Portalna ravnalna stiskalnica

Hidrobrasil Richtpresse

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: -, stiskalna sila: 40 t, This press is based on an already proven and tested design and can be newly manufactured at short notice and specifically tailored to your application. Inspection of the existing machine at the customer's site is possible upon prior arrangement. The press is suitable for straightening work, assembly operations, as well as pressing-in and pressing-out processes. ### Technical Data – Frame *Pressing force: 40 t *Usable table area: 635 × 555 × 70 mm *Distance between columns: 900 mm *Opening (ram – table, max.): 500 mm *Distance table to floor: 1,200 mm *Overall dimensions (W × D × H): 1,880 × 900 × 2,300 mm *Total weight: approx. 1,500 kg *Frame: Welded steel frame * * * ### Hydraulics – Cylinder *Piston stroke: 550 mm *Piston rod diameter: Ø 90 mm *Cylinder diameter: Ø 150 mm *Max. operating pressure: 280 bar * * * Hfodpfx Aboyia D Re Esd ### Hydraulics – Power Unit *Pump: ASC *Delivery rate: 12 l *Motor power: 4 kW *Return speed: 16 mm/s *Idle speed: 10 mm/s *Oil tank volume: 120 l *Hydraulic block / valves: Hydropack *Pressure gauge: Manometer *Pressure adjustment: Adjustable *Pressure switch: Present *Power unit: Side-mounted on the press * * * ### Operation * Manual operation via adjustable hand lever valve * Sensitive speed control via lever position * Pressure adjustment via rotary control * * * ### Electrical Data *Main supply: 400 V AC *Control voltage: 24 V DC *Frequency: 50 Hz *Hydraulic main motor connection: 4 kW *Total connected load: approx. 5 kW * * * ### Control Cabinet / Electrical Equipment *Protection class: IP 54 *Spare capacity: approx. 30% *Cooling: No *Internal lighting: No *Operating mode selector switch: Yes, lockable *Electrical components: Siemens, Allen-Bradley, Sick * * * ### Paint Finish *Frame / Main body: RAL 7035 (Light Grey) *Aggregates & moving parts: RAL 7016 (Anthracite Grey) *Painting: 2-coat finish (primer + topcoat) *Special colours: RAL colours freely selectable by arrangement * * * ### Documentation & Standards *Documentation: German and English *Documentation included: * CE documentation * Spare parts lists * E-plans and E-BOM (digital) Guidelines & standards: * 2006/42/EC Machinery Directive * 2014/35/EU Low Voltage Directive * 2014/30/EU EMC Directive * EN ISO 16092-1 / -3 * EN 60204-1 * EN ISO 12100 * EN ISO 4413 * * * ### Note The cut-out in the table was originally implemented at the express request of the customer. Alternatively, the press can be supplied with a solid steel plate or with a T-slotted plate. The table design can be individually adapted to the application. The ram features an integrated tool holder. Various press heads with a diameter of up to 250 mm can be mounted via this interface. This allows the press to be flexibly adapted to changing tools and production processes. We would be happy to advise you on a version precisely tailored to your production and application requirements. Hydraulic workshop press, 40-t press, Durendus press, new hydraulic press, workshop press with table, assembly press, straightening press, pressing-in press, industrial workshop press, CE-compliant press, hydraulic press 400 V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, X-os 1.500 mm Y-os 660 mm Z-os 600 mm Hfjdpexm Tufjfx Ab Esd Dimenzija mize 1.680 x 660 mm Vretenova hitrost 12.000 obr/min Vpenjalo orodja SK40 Menjalnik orodij 24 pozicij Krmiljenje ULTIMAX 4 Vključuje 4. os Kitagawa MR 200 (rotacijska os + konjiček) Vključuje transporter za ostružke Vključuje notranje hlajenje skozi vreteno (IKZ)

Stanje: novo, Leto izdelave: 2019, stiskalna sila: 400 t, Press force: 400 t Upright distance: 2,500 mm Stroke: 600 mm Table size: 2,500 x 2,000 mm Distance table - ram (bottom dead center): 600 mm Total power requirement: 18 kW Forward speed: 9 mm/sec Hjdpfed Ttydex Ab Eefd Return speed: 19 mm/sec Pump capacity: 67 L/min Total weight approx.: 26 t

