Byvention 3015 nakup rabljenega (258)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 15.000 h, model krmilnika: BySOFT, laserska moč: 2.200 W, potovalna razdalja osi X: 1.562 mm, pomik osi Y: 772 mm, pomik po osi Z: 100 mm, TEHNIČNI PODATKI Pomik osi X: 1.562 mm Pomik osi Y: 772 mm Pomik osi Z: 100 mm Nedjy D Ikljpfx Agxjla Debelina materiala železo: 15 mm Hitri pomiki X-Y-Z: 100 - 100 m/min Delovno območje: 1.500 x 3.000 mm PODROBNOSTI O STROJU Krmilna enota: BySOFT Laserski vir: Bylaser 2200 Moč laserja: 2.200 W Teža: 13.500 kg Delovnih ur: 15.000 h

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC laserski rezalni stroj Bystronic. Moč laserja: 2200 W, največje dimenzije pločevine X/Y: 3000 mm/1500 mm, hod X/Y/Z: 1562 mm/772 mm/100 mm, največja debelina materiala jeklo/nerjavno jeklo/aluminij: 8 mm/6 mm/4 mm, natančnost pozicioniranja: +/-0,1 mm, sočasna hitrost: 140 m/min, nosilnost podajalne mize/rezalne mize: 300 kg/80 kg. Dimenzije stroja X/Y/Z: cca 6250 mm/6000 mm/2150 mm, dimenzije laserja X/Y/Z: cca 1900 mm/950 mm/1250 mm, teža: cca 13.500 kg. Vključen kombiniran hladilno-filtrirni sistem WKL 300-F. Na voljo dokumentacija. Ogled na lokaciji je možen. Njdpfx Asxx Ud Sjgxjla

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 3.000 h, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area: 3000 x 1500 mm High-pressure pump Ecotron 40.37, year 2013 Water softening unit, year 2018 --> as new Abrasive backflushing system, year 2013 ABUS pillar jib crane, 2t, year 2018 --> as new Devo-Tech vacuum lifting system, load capacity 1800 kg --> as new Various accessories, several sandbags The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet unit and pump were completely overhauled by the supplier at the time. Unfortunately, the cutting unit has seen very little use in our facility. It was only operated for a few hours per year. It has not been used since around July 2025. The high-pressure pump has a defect. It is not sealing properly and is leaking water. Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, pump repair would cost approx. CHF 5,000.– to 6,000.–. The crane and vacuum lifting system can also be purchased separately. Please submit your offer with price expectations. The original new price for the crane and vacuum unit in 2019 was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Nlsdpoyq Rdyofx Agxja Please send inquiries or offers by email only, not by phone.

