-Frame Press / Single-Column Press - Pressing force: 500 t - Machine weight: approx. 40 t - Dimensions (L × W × H): 2,800 × 1,750 × 4,350 mm ==== Working Area - Pass-through width: 1,200 mm - Stroke: 400 mm - Max. working height: 800 mm - Table height: approx. 1,200 mm Csdpfsfxykaox Af Djgu ==== Table & Ram - Table plate: 1,200 × 1,200 mm - Ram plate: 1,000 × 1,000 mm ==== Speeds - Approach speed: 0 – 10 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Motor power: 50 kW - Return force: 50 t - Oil tank capacity: 700 l ===== Straightening operations, assembly work, forming technology, press fitting, maintenance, toolmaking Single-column press, C-frame press, hydraulic press, straightening press, industrial press, die spotting press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery regulations (Directive 2006/42/EC), EC standards, and EU safety provisions. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which builds upon those norms. Our greatest strength is custom machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 110 t, Single-column press – Manufacturer Calende – 110 t Straightening Press – Table 800 × 700 mm For sale is a compact hydraulic single-column press (C-frame) from manufacturer Calende with a pressing force of 110 t. This machine impresses with its space-saving design, robust performance data, and versatile application possibilities, making it ideal for straightening, assembly, and pressing operations. ==== Technical Data + Information: Single-column Press Calende – 110 t Straightening Press ==== General Information - Manufacturer: Calende - Model: Single-column press - Design: C-frame press / Single-column press - Pressing force: 110 t - Machine weight: approx. 4.5 t - Dimensions (L × W × H): approx. 1,650 × 1,150 × 2,800 mm ==== Working Area - Stroke: 400 mm - Max. working height: 500 mm - Table height: approx. 900 mm ==== Table & Ram - Table plate: 800 × 700 mm - Ram plate: 600 × 500 mm - Table cut-out: 150 × 150 mm ==== Speeds - Approach speed: 10 mm/s - Pressing speed: 10 mm/s - Rapid traverse: 10 mm/s ==== Hydraulics - Total power requirement: 11 kW - Retraction force: 11 t - Oil tank capacity: 250 l ==== Controls & Options - Monitor: Siemens, 7" Codpfofxygtjx Af Degu - Option: Siemens S7-1200 control - Option: Side panels - Option: Light curtains front and rear ===== Straightening work, Assembly work, Press-fitting work, Workshop applications, Maintenance Single-column press, C-frame press, Hydraulic press, Straightening press, Workshop press, Press-fitting press, Industrial press, Tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all requirements of the national Brazilian safety directive NR 12, which builds upon them. Our major strength is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. The hydraulics of our presses are predominantly equipped with components from leading European manufacturers.