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, stiskalna sila: 200 t, Main Cylinder Press Capacity: 200 t - Maximum operating pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder movement: 1450 mm - Max. longitudinal frame movement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic unit power: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in the delivery - Hydraulic units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter by FILTREC - Oil filter by FILTREC - Air and water (cooler) cooling system for hydraulics - Stroke cylinders integrated in the worktable Rod diameter: 25 mm - Stroke: 80 mm - Controlled via cylinder control system or hydraulic unit with lever control - 10 stroke cylinders installed - Digital control with position measurement via encoder and pressure measurement with value display - Siemens KTP 900 9" touchscreen display for programming (up to 99 programs): - Maximum cylinder stroke up/down - Pressure dwell time at bottom table - Decompression time - Setting the working pressure - Piece counter - Pre-stop up/down stroke accuracy of 0.1 mm - Alarm management - Frame-mounted display for real-time display of process parameters - Remote control unit with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic power unit with solenoid valves (replaces hanging control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is SIEMENS (S7-1200 series) - Siemens 9" MTP900 LCD touchscreen integrated in control cabinet - Electrical equipment from SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via the LCD touchscreen - Operating mode (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved; all the above-mentioned values can be programmed in each recipe - Activation via remote control - Double button for slow or fast up/down movement, emergency stop, and maneuver confirmation switch - Safety light curtain is mounted at the bottom of the portal columns - Control cabinet mounted on side wall of bridge - Anti-rotation lock for the cylinder - Oil temperature is displayed on the LCD touchscreen - Overtemperature warning for hydraulic oil is displayed on the LCD touchscreen - Filter contamination status is displayed on the LCD touchscreen - System errors are displayed on the LCD touchscreen Hsdpfx Abjxrb Nbo Ejfd - Press status information is displayed on the LCD touchscreen - As soon as oil temperature reaches 45 °C, the air cooler starts to cool the oil. At 65 °C, the machine stops operation until it cools back down to operating temperature - An operating manual is included in the scope of delivery - The system fulfills all essential safety and health requirements according to CE regulations.

Stanje: novo, Leto izdelave: 2025, KOMPAKTNA RAZTEGLJIVA KOMORA ZA PRŠENJE TEKOČIN Raztegljive komore za pršenje so zasnovane za ročno nanašanje barve s stranskim izsesavanjem, namenjene izločanju razpršene tekoče barve. Prednost raztegljivih komor je prihranek prostora v delavnici. KONSTRUKCIJA Izdelana je iz škarjastega sistema karoserije, sestavljenega iz elektrogalvaniziranih pravokotnih in okroglih cevi, zunaj pa je prekrita s PVC platnom. Gibljivi sistem vključuje industrijska kolesa ali vodila z drsnimi kolesi; izbira je odvisna od tega, ali je uporaba zunanja ali notranja ter od dolžine komore. Vrata so zasnovana kot zavesa, ki se zapre med samim nanosom barve. SISTEM VENTILACIJE Stransko izsesavanje zagotavlja visoko učinkovitost med nanosom barve. Filtrirna stena je modularne izvedbe iz pocinkane pločevine, z integriranimi policami ter zasilnimi vrati na obeh straneh. Izsesovalni ventilator je nameščen na vrhu filtrirne stene, električni motor ventilatorja pa je zunaj zračnega kanala, kar preprečuje stik motorja z onesnaženim zrakom in s tem zmanjša tveganje za iskre. SISTEM FILTRACIJE Izsesovalni filter je dvostopenjski in zagotavlja 99,9 % učinkovitost; nameščen je na stranski filtrirni steni komore. Pred-filter se nahaja pri vratih v obliki zavese, ta zagotavlja naravni pretok zraka med delovanjem izsesovalnega ventilatorja. Kontrolna plošča ima opozorilno luč, ki vas opozori na potrebno servisiranje ob zamašitvi filtrov. Hfsdevxfkajpfx Ab Esd Izdelano v Turčiji CE oznaka Ponujamo najboljše tehnične rešitve in konkurenčne cene! * Pisarna v Franciji in Nemčiji. Kontaktirajte nas za več informacij in ponudbo.

Stanje: rabljeno, Leto izdelave: 2019, stiskalna sila: 100 t, Press force: 100 t Stroke: 1000 mm Table surface: 1045 x 1045 mm Extendable table travel: 800 mm Table speed: 50 mm/sec Dimensions (L x W x H): approx. 2550 x 2850 x 3620 mm Height above floor: 600 mm Piston diameter: 76 mm Ram diameter: 110 mm Ram bore: 40 H7 Cylinder adjustment: 300 mm Total power requirement: 5.5 kW Maximum pump capacity: 24.9 l/min Working pressure: 250 bar Oil tank: 200 l Installation height (distance table to ram plate): 1600 mm Clear opening: 1200 mm Machine weight approx.: 6.6 t Hfedsffamxjpfx Ab Esd Table through-width: 180 mm Clear depth under table: 400 mm Transport load: 1000 kg Cylinder rapid traverse downwards: 1 - 10 mm/sec Working stroke: 3 mm/sec Cylinder return stroke: 1 - 25 mm/sec Movable table speed: 33 mm/sec Frame press with a capacity of 100 tons Cylinder travel 300 mm to right and left Table moves on spring-loaded ball rollers.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 100 t, hod: 400 mm, - Cylinder stroke 400 mm Hfodpfxogp Dc Re Ab Eed - Working width 1010 mm - Movable cylinder - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Leto izdelave: 2024, stanje: novo, Make: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30' Strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (LxWxH): 3200x2300x1350 mm Weight: 3780 kg Standard equipment: - EZM9910 control unit - Programmable backgauge range 750 mm via control unit - Plastic inserts for hold-downs - 1 side gauge and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Recirculating ball screw - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Hfodpsd R Er Dofx Ab Esd Optional equipment: - Adjustable angle stop 0–180° The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Additional machines are available and ready for demonstration at our Staufenberg location. Further information is available on request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-way ram guide Hfedpegpxc Sjfx Ab Ejd - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm Hodpfolgvkiex Ab Ejfd - Flow drilling up to M12 - Drillings up to Ø 50mm