C.m. Surface Treatment S.p.a. T18 nakup rabljenega (9.513)

Stanje: rabljeno, Leto izdelave: 2007, Prominent water treatment system, consisting of: 1. Softening: Raw water is supplied to the twin softener. Only one vessel is in operation at a time, while the other is in regeneration or on standby. In the softener, calcium and magnesium ions are replaced by sodium. The system is equipped with a volume counter, which switches to the other vessel once the preset quantity has been reached. Regeneration is carried out with brine from the brine tank. The residual hardness at the outlet is 0 °dH. 2. Reverse Osmosis: The reverse osmosis unit fills the permeate tank with demineralized water (permeate). Depending on raw water quality, water temperature, membrane condition, and correct system settings, different conductivity levels and operating pressures are achieved. Upon commissioning, the following flow rates are set: permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. Permeate Tank and Ozonation: The non-pressurized 500 l permeate tank is equipped with adjustable level control. For ozone treatment, the water in the permeate tank circulates through an adjustable ozone dosing point. Ozone is produced by the ozone generator via silent electrical discharge from air and is available as an ozone/air mixture. Air and un-dissolved ozone rise to the top of the permeate tank and are discharged via the residual ozone destructor. For monitoring, redox potential and ozone measurements are taken downstream of the centrifugal pump. Ozone dosage is set via the touch panel. Control can be selected by either redox potential or ozone concentration. Additional machine information: water softening, reverse osmosis unit, ozone disinfection Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. operating pressure: 16 bar Power: 2 A Voltage: 230 V Frequency: 50 Hz Water supply: < 5 bar (cooling water) Compressed air: 5.5–6.5 bar (max. 10 bar); max. 0.37 Nm³/h Operation/control: Simatic S7-300, touch panel Lrodpjw Uvdgefx Akhou Installation: free-standing Base frame: fully assembled on pipe frame with dished ends Equipment: reverse osmosis unit, reaction tank complete with residual ozone destructor, ozone generator, ozone gas warning device, ozone and redox transmitters, control cabinets with PLC/control system

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 15 h, High-Precision Profile Measuring Device | Excellent Condition | Ready for Immediate Use For sale is a Chotest SJ-5760P, a high-precision contour measuring instrument designed for geometric profile analysis in quality management, toolmaking, mechanical engineering, and research. The device delivers accurate measurements, offering extensive freedom of movement and a stable granite base. — Condition • Used, technically inspected • Fully functional • Very well maintained — Technical Highlights – Chotest SJ-5760P Travel Ranges • X-axis: 0–200 mm • Z-axis: 0–450 mm • Device dimensions: 800 × 450 × 1100 mm Lrsdox Db Stepfx Akhju • Weight: 220 kg — Profile Measurement (SJ-5760P) • Z1 measurement range: ±25 mm • Resolution: 0.001 µm • Measuring direction: Top / Down • Measurement speed: 0.05–5 mm/s • Positioning speed: X/Z up to 20 mm/s • Measuring force: 10–150 mN, adjustable • Guideway deviation: ≤1 µm / 200 mm Accuracy • X indication error: ±(0.5 + 0.015L) µm • Z1 indication error: ±(0.5 + 0.05H) µm • Distance: ±(0.8 + 0.02L) µm • Radius: ≤(1 + R/15) µm • Angle: ≤±45’’ — Key Features • Ideal for precise contour and profile measurements • Extremely high vertical resolution (0.001 µm) • Very stable granite base for low-vibration measuring conditions • Large travel ranges for diverse component geometries • User-friendly and reliable measurement technology • Suitable for micron-precise form measurements in laboratory and production environments

