Okvir Stroja nakup rabljenega (6.870)

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. Fpeded Rzc Rjpfx Abved All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: rabljeno, 50 kosov Jungheinrich MPE okvirjev, predmontirani 600 x 100 cm, rabljeni 🧰 Lastnosti izdelka • Proizvajalec: Jungheinrich • Barva: pocinkano • Stanje: rabljeno • Okvir: predmontiran 600 x 100 cm • Širina okvirja: 10 cm • Nosilnost polja: 12.000 kg 💰 Cena na okvir € 110,- neto brez DDV • Količinski popust: na zahtevo • Stroški pošiljanja: po vsej Evropi na zahtevo • Dobavni rok: takoj na voljo • Ogled in prevzem: po dogovoru kadarkoli Stalno na zalogi več kot 5.000 tm paletnih regalov različnih proizvajalcev (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter vmesne prodaje! Glejte naše Splošne pogoje, vse cene so brez DDV iz skladišča.) Fjdpfx Abjymlqaovspd

Stanje: novo, Leto izdelave: 2024, skupna višina: 2.100 mm, dvižna višina: 2.200 mm, lastna masa: 3.000 kg, nosilnost: 4.500 kg, Lifting mast for wood packages 1200 x 1200 mm, length 3000 - 6000 mm 5 lifting arms Max. load capacity: 4 t Dimensions (W x L x H): 2500 mm x 5000 mm x 2100 mm Fsdpfxor Ddbgj Abvepd Lift: 550 - 2200 mm Gear motor: 400 V, 3 kW

Leto izdelave: 2000, stanje: rabljeno, Punching machine Edel Fpodpjg Dgyxjfx Abvjd HM 35/350 BKE 200/5 Maximum pressure: 35 t Sheet thickness: 5 mm at 40 kp/mm²

Stanje: rabljeno, Pnevmatska prebijalna enota TÜNKERS ali DE-STA-CO, pnevmatski močnik Pnevmatski prebijalni okvir, prebijalni okvir, prebijalna enota Leto izdelave: 2019 Model št.: 141-1040F Št. prebijalnega okvirja: B-13-26/100 Tlačna sila: 4 t (40 kN pri 8 bar) Priklop zraka maks. 8 bar Izsev: 100 mm Širina okvira: 60 mm Premer odprtine: Ø 2–13 mm Premer odprtine (vgrajen udarec): Ø 4 mm Zunanji premer matrice: Ø 22 mm - Strgalo iz Vulkollan poliuretanskega elastomera Dimenzije D x Š x V: 280 x 110 x 480 mm Fjdpfx Abjxf Uqxevjpd Teža: 36 kg V zelo dobrem stanju

Stanje: zelo dobro (rabljeno), Mould frames, moulding boxes approx. 270 units Feded Txz Sopfx Abvjpd very good, ready-to-use condition secured on pallets and ready for transport

Leto izdelave: 2008, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10999, OPIS Mašina za dvostrano brušenje / aparat za brušenje odozgo i odozdo Proizvođač: Löwer Model: DSM 3000 sa povratkom obratka Bthgq0Ygu0 Fedpfx Aev Dfp Hebvopd Radna širina: 290 mm Debljina brušenja: 2-200 mm Najkraća dužina obratka: cca 320 mm Opremljena sa: 1x brusna jedinica odozgo, 7,5 kW 1x četkasta jedinica odozgo, 0,37 kW 1x brusna jedinica odozdo, 7,5 kW 1x četkasta jedinica odozdo, 0,37 kW Dimenzije brusne trake: 300 x 1800 mm Električno podešavanje visine, 0,37 kW Podesivo uvlačenje, 6/11/16 m/min. Priključak na komprimovani vazduh: 6-8 bara Dimenzije cca 2700 x 1100 x 1900 mm Težina cca 1600 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.150 mm, skupna širina: 700 mm, skupna višina: 1.200 mm, vhodna frekvenca: 50 Hz, Ponujamo to rabljeno stroj za predelavo mesa znamke 746 PX Deskinners, odsteklenik podjetja CRETEL. Fpedpeyr Nnmofx Abvod Za vprašanja ali dodatne informacije nam pošljite sporočilo ali nas kontaktirajte po telefonu. Neto cena: 1000 PLN.

Stanje: rabljeno, CNC control unit in operator panel / machine operator terminal Fsdpfx Aslb I D Tjbvspd CNC path control FANUC Type A14B - 0048 - Year of manufacture: 1990 - Machine control panel - Electronic handwheel - Flexible silicone PC keyboard Dimensions (WxHxD): 600 x 260 x 350 mm Weight: approx. 40 kg Removed from a GILDEMEISTER CNC lathe. From stock, functionality not tested, ideal as a source for spare parts.

Stanje: rabljeno, Measuring and Marking Plate, Steel Cast Iron with Heavy Ribbing, STIEFELMAYER From a measuring and scribing machine with manually guided measuring arm Machine No.: 8530979 Year of manufacture: approx. 1989 Length: 3000 mm Width: 1500 mm Thickness: 360 mm Working height: 690 mm Plate thickness: 70 mm continuous - Side face machined at 90° angle, 3000 x 360 mm - 6 height-adjustable leveling feet Fodpfx Asdzqpzjbvepd - Includes 1 mechanical and electrical measuring arm (not functional) Measuring range approx. X = 2350 mm, Y = 1250 mm, Z = 1300 mm Required space (L x W x H): 3000 x 2000 x 2500 mm Weight: approx. 5000 kg Very good surface condition

Stanje: rabljeno, Pneumatic Press, Compressed Air Press BOSCH Type Fodpfjh U Dtusx Abvopd Serial No.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 mm Ram area: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on metal frame with wooden panels Required space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight incl. table base: 140 kg Good condition

Stanje: rabljeno, Table unit from a DROOP & REIN portal milling machine Fodpfsthuzpex Abvepd Clamping plate with T-slots made of cast steel/grey cast iron Table unit with clamping plate and very massive guideway Table clamping area: 5500 x 2000 mm Travel of table clamping plate: approx. 3100 mm Table height / construction height: 1050 mm Table load capacity: max. 20 tons Ball screw: Ø 100 mm Lead: 20 mm (single start) - Machining table is very stably guided on the bed - Metal telescopic guideway cover - From a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots (28 mm) - Drive via SIEMENS servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Construction height: 1050 mm Net weight: 28 tons Good condition

Stanje: rabljeno, Battery change rack, transport rack, storage rack for forklift battery Change table, battery pallet, battery exchange system, battery change cart Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Fpedpfefgpfpex Abved Load capacity: 2x 500 kg per compartment = 1000 kg Compartment dimensions (W x D) per compartment: 300 x 920 mm Compartment dimensions without center bar (W x D): 655 x 920 mm Adjustment height: 80 to 200 mm - Center bar removable - Also suitable for sheet material - 16 galvanized steel rollers Ø 50 mm - 4 fixed castors Ø 100 mm, 2 of them swivel with brakes - Fixed castors individually height-adjustable via threaded rods Overall dimensions (L x W x H): 1050 x 950 x 615 mm Net weight: 85 kg Good condition

Stanje: rabljeno, Clamping plate with T-slots made of cast steel/gray cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Fedpfxoh R D Uzo Abvjpd Length: 1850 mm Width: 915 mm Plate thickness: 230 mm Table surface with T-slots: 1030 x 750 mm - Clamping surface with 22 mm T-slots, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled so the ribs rest flat and provide support - Ideal as a base plate Net weight: 1140 kg Good condition

Stanje: rabljeno, Mitre crosscut saw for aluminium (special-purpose machine construction with 4 servo motors) Circular saw, mitre saw, longitudinal cutting saw Year of manufacture: 2002 Saw blade diameter: 500 mm Cutting capacity at 90° Round: Ø 180 mm Rectangular: 350 x 140 mm (via longitudinal cut) Cutting capacity at 45° Round: Ø 180 mm Rectangular: 350 x 100 mm (via longitudinal cut) Guide rail length (base frame): 1100 mm Travel on base frame (forward-backward): 650 mm Travel on column (up-down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Controlled longitudinal cutting motion - Controlled saw blade height adjustment - Controlled mitre cut via swivelling saw aggregate - Controlled mitre cut via tilting saw aggregate Fpsdpfx Ajdzp T Dobvsd - Swivelling and tilting of the saw via INDRAMAT servo motors with precision gearbox (Motors: MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Vertical axis movement via INDRAMAT servo motors and ball screw spindles (Motor: MKDO41B-144-KP1-KN) - A total of 4 Indramat servo motors installed - Very high-quality German machine construction Space requirement (L x W x H): 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition The unit comes from a special-purpose machine for specific products. All other components and electrical parts necessary for building a new special-purpose machine are also available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, HESS drilling and hardware fitting machine. Single-unit with pneumatic clamps. Suitable for PVC and aluminium window production. Fpsdpjv H E Alsfx Abved

Stanje: zelo dobro (rabljeno), travelling steady rest Fpsdpfx Ajm Trarebvsd centre height 150 mm For details, see image (28427)

Stanje: dober (rabljeno), Izvedba s ključnim stikalom Področje uporabe: stroji Lisec Širina: 425 mm Fpjdpsyr Inljfx Abvod Višina: 160 mm Globina: 50 mm Teža: 1078 g Stanje: Dobro, rabljeno

Stanje: rabljeno, Locking frame - Frame SBB Letter Press Heidelberg SBB - 560 x 820mm Fodpfxjrffm Nj Abvopd Online video inspection via Skype video We would be very pleased to welcome your visit – more machines in stock Available immediately – can be inspected In stock in Emskirchen / Nuremberg – testing possible

Stanje: rabljeno, Locking frame – Frame OHT Letter Press Heidelberg OHT A4-24 Frame OHT Platen - 8 frames for KS cylinder - 1 frame for KSB cylinder - 2 frames for S cylinder - 4 frames for SBG cylinder - 1 frame for Adast GP platen Fpjdpfx Abjrffmzsvod Online video inspection via Skype video possible. We would be delighted with your visit – more machines in stock. Available immediately – ready for inspection. Located in Emskirchen / Nuremberg – test runs possible.

Stanje: rabljeno, Locking frame – Frame KSB Letter Press Heidelberg KSB A4-1 Frame KSB Cylinder Online video inspection via Skype video We would be very pleased to welcome your visit – more machines in stock Fpjdpsrffmwefx Abvsd Immediately available – Can be inspected In stock in Emskirchen / Nuremberg – Can be tested

Stanje: rabljeno, Locking frame - Letter Press Frame Adast GP Platen - 1 Frame Adast GP Platen Online video inspection via Skype video We would be very pleased to welcome your visit - more machines in stock Available immediately - can be inspected Fjdjrffniepfx Abvjpd In stock in Emskirchen / Nuremberg - can be tested

Stanje: rabljeno, Clamping frame – Frame SBG Letter Press Heidelberg SBG A4-4 / Frame SBG Cylinder Online video inspection via Skype-video We would be pleased to welcome your visit – more machines in stock Available immediately – Can be inspected In stock in Emskirchen / Nuremberg – Testing possible Fodsrffm Tjpfx Abvopd

Stanje: rabljeno, Frame locking device – KS Letter Press Frame for Heidelberg KS-8 Cylinder Online video inspection via Skype available We would be pleased to welcome your visit – more machines available in stock Available immediately – can be inspected Fsdpfx Asrffmtobvjpd Located at our warehouse in Emskirchen / Nuremberg – testing possible

Stanje: rabljeno, Closing frame - Frame S for Letterpress Heidelberg S A4-2, Frame S Cylinder Online video inspection via Skype video We would be pleased to welcome you for a visit – more machines in stock Available immediately – can be inspected In stock in Emskirchen / Nuremberg – test runs possible Federffm Ejpfx Abvjpd