Stanje: novo, Leto izdelave: 2024, Condition: new Year of manufacture: 2024 Stock number: 2517 Delivery time: prompt, subject to prior sale Country of origin: Germany Price: €36,720 Lease rate: €701.35 Available in stock: 1 Working area: 1500 x 3000 mm Plasma power source: Hypertherm Powermax 125 Max. sheet thickness - mild steel: 25 mm Max. sheet thickness for piercing - mild steel: 25 mm Max. sheet thickness for separation cut: 57 mm Recommended sheet thickness (unalloyed steel): 25 mm Current: 125 A Rapid traverse speed: 24 m/min Repeatability: 0.1 mm Max. table load: 400 kg/m² Length: 3560 mm Width: 1960 mm Height: 1500 mm Weight: 650 kg DEMONSTRATION MACHINE Compressed air operated plasma source HYPERTHERM Powermax 125 Nledpewva Iajfx Agxsa CNC workbench software (external PC not included) Automatic height control via arc voltage Setup laser Precision profile rail guide (HiWin) Backlash-free HTD timing belt Driven by stepper motors Robust frame construction Individually replaceable support grates Water tray as spark catcher Manual control for convenient positioning and setup at the workpiece Operating manual in GERMAN Equipment as per CE regulations INCLUDES THE FOLLOWING OPTION: Extraction bridge (prepared for extraction, DN160mm)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 3.070 mm, pomik osi Y: 1.550 mm, obremenitev mize: 920 kg, Prednosti stroja Nodpey Eytnefx Agxola Tehnične prednosti stroja • Laserska moč: 6,3 kW • Resonator: ensis 6000 • Pozicionirna hitrost: 170 m/min • Obratovalni čas: 19.588 h / čas rezanja: 10.631 h Dodatne informacije Stroj je še vedno pod napetostjo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 1.197 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840D SL, laserska moč: 6.000 W, potovalna razdalja osi X: 3.100 mm, pomik osi Y: 1.525 mm, število osi: 3, This 3-axis HGTECH Marvel 6000-3015 fiber laser cutting machine was manufactured in 2022. It offers a working area of 3000 x 1500 mm. The machine is equipped with a Siemens SINUMERIK 840D SL CNC controller and an automatic pallet changer for enhanced productivity. If you are looking for a high-quality cutting machine, consider the HGTECH Marvel 6000-3015 that we offer for sale. Please contact us for further details. • Working area: 3000 x 1500 mm Nodpfx Ajy Egwajgxela • Drive system: Gantry drive • Transmission: Rack and pinion • Control panel: Touch color display • Motors and drives: Siemens motors and drive modules • Cutting head: Precitec ProCutter (compact/lightweight, autofocus lens, distance sensor) • Laser source: external solid-state Raycus fiber laser • Laser output: single fiber (one LLK output) • Positioning: laser diode • Sheet detection: outer edge recognition • Nozzle cleaning: automatic • Work area lighting: integrated • Status indicator: machine status light • Scrap system: pull-out drawers, right side • Electrical cabinet: with interior lighting • Electrical connection: 380 V, 3-phase, 50 Hz, 100 A Additional equipment • Cooling system: chiller unit • Pallet system: automatic pallet changer (longitudinal) • Extraction system: multi-chamber extraction Note: The laser power is listed twice with different values (4000 W and 6000 W). Please confirm the correct specification.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, Bystronic Bystar 3015 ploščati CO² laser + Bytrans Cross 3015 (avtomatizacija pločevine) Laserski medij: CO2 Premer laserja: 20 mm Moč laserja: 4,4 kW Mere stroja (D/Š/V): 9500/6500/3500 (Doldson odsesavanje) Dolžina in širina mize: 3000/1500 Rezno območje -x/-y: 3000/1500 Debelina pločevine - jeklo: 25 mm Debelina pločevine - nerjaveče jeklo: 20 mm Debelina pločevine - aluminij: 12 mm Obratovalne ure stroja: 106.367 h Obratovalne ure laserja (pobuda modula): 73.725 h Obratovalne ure žarka: 50.873 h Vključno z: Odsesavanje Depro 6-SPRK Resonator Bylaser 4400 Hladilna enota WKL 430 Vmesna prodaja, spremembe in napake pridržane! Nlodpfoyztchsx Agxea

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, laserska moč: 4.400 W, Oprema: dokumentacija / priročnik, CNC Laser Cutting System Bystronic ByAutonom 3015 4400 Watt with BytransCross/BytransLine Automation X Maximum working area: 3000 mm Y Maximum working area: 1500 mm Z Maximum working area: 80 mm Control: ByVision Laser Power: 4400 Watt Maximum sheet thickness (mild steel): 25 mm Maximum sheet thickness (stainless steel): 20 mm Maximum sheet thickness (aluminium): 12 mm 1 Base Machine 1.1 ByAutonom 3015; ByLaser 4400 1.2 Shuttle table system with 2 interchangeable tables 1.3 Integrated control cabinet 1.4 ByVision 1.5 Operation and comfort 1.6 Touchscreen with ByVision user interface 1.7 Condition Messenger 1.8 Maintenance Messenger 1.9 Restart Manager 1.10 System Manager 1.11 ByHand 1.12 Cutting Parameters Assistant 1.13 Uninterruptible Power Supply (UPS) 1.14 Laser plasma cutting of thick materials 1.15 Cutting bridge 1.16 Cutting head with 5" and 7.5" lens cartridges 1.17 Collision detection 1.18 Automatic nozzle centering 1.19 Regulated pulsed piercing 1.20 Bypos CO₂ 1.21 Cut Control 1.22 Lens protection 1.23 Nozzle cleaning 1.24 Scanning 1.25 ByLaser 4400 1.26 Magnetically suspended compressor 1.27 Power saving mode 1.28 Output coupler protection 1.29 Interface to automation/handling 1.30 ByLaser 4400 chiller 1.31 Laser gas premix 1.32 Operator protection in cutting area 1.33 Operator protection in loading/unloading area 1.34 Voltage 400V / 50Hz 1.35 Electrical connection (machine incl. laser source) 1.36 Electrical connection for laser source dehumidifier 1.37 Compressed air (machine incl. laser source and chiller) 1.38 Material specification 1.39 Part tolerances and cut surface quality 1.40 Assist gas supply and gas quality 1.41 Ambient conditions 1.42 Structural requirements 1.43 System documentation 2 Machine Accessories 2.1 Laser source position 270° 2.2 Fully enclosed housing/roof 2.3 Parts and cross conveyor in cutting area 2.4 Extraction system with drum adaptor: 3000 (200l/55gal drum) 3 Value Packages 3.1 Kit with lens cartridge and nozzle changer Nljdpfsyzl Uijx Agxsa 3.1.1 Automatic nozzle changer (kit) 3.1.2 Automatic lens cartridge changer (kit) 4 BytransCross/BytransLine 4.1 BytransCross 3015 including: - 2 manually operated sheet tables - Sheet separation with double-sheet detection 4.2 Surcharge for electrically powered sheet table

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, 10,000 Watt Fiber Laser with only approx. 3,000 cutting hours Upgrade: New laser cutting head scheduled for 05/2025 Available immediately Manufacturer: BYSTRONIC Model: BySmart Fiber 3015 Year of manufacture: 2022 Sheet format: Large format; 3,000 x 1,500 mm Operating hours: Cutting hours approx. 3,000 h; Total operating hours: approx. 9,000 h Maximum cuttable sheet thickness: Steel: 30 mm Stainless steel: 30 mm Aluminum: 30 mm Brass: 15 mm Copper: 12 mm Special equipment: - Automatic nozzle changer with 64 positions - Detection Eye - Beam Shaper - Netbox (router) - Second high-pressure cutting gas channel - Preparation for N2 generator - Extraction system with drum - Control cabinet position: top left - Upgrade to latest Bystronic laser cutting head in 05/2025 Technical data: - Cutting area: (X) 3106 mm, (Y) 1582 mm, (Z) 100 mm - Max. axis-parallel positioning speed: X/Y 100 m/min - Max. simultaneous positioning speed: 140 m/min - Bidirectional repeatability of axis positioning: R (according to ISO 230-2:2014) 0.05 mm - Average bidirectional positional deviation per axis: M (according to ISO 230-2:2014): 0.1 mm - Edge detection accuracy: +/- 0.5 mm - Max. workpiece weight: 1100 kg - Max. permitted workpiece weight on both shuttle tables: 1850 kg - Fiber 10000 laser source with 10 kW laser output (adjustable range: 1000-10000 Watts) - Table changeover time: 27 seconds - Total electrical consumption (including extraction, cooling unit): * 18 kW (average) - Machine weight (without extraction, cooling unit): 11,800 kg - Machine dimensions: Length approx. 10,495 mm, Width approx. 6,903 mm, Height approx. 2,880 mm Standard equipment: - Spot Control - Crossjet - Collision detection - Automatic nozzle centering Nedpfx Agsywk Hcjxela - ByPos Fiber - Cut Control Fiber - Piercing Jet - Nozzle cleaning - Laser diode pointer - Scanning - Cutting bridge - Shuttle table - Laser source - Cooling unit - Tank heating - Machine control and operator interface - Uninterruptible power supply - Condition Messenger - Maintenance Messenger - Cutting plan editor - Restart Manager - System Manager - OPC Interface Cutting - Handheld control unit - Voltage 400V / 50Hz - Electrical connection - Compressed air (machine, laser source, cooling unit, extraction, cutting gas) - Material specification - Environment This used machine can be inspected under production conditions. All details are subject to change – sale excluding any warranties or guarantees. Subject to prior sale.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, laserska moč: 8.000 W, potovalna razdalja osi X: 3.070 mm, pomik osi Y: 1.570 mm, pomik po osi Z: 130 mm, skupna masa: 14.000 kg, skupna višina: 2.250 mm, največja dolžina izdelka: 10.500 mm, število osi: 3, This 3-axis LVD Phoenix FL 3015 was manufactured in 2019 and is equipped with an 8 kW IPG laser source, capable of processing sheet formats up to 3000 × 1500 mm. It features a fast positioning speed of 140 m/min and can handle a maximum sheet weight of 900 kg. If you are looking for high-quality cutting capabilities, consider the LVD Phoenix FL 3015 machine that we are offering for sale. Contact us for further information. • Laser source: IPG • Maximum sheet size: 3000 × 1500 mm • Positioning speed (X-Y): 140 m/min • Positioning accuracy: ±0.050 mm/m • Repeatability: ±0.025 mm • Maximum sheet weight: 900 kg • Electrical consumption: 28.1 kW/h • Compressed air consumption: 30 Nm³/h • Cutting gases: Oxygen (O₂) / Nitrogen (N₂) Nlodpfx Agsx S Sklsxsa • Gas pressure: min. 12 bar - max. 32 bar • Ground resistance: < 10 Ohm Additional equipment • Interface for external automation system LM4400 • Automatic nozzle changer LM5130 • Automatic cleaning device LM5600

Stanje: novo, Leto izdelave: 2025, Dolžina mize 3050 mm Širina mize 1530 mm Gorilniške glave 1 Hod 350 mm Hitrost 140 m/min - Nova naprava - - Vlaknovi laserski rezalni stroj - - 6 kW RAYCUS - s krmiljenjem Cypcut FSCUT 4000E, CYPNEST offline programska oprema, vlaknovi laserski rezalni vir RAYCUS, brezžična CNC ročna enota, dvo-stopenjska menjalna miza, izvlečne predale v mizi, euèinkovito odsesavanje dima, spremljanje rezalnega prostora in mize preko kamere, LEUZE svetlobna zavesa in THK linearna vodila * Za več informacij o natančni serijski opremi Nlsdpfx Agjwp Ta Nsxea in razpoložljivih možnostih obiščite našo spletno stran ali nas pokličite neposredno *

Stanje: rabljeno, Leto izdelave: 2018, Odlični Bystronic vlaknasti laser z 8000W laserske moči in avtomatizacijo ByTrans Cross. Ogled možen po dogovoru. Razpoložljivost: avgust–september 2026 Delovne mere: 3000 x 1500 mm Izhodna moč laserja: 8000W Nodpfsy Eqk Isx Agxsla Obratovalne ure: 32.249 Ure rezanja: 11.594 Avtomatizacija: ByTrans Cross

Stanje: dober (rabljeno), Leto izdelave: 2012, Stroj je v dobrem delovnem stanju. Njdpfx Aeylx Hrsgxsla

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, obratovalne ure: 57.467 h, številka stroja/vozila: 30003596, stopnja avtomatizacije: polavtomatski, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: Bystronic, model laserskega vira: Bylaser 4400, laserske ure: 57.467 h, laserska moč: 4.400 W, dolžina mize: 3.000 mm, širina mize: 1.500 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, moč: 62 kW (84,30 KM), vhodna napetost: 1.200 V, vhodni tok: 125 A, vhodna frekvenca: 50 Hz, Oprema: CE označba, Bystar 3015 – laserski rezalni stroj Bystronic. Vsa vzdrževanja so bila pravilno izvedena s strani Bystronic in so aktualna. Stroj je pripravljen na uporabo in še vedno obratuje. Vključno z avtomatizacijo Bytrans 3015 (letnik 2006). Vključuje hladilni sistem. Vključuje filtrirni sistem. Vključuje rezalne glave 5" in 7,5". Vključuje dodatno opremo, kot so leče, šobe ipd. Nodpfxoyxcvfs Agxela

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, Maks. velikost mize: 3000 x 1500 mm Vlakenski laser 3 kW Maks. debelina materiala: Ogljikovo jeklo: 20 mm, Nerjavno jeklo: 12 mm, Aluminij: 12 mm, Baker: 6 mm Natančnost: Ponavljalna natančnost ±0,05 mm Nlsdsyr N Uaepfx Agxsa Čas menjave plošče: 27 s Ure rezanja: 15400 h Dolžina: 10495 mm Širina: 6903 mm Višina: 2880 mm Teža: 13000 kg

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 18.000 h, številka stroja/vozila: 10054065, vrsta upravljanja: CNC krmiljenje, model krmilnika: ByVision, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Raytools, model laserskega vira: Maxphotonics, laserske ure: 18.000 h, laserska moč: 6.000 W, dolžina mize: 3.000 mm, širina mize: 1.500 mm, moč: 6 kW (8,16 KM), leto zadnje generalne obnove: 2025, Proizvajalec: Bystronic Model: BySprint Fiber 3015 6000 W Leto izdelave: 2014 Obratovalne ure: cca 18.000 h Rezalne ure: cca 4.000 h Serijska številka: 10054065 Stroj je bil v celoti servisiran in nadgrajen z novim laserskim virom, kar je povečalo moč z 2 kW na 6 kW. Podjetje: Laser Inženjering d.o.o. Moč laserja: 6000 W (Maxphotonics) Delovno območje: 3000 × 1500 mm Največja pozicijska hitrost: 140 m/min Pospešek: do 1,2 g Natančnost pozicioniranja: ± 0,1 mm Čas menjave mize: 10 sekund Teža stroja: 8.900 kg Oprema: • Dvojni sistem za menjavo palet • Popolnoma zaprta zaščitna kabina • CNC krmilnik ByVision Nodpfxoyr S N Tj Agxjla • Rezalna glava Raytools • Odsesovalni sistem Donaldson DFPRO 4000 (4000 m³/h) • Hladilnik za vlaknasti laserski vir • UPS napajalnik • Samodejna izbira rezalne tehnologije • Sistem zaznave trkov • Piercing Jet • Skenirni sistem Stroj je pripravljen za obratovanje in omogoča visoko produktivnost ob nizkih obratovalnih stroških. Možna menjava / kompenzacija.

Stanje: pripravljen za uporabo (rabljen), For sale is a CNC laser cutting system manufactured by Amada Co., Ltd., model PROMECAM / FO-3015 NT, equipped with the automatic loading and unloading system ASLUL 300 FO Tower. This is a highly productive industrial system for automated sheet metal processing, including an integrated tower storage system with automatic material handling for efficient production processes with minimal manpower. Technical data – CNC Laser Cutting System AMADA PROMECAM 3015 NT with ASLUL 300 FO Tower Base Machine – Laser System 3015 NT Machine Type: CNC Laser Cutting System (CO₂ Laser, Flying Optics) Manufacturer: Amada Co., Ltd. / AMADA PROMECAM Model: FO-3015 NT Control: AMNC-F CNC touchscreen Laser Technology: CO₂ laser, flying optics system Laser Power Laser Output: 4,000 W Laser Resonator: Fanuc AF 4000 Laser Principle: CO₂ silent discharge Consistent Output ± 1% Working Area X-axis: approx. 3,070 mm Y-axis: approx. 1,550 mm Z-axis: approx. 100–200 mm Max. sheet size: approx. 3,000 × 1,500 mm Max. workpiece weight: up to approx. 920 kg Typical Cutting Capacity Mild steel: up to approx. 20 mm Nlodpfx Agjyk S Rzjxea Stainless steel: up to approx. 15 mm Aluminum: up to approx. 10 mm Material thickness generally: 0.5 – 20 mm (depending on material and laser power) Axes & Dynamics 3 CNC axes: X, Y, Z Positioning accuracy: ± 0.01 mm Repeatability: ± 0.005 mm Positioning speed: up to 120 m/min per axis Simultaneous speed: up to 169 m/min Machine Construction Flying optics system Heavy-duty cast frame for high stability Automatic pallet changer (dual-table system) Automatic cutting head tracking Capacitive cutting head Power Supply Connection: 400 V Total power consumption: approx. 70 kVA Compressed air requirement: approx. 6 bar Machine Dimensions & Weight Machine weight: approx. 11,000 kg Dimensions: approx. length 6,700 mm x width 4,400 mm x height 2,100 mm ASLUL 300 FO Tower System – Automatic Sheet Storage System: automatic loading/unloading with tower storage Max. sheet size: 3,050 × 1,525 mm Max. pallet weight: up to 3,000 kg Number of pallets: multi-level automatic storage system Pallet changing time: approx. 55 seconds Functions: automatic loading and unloading automatic material handling automatic pallet change finished parts handling integration into automated production lines Equipment: - Flying optics laser system - Automatic shuttle pallet changer - CNC control AMNC-F - ASLUL 300 FO Tower system - automatic material handling - suitable for industrial series production fully automatic operation possible extremely high productivity reduced setup times minimal manpower required Condition: Used, technically tested, fully functional System can be demonstrated and is immediately ready for operation Delivery time: by arrangement Delivery terms: ex site, loaded free of charge Disassembly/transport/reassembly can be organized

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, Laser Bystronic Njdsydq Hnepfx Agxjla

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 6.000 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, proizvajalec krmilnikov: Fanuc, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: Fanuc, laserske ure: 6.000 h, laserska moč: 2.500 W, najv. debelina jeklene pločevine: 16 mm, maks. debelina pločevine iz nerjavečega jekla: 10 mm, maks. debelina aluminijaste pločevine: 6 mm, LVD LASER ORION 3015 PLUS - 2,5 kW Leto izdelave: 2013 Njdoy Av Nmspfx Agxola

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Bystronic Bysprint Pro 3015 je bil izdelan leta 2012. Opremljen je z BYSTRONIC ByLaser 4400 CO2 laserjem, CNC krmilnikom BYSTRONIC ByVision in nakladalnikom pločevine BYSTRONIC Byloader 3015. Če iščete visokokakovostne rezalne zmogljivosti, razmislite o stroju Bystronic Bysprint Pro 3015 iz naše ponudbe. Za več informacij nas kontaktirajte. Vrste uporabe Rezanje Nlsdpfsx Rpd Hjx Agxea

Stanje: novo, Leto izdelave: 2024, Fiber Laser Cutting System FLV-3015-OT-6022 3kW / VF1530-3000W Nledpfx Ageh Hfldjxoa Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Maximum speed: 60,000 mm/min - Maximum acceleration: 0.7 G - Maximum load capacity: 1200 kg - Power output: 3.0 kW - Source brand: Raycus or MAX Photonics (selectable) - Power supply: ~3x400 V 50 Hz - Protection rating: IP54 Cutting Thickness - Carbon steel: recommended thickness up to 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness up to 8.0 mm, maximum thickness 10.0 mm - Aluminium: recommended thickness up to 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness up to 5.0 mm, maximum thickness 6.0 mm Construction Thanks to its welded design, the machine offers outstanding stability. Japanese Fuji servo drives ensure high speeds with excellent precision. Tube Laser This machine is equipped with a tube cutting module. - Maximum workpiece length: 6000 mm - Clamp diameter: 220 mm Automatic lubrication system for axis guides. User Convenience Loading heavy sheets is simplified by built-in transport balls, ensuring smooth gliding during loading. Picking up small finished parts is also easy thanks to collection trolleys under the machine, which can be pulled out using a practical handle. RayTools Autofocus Cutting Head Option – Otinus Protect This product provides dedicated protection for your laser source. With this service, you ensure your business continuity remains safeguarded. We secure your operations so you can deliver orders on time. Option – Voltage Stabilizer Control Panel Runs on Windows with CypCut software, offering features such as design, file import/export, and work optimization. All installed software comes with lifetime licenses. The machine comes with a wireless controller. Professional Support We maintain regular contact with our customers. For each machine purchased, we add an Otinus Specialist Assist hours package. Otinus Academy Learning Software With your purchase, you will get one year of access to online courses for training new employees or refreshing your skills from previous training sessions. Free Drawing Package Every Otinus laser cutting machine includes a set of ready-to-use CAD drawings. Scope of Delivery 3-day training and machine installation - Day 1 and 2: up to 8 hours – commissioning and training on machine control - Day 3: up to 8 hours – independent operation of the machine under supervision of our technician, including custom programming of specific parts Consulting by our specialists - By phone: from 7:30 to 21:00 (Mon-Sat) – 8-hour package to be used within 12 months - Online: from 7:30 to 14:30 (Mon-Fri) – 8-hour package to be used within 12 months Access to Otinus Academy online courses - LibreCad – access valid for 12 months Additionally, you will receive: - CAD drawing package

Stanje: novo, Leto izdelave: 2024, Fiber Laser Cutting System FLV-3015-OE 1.5kW / VF1530-1500W Technical Parameters - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Maximum speed: 40,000 mm/min - Maximum acceleration: 0.5 G Nedpfx Agephm Sloxola - Maximum load capacity: 1200 kg - Power output: 1.5 kW - Energy requirement: 12.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 - Length: 4500 mm - Width: 2300 mm - Height: 1920 mm Cutting Thickness - Carbon steel: recommended thickness 12.0 mm, max. thickness 16.0 mm - Stainless steel: recommended thickness 5.0 mm, max. thickness 6.0 mm - Aluminum: recommended thickness 3.0 mm, max. thickness 4.0 mm - Brass: recommended thickness 2.0 mm, max. thickness 3.0 mm Construction - Type: welded frame - Number of support legs: 8 - Servo drives: Schneider - Gearboxes and racks: helical gears - Linear guides: HIWIN - Gearbox: Motovario - Rack: YYC - Ball bearings: NSK - Pressure regulators: SMC - Cooling: Water chiller Automatic lubrication system for axis guides. User-Friendly Operation Loading heavy sheets is facilitated by built-in transporter balls to ensure smooth sliding during loading. The collection of small finished parts is also simplified by trays under the machine, which can be pulled out using a convenient handle. RayTools cutting head with autofocus Option - Otinus Protect This product provides customized protection for your laser source. With this service, you ensure your business continuity is safeguarded. We secure your business so you can complete your orders on time. Control Panel The computer is equipped with Windows and the CypCut software, offering functions such as design, file import/export, and work optimization. Installed programs include lifetime licenses. The machine comes with a wireless controller. Expert Support We maintain constant communication with our customers. Therefore, with every machine purchased, we include a support hours package from Otinus Specialist Assist. Otinus Academy Learning Software With the purchase of this equipment, you receive one-year access to online courses for training new staff or refreshing your knowledge from previous training sessions. Free Drawing Package Every Otinus laser cutting machine comes with a package of ready-to-use CAD drawings. Included in the Price of the Machine 2-day commissioning and operator training - Day 1, up to 8 hours – commissioning and control explanation. - Day 2, up to 8 hours – independent work on the machine under supervision of our technician, including the option of programming customer-specific parts. Expert Consultation - By phone: 7:30 am to 9:00 pm (Mon-Sat) – 8-hour support package valid for 12 months. - Online: 7:30 am to 2:30 pm (Mon-Fri) – 8-hour support package valid for 12 months. Access to online training courses - LibreCad – 12 months access Additionally, you receive - CAD drawing package

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: Special offer applies only to customers who participated in a demonstration before purchase – in the Otinus machine showroom in Bydgoszcz. Fiber Laser Cutting Machine “FLV-3015-C2 3kW / VF1530-3000W” Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - X and Y axis repeatability: ±0.03 mm - Maximum speed: 120,000 mm/min - Maximum acceleration: 1.5 G - Power output: 3.0 kW - Source brand: Raycus or “MAX Photonics” (selectable) - Power supply: ~3×400 V, 50 Hz - Protection class: IP54 Cutting Thickness - Mild steel: recommended thickness – 20 mm, maximum thickness – 22 mm - Stainless steel: recommended thickness – 8 mm, maximum thickness – 10 mm - Aluminium: recommended thickness – 6 mm, maximum thickness – 8 mm - Brass: recommended thickness – 5 mm, maximum thickness – 6 mm Construction The machine features exceptional stability thanks to its welded structure on robust legs. High traverse speeds and precision are ensured by Japanese Fuji servo drives, working on heavy-duty linear guides, racks, and helical gears. The ABLS system automatically replenishes lubricant in the axis guides. RayTools cutting head with autofocus Control Panel The fiber laser cutting system is operated via a control panel consisting of a monitor, mouse, and keyboard for user convenience. The integrated computer is equipped with Windows 10 and CypCut software, offering the following functions: - Drawing creation - File import/export - Performance and cutting speed optimization All installed software comes with lifetime licenses. Wireless Controller The laser head is controlled using a wireless controller. Safety The fiber laser cutting machine is equipped with all essential safety features and accessories for operator protection. Additional safety is provided by an emergency warning light with acoustic signal, which activates in hazardous situations to alert the operator. Free Drawing Package Each Otinus laser cutting machine comes with a comprehensive CAD drawing package. The included designs are ready to use and can be cut in any chosen format. Our technician will demonstrate how to use them during training. Technical Consultation Our specialists will help you select the appropriate machine and accessories prior to purchase – on the basis of technical drawings of your required parts. Included in the machine price 2-day commissioning and operator training - Day 1 (up to 8 hours): commissioning and control instructions. - Day 2 (up to 8 hours): independent operation under supervision of our technician – including the option to program customer-specific components. Professional Consultation - By phone: 7:30–21:00 (Mon–Sat) – 8-hour package, valid for 12 months. - Online: 7:30–14:30 (Mon–Fri) – 8-hour package, valid for 12 months. Access to online learning courses - LibreCAD – 12 months’ access Additionally included - CAD drawing package Nsdpfsh Hfgyex Agxjla

