Vertikalna stružnica NOVO

Emsil group VTL 45/50

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.400 mm, premer vretena: 100 mm, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 2.500 obr/min, The machine is in good technical condition, currently disconnected. Equipped with a Heidenhain TNC 530i control system, chip conveyor, and a 40-position tool magazine. Tjdpfx Abev Upbnjgef

Stanje: rabljeno, Tool holder interface type: HSK-A 100 Tool holder type: Wohlhaupter Todpfxsg Nqlio Abgof Tool holder type: Fine boring tools / Facing heads / Precision turning Large selection of Wohlhaupter HSK-A 100 tool holders, boring heads, adapters, and extensions available for sale. A parts list with prices will be provided upon request.

Leto izdelave: 2012, Stanje: dober (rabljeno), Machine has 5,600 total spindle hours Tsdpfxowvqh Ds Abgsf Datron D 5 Dental - Milling Machine, Year of manufacture: 2012, 5-axis simultaneous machining, Control: PC - Beckhoff, Automation / 8 blanks, Milling spindle: 1.8 kW, Spindle speed up to 50,000 rpm, Tool holder: HSK C 25, 15-position automatic tool changer, Rotary/swivel axis, A-axis: +/- 25°, B-axis: +/- 45°,

Stanje: rabljeno, Leto izdelave: 2004, Technical data: Travel (X/Y/Z): 650 / 500 / 450 mm Clamping area: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 6,500 rpm Maximum table load: 400 kg Number of tool magazine slots: 20 Power consumption: 24 kVA Todpfxswglapo Abgof Machine weight, approx.: 5,500 kg Equipment: - Motor spindle 12,000 rpm - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain electronic handwheel - Menzel minimum quantity lubrication system - Approx. 25 tool holders

Stanje: rabljeno, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar passage: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes, NC-controlled - Slide unit 1.2: X and Z axes, NC-controlled - Slide unit 2.1: X and Z axes, NC-controlled - Slide unit 2.2: X and Z axes, NC-controlled - Slide unit 3.1: X and Z axes, NC-controlled - Slide unit 3.2: Z axis, NC-controlled - Slide unit 4.1: X and Z axes, NC-controlled - Slide unit 4.2: Z axis, NC-controlled - Slide unit 5.1: X and Z axes, NC-controlled - Slide unit 5.2: Z axis, NC-controlled - Slide unit 6.1: Z axis, NC-controlled + SCARA axis - Slide unit 6.2: X and Z axes, NC-controlled - Slide unit 6.3: X axis, NC-controlled ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW Tedpfxeuhants Abgof DIMENSIONS AND WEIGHT - Footprint: 3,329 x 2,032 mm - Height: 2,654 mm - Weight: 7,100 kg OPERATING HOURS - Power-on hours: 45,965 h - Production hours: 19,065 h ACCESSORIES - Siemens 840D CNC (PL) with dual NCU - 2 CNC operating panels - 6 TOPLUS collet receivers with integrated stop - 1 counter-spindle in position 6.1 - Clamping device on counter-spindle: Röhm chuck KFD-HS 110/3 - Counter-spindle internal coolant supply - CNC options for counter-spindle / polygon turning attachment - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft, positions 1.2.3 - Preparation for 2 additional operations with electronic shaft, positions 4.5.6 - STAUBLI robot, type TX60 (6 axes) - Robot gripper, external double clamping type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps at 40 bar - Büschel oil mist extraction system - RIEDEL cooling system - ARTIS preparation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Wir können es nicht in der Produktion einsetzen, daher der Verkauf. Tsdperq A Sxsfx Abgsf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Tedpfxewxw S Ij Abgof Available immediately! Can be tested under power.

