Merilnik vlage

Brookhuis FMI

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the package. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (angled cutting) Maximum log width: 1250/1090 mm Maximum cutting length: 8 m Main motor: 45 kW Cast iron wheels Wheel width: 130 mm Wheel diameter: 1200 mm Vertical lifting (up/down): dual TR60x9 (18) screw system + 11 kW Danfoss frequency inverter + Siemens 3-phase motor with brake Kodew E Ei Uspfx Abhend Electrical motor for head up/down: 11 kW PV 45 bandsaw blade, length: 8685 mm, thickness: 1.2 mm, width: 140 mm / 150 mm Powered feed with electronic forward and reverse control, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electrical deactivation Digital thickness setting with Wravor V280 program Hydraulic power unit 40 l, tank with two pumps 13+6 l + 3 kW motor Complete hydraulic system Hydraulic bandsaw blade guide left and right HIWIN linear guides Hydraulic debarker / bark cutter 1 Hydraulic board ejector arm 1 Additional hydraulic ejector arm & board alignment guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 pipe holders: 1 Water cooling – automatic booster pump cooling (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication: 1 TRACK: Welded structure, 14 m length Hydraulic clamp with two cylinders: 6 Hydraulic log turner: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter on holders (mechanical roller): 4 Hydraulic log lifter on holders (hydraulic roller): 7 Set of lifting rollers: 7 hydraulic + 4 m: 1 New type hydraulic log turner: 3 Log centering device – 1 set: 4 Hydraulic aggregate 120 l, tank with single 50 l pump, 15 kW motor + Danfoss frequency inverter: 1 Cable carrier with energy chain: 14.5 C-profile support for ventilation – 4 double trolleys Belt outfeed conveyor 4 m with 1 m feed section + 3 kW electromotor, front part with hydraulic lifting

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Kjdpfx Aswya Syebhend Item No.: SK-K-24001 DIMTER cross-cut saw line comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.

Stanje: rabljeno, Leto izdelave: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Crosscut Saw Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 – 5,000 mm Infeed widths min./max. 80 – 200 mm Infeed thicknesses min./max. 38 – 80 mm Max. wood cross-section: 200 x 50 mm End product length min./max. 700 – 1000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood Performance data: Feed speed max. 180 m/min, infinitely variable Time per crosscut incl. braking: 0.7 – 1.2 s Component overview: Pos. 1: Infeed conveyor belt in front of the saw Length 1.5 m, linked to the saw’s feed motor Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and built-in waste extraction unit Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, including OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor/sorting station with drive unit, without ejector Belt length approx. 1.5 m The machine is already dismantled and in storage. The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The conveyor table is included, only the rubber belt is missing. Knedpfxsu Atmue Abhod Sale on behalf of client, ex location Austria, without transport and assembly Subject to errors in description and price Optional transport and loading by us possible To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty given for used machines; the sale is governed by “purchased as seen” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: novo, Leto izdelave: 2024, MULTILAME ANGOMAC SOLID PASSAGE WIDTH: 600 MM MAXIMUM CUTTING HEIGHT: UP TO 120 MM Kodpfx Aeh Ia Upobhjnd MAXIMUM CUTTING WIDTH: 480 MM

Stanje: novo, Thread Diameter: M6 - M24 mm Speed: 200 rpm Radius: 1200 mm Adjustable Angle: 0 - 90 degrees Machine Weight: approx. 0.4 t Required Space: approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450124SET Fast and precise threading with a freely positionable swing arm - Machine head swivels from 0 to 90 degrees - Quick-change chuck with slip clutch for safe threading with no risk of breakage - Forward/reverse operation selectable on the machine head - Thread size, speed, pitch, and thread depth adjustable via touchscreen on the swing arm - Manual mode: once the preset thread depth is reached, the spindle stops automatically; forward and reverse must be manually activated - Automatic mode: after reaching the preset thread depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes Kodpfx Ajg N Nl Dobhond Includes one each of thread tapping chucks GT24: M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame: 900 x 600 x 875 mm

Stanje: rabljeno, Leto izdelave: 2000, Debarking plant type VK 32 Kjdpswwladjfx Abhjnd !! Sale on behalf of customer !!