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 5.375 h, Funkcionalnost: popolnoma funkcionalen, MAZAK OPTIPLEX NEXUS 3015 FIBER - 4 kW Wycinarka laserowa CNC Fiber Cena: 190 000 EUR netto Stan: Używana – BARDZO MAŁO PRZEPRACOWANYCH GODZIN Rezonator: IPG YLS-4000 U BARDZO NISKI PRZEBIEG Maszyna ma wyjątkowo niski przebieg godzinowy. Rezonator IPG oraz kluczowe podzespoły zachowane są w stanie zbliżonym do fabrycznego: - Praktycznie pełna żywotność rezonatora IPG (trwałość do 100 000 h) - Znikome zużycie układu optycznego, głowicy Multi-Control Torch 2.1 oraz prowadnic osi - Jakość i dokładność cięcia porównywalna z nową maszyną - Dokładny przebieg potwierdzony odczytem z CNC – dostępny na życzenie i podczas inspekcji DANE TECHNICZNE Model: Optiplex Nexus 3015 Fiber Typ lasera: laser światłowodowy Ytterbium Rezonator: IPG YLS-4000 U Moc lasera: 4,0 kW Maks. format blachy: 1 525 x 3 050 mm Maks. obciążenie palety: 930 kg Przejazdy X / Y / Z: 3 100 / 1 580 / 150 mm Prędkość szybka X/Y: 60 m/min (85 sumarycznie) Napęd X1/X2/Y: zębata, bezpośrednia przekładnia Napęd Z: serwo, śruba kulowa Dokładność X/Y: +/- 0,05 mm / 500 mm Powtarzalność: +/- 0,03 mm Głowica: Multi-Control Torch 2.1, F125-F200 mm Gazy asystujące: O2, powietrze, 3. gaz; 0,02-2,5 MPa CNC: Mazatrol Preview G, ekran dotykowy 19'' Zmieniacz palet: automatyczny, 2-palety Waga: ok. 12 850 kg Zasilanie: 380-480 V, maks. 18 kW MOŻLIWOŚCI CIĘCIA (4 kW) Stal czarna O2: 20 mm Stal czarna N2: 4 mm Stal nierdzewna N2: 15 mm Aluminium N2: 15 mm Miedź O2: 8 mm Mosiądz N2: 8 mm FUNKCJE INTELIGENTNE (W ZESTAWIE) Automatyczny zmieniacz dysz (8 pozycji), auto focus, detekcja ogniskowania, automatyczna kalibracja profili, automatyczne czyszczenie dysz, kontrola średnicy wiązki, detekcja przebicia/plazmy/przepalenia, precyzyjne rampowanie mocy, Flash Cut. WYPOSAŻENIE W CENIE Stalowa rama (nie wymaga fundamentu), CNC Mazatrol Preview G 19'', głowica Multi-Control Torch 2.1 z 8-pozycyjnym zmieniaczem dysz, moduł OPTIPOD, automatyczny zmieniacz palet 2-palety, chiller z przewodami 6 m, dysze tnące 1.2/2.0/3.0 mm + 5 adapterów, detekcja krawędzi, sterowanie ciśnieniem gazów, transformator wieloogniwowy, stół szczebelkowy (podziałka 100 mm), narzędzia, dokumentacja (PL/EN). DODATKOWE OPCJE – NIEOBOWIĄZKOWE Laser można nabyć osobno za 190 000 EUR netto. Poniższe opcje są dodatkowe. OPCJA A – ZESPÓŁ PODWYŻSZAJĄCY CIŚNIENIE – 15 000 EUR netto Umożliwia cięcie sprężonym powietrzem zamiast drogiego azotu – znacznie niższe koszty eksploatacji. Skład zestawu: 1. Kompresor SK 25 / max. 15 bar / SK.2-13318 2. Odpływ kondensatu Ultramat UFM-D03 Nledpfx Agjy Dgxujxsa 3. Ekonomizer – filtr Ultra DF 0035 - DF 1100 4. Ultra-Filter DF 0035 - DF 1100 5. Zbiornik ciśnieniowy 500 l Zakres cięcia powietrzem: stal czarna do 6 mm, stal nierdzewna do 4 mm. OPCJA B – ŻURAW DO ZAŁADUNKU BLACH – 5 500 EUR netto Żuraw/urządzenie załadunkowe, udźwig do 700 kg. Bezpieczny i szybki załadunek blach na paletę lasera. PODSUMOWANIE CEN (NETTO, EUR) Sama maszyna: 190 000 EUR Opcja A (zespół ciśnieniowy): 15 000 EUR Opcja B (żuraw): 5 500 EUR Pakiet z obiema opcjami: 210 500 EUR WARUNKI HANDLOWE - Ceny netto w EUR (bez VAT) - Ważność oferty: 30 dni - Płatność i dostawa: do ustalenia - Możliwa inspekcja i test cięcia po umówieniu terminu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 41.569 h, proizvajalec krmilnikov: AMADA, model krmilnika: AMNC 3i, laserska moč: 4.000 W, potovalna razdalja osi X: 3.070 mm, pomik osi Y: 1.550 mm, število osi: 4, This 4-axis CO2 laser cutting machine was manufactured in 2013 and features a powerful 4000 W Amada Fanuc AF4000i-c laser source. With a traverse range of 3070 x 1550 mm and a rotary index unit for tube processing, it is also equipped with the AMNC 3i control system and a pallet changer for increased productivity. If you are looking for high-quality cutting capabilities, you should consider the AMADA FO-3015 II RI machine we are offering for sale. For further information, please contact us. • Laser type: CO2 laser, AC-HF excited, fast axial flow • Laser power: 4000 Watts (continuous), 5000 Watts (peak) • Optics system: flying optics • Traverse range (X x Y x Z): 3070 x 1550 x 200 mm • Max. table load: 920 kg • Max. material thickness (mild steel): 20 mm • Positioning speed: 80 m/min (X/Y), 60 m/min (Z), 113 m/min (simultaneous) • Positioning accuracy: ± 0.01 mm / 500 mm • Repeatability: ± 0.005 mm • Control unit: AMNC 3i (21.5-inch screen) • Laser source type: AO4B-0815-B342 (YOM 2013, S/N L13X40476) • Laser stability: ± 2% • Laser gas consumption: approx. 10 l/h • Laser gas mixture: - CO₂: 5 ± 0.25% - He: 60 ± 3% - N₂: 35 ± 1.75% • Beam mode: approximately TEM₀₀ • Beam divergence: less than 2 mrad • Pulse frequency: 1 - 2000 Hz Njdpfx Aeyv Ak Dsgxola • Ambient conditions: 5 - 35°C at max. 75% relative humidity • Operating temperature: 25°C (± 1°C) • Laser wavelength: 10.6 µm • Laser gas consumption: approx. 10 l/h • Power consumption: 12-59 kW (average for the complete system) • Rotary Index (RI): Integrated tube/profile machining capability; RI unit as per documentation is included • Power supply requirement (main unit rating plate): 200 V, 50/60 Hz • Machine weight: 13,550 kg • Oscillator rating plate: Model AF4000i-C, weight 1200 kg • Main unit rating plate: Model FO3015IIRI • Last maintenance by Fanuc: January 5, 2023 • O-rings on the laser tube replaced • Internal mirrors replaced • Turbo blowers replaced Additional equipment • Pallet changer: LST3015 RI (YOM 2017, S/N 30153398) • Power supply/transformer: TG513 (S/N 987/13) • Chiller/extraction: PC5011FOm24kw (S/N 7196850001) • VPSS 3i Tube Full Solution Pack software • Steel prism table support • Rotary index tube cutting unit