Stanje: rabljeno, Leto izdelave: 2007, Maximum gear cutting diameter: 2000 mm Workpiece diameter: 2700 mm Table diameter: 1500 mm Maximum module: 22 Control system: 840D Rotational speed: 3.5 rpm Maximum table load: 20,000 kg Center distance: 70–1220 mm Stroke length: 30–330 mm Stroke rate: 10–200 strokes/min Total power requirement: 138 kW Machine weight: approx. 38 t Space required: approx. 11 x 5 m Machine: Fully CNC-controlled machine with electronic gear synchronization for C and D axis, equipped with digital INDRAMAT drive technology. Self-rigid machine bed of welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around design, Longitudinal guide with roller recirculating shoes. Precision-ground, preloaded ball screw with backlash-free preloaded nut. Digital AC drive technology featuring backlash-free transmission. Linear measuring system for radial positioning. Free-standing machine table with electrohydraulically backlash-free preloaded double worm gear, index wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Through table bore diameter 500 mm, open at the bottom. Water-cooled digital AC servo motors. Machine must be installed on a foundation. Column: Machine column as high-rigidity cast construction for 1200 mm axial travel. Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide, and wrap-around roller recirculating shoes. Precision-ground ball screw with backlash-free preloaded nut. Digital AC drive technology. Rotary encoder for axial positioning. Gear shaping head: SK 4.1 with hydraulic NC servo drive for shaping spindle movement and cutter relieving, stroke length 330 mm, shaping spindle diameter 160 mm. Hydrostatically mounted shaping spindle, straight guiding and lateral guiding for relieving motion. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Stroke numbers from 10 – 200 strokes/min, stroke speed from 5 – 45 m/min. Shaping spindle speeds for working and return stroke can be programmed independently. Within the cutting area, the spindle speed remains constant. Tsdev E R Eijpfx Abgof Cutter wheel speed max. 10 rpm, digital AC drive technology. Cutter relieving direction for internal and external gear cutting can be manually reversed. Lateral offset of the shaping spindle axis up to max. 50 mm off machine center, manually adjustable, to prevent cutter wheel collision during return stroke.

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), Vertical Turning Machine Center Dörries Scharmann Type VCE 2000/160 Pallet size: 1,600 mm Pallet load: max. 8,000 kg Number of pallets: 13 pcs Table indexing: C-axis 0.001° Table cross travel (X): 2,300 mm Column longitudinal travel (Z): 1,500 mm Crossbeam positions: 9 steps of 100 mm each Feed rate X/Y/Z: 1 – 6,000 mm/min Rapid traverse X/Y/Z: 8 m/min Max. turning diameter: 2,000 mm Max. workpiece height: 1,500 mm Main Spindle Spindle drive motor: 69 kW Spindle speed: 2.8 – 315 rpm Tool magazine for turning: 59 stations – system 240.2 Live spindle – SK50 Spindle drive motor: 30 kW Spindle speed: 10 – 1,500 rpm Tool magazine for SK50: 61 stations CNC Control: Siemens Sinumerik 880M Accessories FMS: 13 pallets Rotary loading stations: 2 pcs Coolant unit with filtration system Through-spindle coolant Machine weight: Approx. 40 t Year of manufacture: 1993 Tsdpoguk S Sjfx Abgsf (See also further offers from this seller)

Stanje: dober (rabljeno), Leto izdelave: 1998, CNC Vertical Turning Lathe DS Dorries Scharmann - VCE 2000 FMC MACH-ID 9088 Manufacturer: DS Dorries Scharmann Model: VCE 2000 FMC Control: SIEMENS 840C Year of manufacture: 1998 Max. turning diameter: 2000 mm Table diameter: 1600 mm Horizontal slide travel: 1150 mm Ram stroke (left): 995 mm Tool changer: 24 positions Spindle speed: 280 rpm Todjwb Ayiopfx Abgof Power: 60 kW Max. turning height: 995 mm C-axis: 360000° Driven tools power: 30 kW Length: 10,200 mm Width: 8,200 mm Height: 8,200 mm Weight: 42,000 kg