Stanje: novo, No. 3183 Vacuum Dryer / Drying Chamber ISVE ES 3 / NEW New machine, delivery time 120 days Technical Features: Stainless steel AISI-304, partially insulated Outer diameter: 1300 mm Length of cylindrical section: 5000 mm Length of dryer: 5900 mm Total length of dryer with rails: 11000 mm Max. Operating vacuum: -730 mm Hg Knjdpfx Abju Tipkshod Wood stack length: 5000 mm Wood stack width: 800 mm Wood stack height: 790 mm Net wood volume: approx. 2.5 m³ Installed electrical power: 8.80 kW Average hourly power consumption: 4.4 kW/h Included: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0.695 kW) - 1 oil vacuum pump (65 m³/h / 1.8 kW / 380 V AC) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan, each 0.37 kW 380 V AC) - 2 check valves (one ¾” for vacuum circuit, one ½” for condenser drain) - 1 solenoid valve for air recirculation (24 V AC: one 1” for autoclave and one ½” for condenser) - 1 manual air recirculation (1” ball valve) - 1 electrical control (Siemens S7-1200 PLC type, with touch panel) - 1 ISVE Server Connect for remote maintenance and control - 2 wireless moisture probes (dual sensors for core and surface moisture measurement) - 1 wireless temperature probe (for core wood temperature measurement) - 2 plate holders - 1 operating manual (in English with CE certificate and circuit diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm (LWH) Weight approx. 2000 kg Technical data, year of manufacture, and scope of delivery according to manufacturer, subject to change without notice Subject to prior sale Warranty conditions of the manufacturer apply to new machines Images and videos are for example purposes only and do not represent the actual scope of delivery Terms of payment: All prices plus VAT, payment prior to collection or shipping Delivery conditions: Ex works

Leto izdelave: 1999, Stanje: rabljeno, The DSG 200 vertical sawmill is the ideal choice for woodworking shops specializing in furniture and wooden flooring production, offering high efficiency and reliable performance in daily operations. The used Wintersteiger mini band saw for wood is a very good investment—its major advantage over standard machines of this type is its compact footprint, while still excelling in material processing. It is designed for splitting individual elements and sizing them to the required dimensions. Operation of this machine is not particularly complicated and can be mastered quickly. The main advantage of our sawmill is its comprehensive equipment, most notably the saw blade lubrication system, controlled from the panel, which enables precise cutting of wet material. It features independent upper roller height adjustment for quicker cutting height changes. A pneumatic feed pusher supports material feed. TECHNICAL DATA: - Total power: 27.3 kW - Air Jet system motor: 2.3 kW - Siemens control panel - Feed rate: up to 2 m/min - Saw frame stroke: 210 mm - 400 strokes per minute - Cutting height, steplessly adjustable on our frame: 45–250 mm - Maximum achievable cutting height: 400 mm - Cutting width with lateral pressure: 80–205 mm - Minimum block length: 250 mm - Lamella thickness from 1.5 mm (depending on wood type and cutting height) - Saw kerf: 0.9–1.1 mm depending on cutting height - Length: approx. 5000 mm - Width: approx. 1300 mm - Height: approx. 2600 mm Kodpetvm Hdofx Abhend - Weight: 5000 kg Pneumatic feed pusher included Supplied with the machine: - complete large saw blade frame - small saw blade frame - frame pins - frame tensioning wedges - saw blade spacers - wet-cutting saw blades - dry-cutting saw blades - set of upper transport rollers - 4 lower transport rollers - complete set of slides - frame yokes - pocket cutting guides - loading magazines - DTR documentation - electrical diagram

Stanje: rabljeno, Leto izdelave: 2004, Used APV Anhydro PSD 52 stainless steel (AISI 316) spray dryer. Maximum drying capacity of water evaporation: 9.3 kg/h at a maximum air temperature of 350°C. The drying chamber has a diameter of approx. 1000 mm, straight side height of 700 mm, and a conical bottom height of 1100 mm. Includes (1) rotary atomizer CMT model AF07 powered by an IBAG motor with 0.7 kW output, wheel diameter 63 mm, speed range 10,000–60,000 rpm. Also equipped with a 12 kW electric air heater, cyclone with container for dry product, fan, and main switchboard with integrated control panel. Knsdpjuk Ehxjfx Abhjd

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Knsdpfohw Ng Iex Abhod "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit