Dvojni polnilec za postaje

Mahros Runner D\C

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Double-edger and trimming circular saw with electronic control, comprising: RET straightening and feed table. Chain bed in front of the machine with a liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment is hydraulic, with electronic positioning control offering the following setting options: stepless, 1 cm indexing, and switchable to 2 cm indexing. Cutting width between the flanges 24 - 440 mm. 10 variable preset dimensions, direct input of dimensions in mm. Constant dimension allowance, shrinkage allowance in percent. Splitter wedge pair: 1 x at zero line, 1 x hydraulically adjustable separately, with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Kedpfx Afown D Izj Noll Chip separator ASV DK II with 2 separating lamellae. Electric switch cabinet with power section and PLC control. Operator console. Slat sleeve, clamping length 403 mm. Adjustment and zeroing sleeve. Professionally dismantled and loaded free on truck.

Stanje: novo, Leto izdelave: 2025, Laserski vir: Raycus ali Max: 4/6/8/12 kW Laserska glava: 3D BOCI Krmilni sistem: FSCUT 5000 A Vpenjalna glava: 20–450 mm Nakladanje/razkladanje: 12000 mm X-/Y-os Natančnost pozicioniranja: ±0,05/1000 mm Ponovljivost: ±0,03/1000 mm Pospešek: 0,8g (m/s²) Rotacijska hitrost: 60 obr/min Maks. pozicionirna hitrost: 60 m/min Maks. teža cevi: 1500 kg 1. Raycus 6000W laserski vir Kjdei Apfzspfx Af Nell 2. Ozobljena (bevel) laserska glava 3. Varjen okvir DPL 4. Schneider električni elementi 5. Poševno zobati letev KH 6. Reducir Techmech 7. Yaskawa servomotor 8. Vodila SHAC 9. Integrirano krmiljenje napajanja 10. Programska oprema FScut 5000 11. Integrirana električna omara 12. HANLI hladilnik vode 13. Konzolna MOSTNA os-X FHBS 14. Avtomatsko zbiranje odpadkov 15. Gosenični avtomatski zbiralnik obdelovancev 16. Avtomatski podpornik 17. Okvir za nalaganje 12000 mm 18. Okvir za razlaganje 12000 mm

Leto izdelave: 2023, Stanje: novo, Fully Automatic Orbital Stretch Wrapper SPINNER 1000s Application: Packaging, bundling, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator Side: - Right-hand operation in feed-through direction General Technical Data: - Main motor power: 1.5 kW - Max. ring rotational speed: 80 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 770 kg Standard Equipment: - Powered conveyor (infeed and outfeed) for automatic product feeding - Adjustable ring speed - Adjustable stretch tension with mechanical brake system - Automatic stretch film clamping and cutting system - Automatic film attachment system - Pneumatic front and rear hold-downs that press from above to secure the product during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touchscreen for machine parameter adjustment according to product requirements - Operator safety systems Kodpfsfuwg Iex Af Njll Optional Equipment: - Various types of conveyors - Infeed and outfeed rollers - Bubble wrap unit Technical Features: Wrapping Sizes: - Max. length: unlimited - Min. size (WxHxL): 100x18x550 mm Conveyor Functions: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 12 m/sec - Load capacity: 100 kg/m Stretch Film Properties: - Max. width: 200 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Stanje: zelo dobro (rabljeno), Coating and packaging line with thermoregulated film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of edge protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Reel holders (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross-sealing unit (2500 mm) - Maximum usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight components (from 1 to 5 kg) using sealing bar c) Thermal shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm tunnel section) with hot air circulation (heating by electric resistors and fan), installed total power kW ? Ksdogp Diaopfx Af Njll - Conveyor with metal slats (approx. 1500 mm width) - Maximum usable height 700 mm - Adjustable feed speed from approximately 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation Kjdecggy Sepfx Af Njll - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. Ksdsdfgg Ijpfx Af Nsll B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Leto izdelave: 1980, Stanje: dober (rabljeno), Stellite Tipping Machine VOLLMER GF10U Blade thickness: 1 to 4 mm Band saw blade width: 60 to 420 mm Klodpfogxb Ebjx Af Nel Circular saw blades: 300 to 1,200 mm diameter Electric feed drive via geared motor

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) Kledpfx Ajfi Tg Hof Nel No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: rabljeno, Leto izdelave: 1979, Premer reza: 440 mm Teža stroja: cca. 780 kg +++++ Kljdpfx Ajf Dwa Uof Nel Upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega prikaz pod napetostjo ali izdelava videoposnetka nista mogoča. Naš oglas vsebuje najrelevantnejše fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Max. working size (mm): 400 x 300 mm Distance from saw blade to work table (mm): 3–200 mm Conveyor belt width (mm): 385 mm Saw wheel power (kW): 18.5 kW Saw unit gear wheel diameter (mm): 711 mm Feed speed (m/min): 0–12 m/min Hydraulic pressure (kg/cm²): 55 kg/cm² Dust extraction outlet diameter: 102 mm x 2 Saw blade size (L x W x H) (mm): 4572 x 27 x 0.9 mm Kedpfx Asi Ay Hqsf Njll Saw kerf (mm): 1.5–1.8 mm Overall dimensions (L x W x H) (mm): 3000 x 2250 x 2000 Net weight (kg): 2100 kg