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 0 mm Total power requirement: 7.5 kW OFFER We can offer you – subject to prior sale and errors excepted – the following, available from stock: GEIBEL & HOTZ CNC Horizontal Surface & Profile Grinding Machine Model: FS 6-Z CNC Year of manufacture: 1996 Maximum grinding length (table longitudinal travel 660 mm): 600 mm Maximum grinding width (cross travel max. 360 mm): 0 mm Maximum grinding height under wheel: approx. 375 mm Distance table – spindle centre min / max: 140 / 525 mm Standard magnetic chuck size: 600 x 0 mm Table clamping area: 820 x 0 mm Maximum table load: 400 kg Table speed: m/min Cross movement / table stroke: 3 - 40 mm Rapid cross/vertical feed: 5 m/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle speeds, adjustable: 1,000 – 3,000 rpm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 15 kW – 400 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special equipment: • SIEMENS CNC Control type 840 D with comprehensive GEIBEL&HOTZ grinding software, user-friendly interface, text and graphic support, easy programming even for complex grinding wheel contours and fast linking of grinding operations • All standard grinding programs and cycles such as surface and multi-surface grinding with roughing – finishing – sparking out – return, plunge grinding, automatic dressing with compensation, etc. • Electronic handwheel for 3 axes Lredex Haryopfx Akhou • Table movement via toothed belt drive, allowing both very high and very low table speeds, ideal for profile grinding • Dressing device with swing diamond, mounted on left side of table, with automatic dressing cycle, compensation, and for profile dressing as well • Fixed dresser with interchangeable mounting, left side of table • Mounted sine table permanent electro-magnetic chuck approx. 600 x 200 mm, fine-pole • Wet grinding unit with separate band filter coolant filtration • Separate electrical cabinet, work lamp, various accessories, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice Always a large selection of grinding machines in stock – please let us know your requirements!

Stanje: rabljeno, Leto izdelave: 1996, Dolžina brušenja 1.000 mm Širina brušenja 550 mm Višina obdelovanca 400 mm Pritrdilna površina mize 1.580 x 550 mm Največja obremenitev mize 950 kg Magnetna vpenjalna plošča 1.000 x 550 mm Vzdolžni pomik mize (X-os) 1.200 mm Pomik mize 1 - 30 m/min Vertikalni pomiki: 1 - 300 mm/min os Z 470 mm Prečni pomik 1 - 2.000 mm/min Mere brusilnega koluta 400 x 100 x 127 mm Hitrost vrtenja brusilnega koluta 1.500 - 3.500 min⁻¹ Pogon brusilnega vretena 11,00 kW Skupna potreba po moči 23,00 kW Teža stroja pribl. 7,50 t Potreben prostor pribl. 4,50 x 3,20 x H2,90 m Hladilni sistem z integrirano črpalko v hidravličnem rezervoarju, Odsesavanje. Lredpfsxx A Dmjx Akhsu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1965, Dolžina brušenja 600 mm Širina brušenja 250 mm Lredpfx Akjxy S D Eohou Opis sledi!

Stanje: zelo dobro (rabljeno), Ravnalka SCM F520 Class Delovna širina: 520 mm 4-nožni valj Tradicionalni noži Elektronsko dviganje in spuščanje delovne mize Glavno vodilo nastavljivo do kota 45° Ledpfxox H S Dnj Akhjru Dolžina miz: 2700 mm CE certifikat DTR dokumentacija Leto izdelave: 2014

Stanje: rabljeno, Skobeljni in debelinski stroj Felder AD 741 Spiralna gred Glavni motor 4 kW, Dolžina miz skobeljnika 2000 mm, Širina skobljanja 410 mm, Lrsdpfx Aexxavmjkhsu Višina obdelave debelinke 230 mm, 1 hitrost podajanja, Ročna nastavitev mize debelinske skobeljnice z digitalnim prikazom višine Stroj pripravljen za delo, tih

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 40 m/min, deluje dobro! Lrsdpfeymtikex Akheu

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna širina: 500 mm, skupna dolžina: 7.000 mm, višina plošče: 600 mm, Granitni merilni nosilec proizvajalca Johannes Fischer Aschaffenburg Ledpsym R U Rofx Akhjru Dimenzije: 7000x500x600 mm Rezkanje v zgornji tekalni površini Luknje v zgornjem delu Kakovostni razred bo še preverjen (verjetno boljši kot 0 po DIN876) Dodatni posegi možni za doplačilo

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, dolžina brušenja: 3.150 mm, širina brušenja: 800 mm, obremenitev mize: 6.000 kg, moč motorja brusilnega vretena: 22.000 W, višina obdelovanca (maks.): 650 mm, Brez minimalne cene – zagotovljena prodaja ponudniku z najvišjo ponudbo! TEHNIČNI PODATKI Dolžina brušenja: 3.150 mm Širina brušenja: 800 mm Ljdpeylk E Hjfx Akhsru Najv. višina obdelovanca: 650 mm Dimenzije mizne površine: 3.150 x 600 mm Dimenzije magnetne vpenjalne plošče: 3.000 x 600 mm Dimenzije brusnega koluta: 450 x 100 x 127 mm Najv. obremenitev mize: 6 t PODROBNOSTI O STROJU Krmiljenje: SIEMENS 840D Skupna potrebna moč: 70,6 kW Moč vretena: 22 kW Mere in teža Potreben prostor: ca. 11 x 3 x 2,4 m Teža stroja: ca. 15 t OPREMA Sistem za hlajenje 2.500 l Upravljanje magnetne sile Polavtomatski uravnoteževalni sistem Opomba: Krmilnik se zažene. Brusilna programska oprema proizvajalca MININI pa se iz neznanega razloga ne naloži. Strojna oprema za krmiljenje je bila preverjena in je brezhibna. Rezervne datoteke so na voljo.

Stanje: dober (rabljeno), Transportni trak, tračni transporter, transportni pas, ploski tračni transporter, tračni transporter z vgrajenim vakumskim priključkom - Tračni transporter: Vakumska površina za sesanje transportiranega materiala Lrodpfx Ajxrnm Tekhsu - Širina traku: 150 mm - Dolžina transporterja: 770 mm - Pogonska os: Ø 30 x 150 mm - Dimenzije: glej fotografije / tehnična risba - Skupne dimenzije: 875/400/V300 mm - Teža: 60 kg

Stanje: dober (rabljeno), Transportni trak, pasovni transporter, transportni trak, pasovni transporter, ploski pasovni transporter, transportni trak z vakuumskim priključkom - Pasovni transporter: vakuumsko področje za sesanje materiala, ki se transportira - Transportni pasovi: 3 kosi, dolžina 1840 x 30 mm - Pogonska os: Ø 30 x 100 mm - Posamezne komponente: glej slike - Dimenzije: 1840/570/H285 mm - Teža: 129 kg Ledpexu Ehysfx Akhjru

Stanje: dober (rabljeno), Transportni trak, tračni transporter, transportni pas, ploščati tračni transporter, tračni transporter z vakuumskim priključkom - Tračni transporter: vakuumski del površine za vsesavanje materiala, ki se transportira - Širina traku: 100 mm - Dolžina transporta: 650 mm Lsdpfx Aksxu El Sehjru - Pogonska gred: Ø 30 x 100 mm - Širina peresnega ključa: 8 mm - Dimenzije: 650/520/V250 mm - Teža: 51 kg

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm Lrodpfxjw Dvkao Akhju - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Stanje: rabljeno, Leto izdelave: 2021, Delovna širina: 410 mm Stružni valj: tračni nož Lredpfoxnhpgsx Akheu Število nožev: 4 Dolžina ravnalne mize: 2360 mm Nastavitev ravnalne mize: ročica Prikaz odvzema ostružkov: skala Prikaz konkavno-konveksnega spoja: - Nastavljiv kot vodila: da Moč motorja: 4,4 kW Dolžina stroja: 2360 mm Širina stroja: 860 mm Teža: 475 kg

Stanje: rabljeno, Leto izdelave: 1968, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Spindle speed 1,000 - 4,000 rpm Table clamping surface 600 x 200 mm Grinding wheel dimensions 225 x 20 x 51 mm Grinding spindle drive 1.5 kW Table feed 1 - 20 m/min Total power requirement 2.6 kW Machine weight approx. 2 t Space requirement approx. 2.6 x 1.6 x 1.8 m Automatic infeed; 2-axis digital readout; infinitely variable speed control; Water-cooled sine magnetic chuck 400 x 135 mm; 10 mm pole pitch Sony digital display with scales for cross and vertical adjustment Swing-out wheel dresser at the grinding head Lodpowuuwyofx Akheru Table reversal with contactless inductive switches LOSMA belt filter coolant system

Stanje: dober (rabljeno), skupna višina: 2.500 mm, skupna dolžina: 5.300 mm, skupna širina: 2.500 mm, dolžina podajanja os X: 1.550 mm, dolžina pomika po osi Y: 600 mm, višina brušenja: 800 mm, skupna masa: 7.800 kg, GER RS 15/60 Surface Grinder Table size: 1500 x 600 mm X-axis travel: 1550 mm Lodpfsvli H Sex Akheru Y-axis travel: 600 mm Maximum grinding height: 800 mm Wheel size: 400 x 100 mm Automatic infeed: Yes Dovetail accessory: Yes Coolant system: Yes Machine dimensions (W x L x H): 2500 x 5300 x 2500 mm Weight: 7800 kg

Stanje: rabljeno, Leto izdelave: 1980, used, in good condition Manufacturer: GEA-Casadei Model: DE 410 Year of manufacture: 1980 Machine no.: 80-12-72 Planing width: approx. 410 mm Infeed table length: approx. 1200 mm Outfeed table length: approx. 1000 mm Fence Ljdpfx Aovwfxzskhsru Table lips slotted / low-noise Number of knives: 4 pcs Extraction port diameter: 120 mm Required space: approx. 2300 mm x 800 mm x 1000 mm Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: novo, Leto izdelave: 2024, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Joiner table length: 2300 mm Tiltable fence: yes Fold-up jointer tables: pneumatic Maximum planing thickness: 250 mm Thickness table height adjustment: electric with position control Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Ljdpfx Aksvadxljhjru Pressure beam: segmented Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Stanje: rabljeno, širina skobljanja: 500 mm, SCM F5L Surface Planer - Working width: 500 mm - Main motor power: 4 kW - 4-knife cutterblock Lrjdowb Er Ispfx Akhsu - Traditional knives - Main fence adjustable up to 45° - Table length: 2,600 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 500 mm, širina brušenja: 250 mm, skupna višina: 1.800 mm, skupna dolžina: 2.250 mm, skupna širina: 1.400 mm, hitrost pomika os X: 25 m/min, premer brusilnega koluta: 205 mm, dolžina mize: 500 mm, vrsta vhodnega toka: trifazni, širina mize: 250 mm, širina brusilnega kolesa: 19 mm, največja hitrost vretena: 2.900 obr/min, skupna masa: 1.350 kg, moč motorja brusilnega vretena: 1.500 W, največja hitrost vrtenja: 2.900 obr/min, hitrost vretena za brušenje: 2.900 obr/min, moč: 1,5 kW (2,04 KM), hitrost brusnega kolesa: 2.900 obr/min, vhodna napetost: 400 V, premer diska: 205 mm, Metallkraft FSM 2550 Površinski brusilnik Ledpfx Akjv Iq Shehjru Tip stroja: Površinski brusilnik z NC krmiljenim vertikalnim podajanjem Leto: 2018 Krmiljenje: NC krmiljenje Stanje: Zelo dobro Vključuje NC krmiljeno vertikalno podajanje Zaščitna ograda mize Elektromagnetna vpenjalna plošča Orodje za profiliranje brusnega kamna Hladilna naprava Halogensko svetilo Digitalno odčitavanje (DRO) Avtomatsko mazanje Tehnične specifikacije Premer brusnega kolesa: 180 do 205 mm Širina brusnega kolesa: 19 do 13 mm Vpenjalna odprtina brusnega kolesa: 31,75 mm Hitrost vretena: 2900 obr./min Dimenzije mize: 500 × 250 mm Hitrost pomika po osi X: 5–25 m/min Moč pogonskega motorja: 1,5 kW Električni priklop: 400 V / 3-fazni / 50 Hz Dimenzije stroja: 2250 × 1400 × 1800 mm Teža stroja: 1350 kg Opomba: *Specifikacije so podane v dobri veri, a niso zajamčene.*

Stanje: rabljeno, Table length: 2000 mm Lredpfxou Su I Se Akheu Table width: 1250 mm Table height: 250 mm Machine weight approx. 1.4 t Support feet: 600 mm Total height: 850 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 929 h, nosilnost: 4.000 kg, dvižna višina: 17.550 mm, vrsta goriva: dizel, gradbena višina: 2.500 mm, lastna masa: 12.400 kg, skupna dolžina: 6.420 mm, vrsta pogona: Diesel, gradbena širina: 3.790 mm, Teleskopski viličar, fiksna konstrukcija Lodpfx Asv Swphokheru Razred hitrosti: 25 Tehnično stanje: zelo dobro Opis: Naša oprema je redno vzdrževana in preverjana. Ponujamo najem, prodajo, servis in popravila – pri nas dobite vse na enem mestu. Na voljo je tudi možnost najema z možnostjo nakupa, financiranja ter odkupa rabljenih strojev. Naša ekipa vam bo z veseljem nudila strokovno in osebno svetovanje. Pokličite nas ali nam pošljite sporočilo prek SMS-a ali WhatsAppa. Manitou MT 1840 Easy je zmogljiv teleskopski viličar, namenjen za gradbišča ter za dvigovanje in transport materiala. Z dvigovno višino do 17,55 m, nosilnostjo 4.000 kg in štirikolesnim pogonom je ta stroj idealen za delo na neravnem terenu in pri težkih obremenitvah. Robustna konstrukcija. Visoka mobilnost na terenu. Idealno za dvigovanje, montažna in transportna dela. Enostavno upravljanje in vsestranska uporabnost. Dodatne informacije in neobvezno povpraševanje najdete na naši spletni strani – varno delo v vsaki višini.

Stanje: delavnici obnovljeno (rabljeno), Completely overhauled surface grinder manufactured by LŽT Kikinda, model URB 550/750/1000. Machine specifications: - Table size: 880/1130/1500 x 300 mm - Max. grinding length: 550/750/1000 mm - Max. grinding width: 350 mm - Max. grinding wheel axis height: 500 mm - Max. table transverse travel: 300 mm - Max. table longitudinal travel at max. speed: 570/770/1020 mm - Standard magnetic chuck size: 500/750/1000 x 300 mm - Grinding wheel: 300 x 50 x 127 mm - Grinding accuracy: 5 microns - New electrical cabinet with ABB and Schneider components - Final painting in color of customer’s choice Warranty on work: 6 or 12 months. Delivery time: by agreement. Ljdpjv Tah Nofx Akheru For further information, please feel free to contact us.

Stanje: novo, Leto izdelave: 2026, Max. working width: 1330 mm Processable sheet thickness: 0.5 – 80 mm Infinitely variable feed rate: 0.5 – 6 m / min Abrasive belt dimensions: 1910 x 1350 mm Brush element dimensions: 300 x 400 mm Abrasive belt speed: 18 m / s Number of planetary heads with brushes: 8 units Material thickness adjustment accuracy: 0.01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Total connected load: 68 kW Standard equipment Machine configuration: 3-station model: 1st station: Abrasive belt 2nd station: Brush elements 3rd station: Abrasive belt Main components: PLC: Siemens Ledpfx Aex S Dwqjkhoru Touchscreen: Siemens Low-voltage devices: Schneider Frequency converters: Schneider Extraction fan: Elektror, Germany Total connected power: Abrasive belt motor: 15 kW Brush motor: 11 kW Infeed conveyor motor: 4 kW Vacuum suction motor: 15 kW Frequency converter for rotary brushes: 15 kW Machine with wet suction unit Optional equipment Optional feeding methods: 1. Feeding by strong permanent magnet adsorption conveyor (suitable for workpieces made of sheet metal; workpiece size ≥ 30 mm × 30 mm) 2. Feeding by vacuum underpressure adsorption conveyor (suitable for non-magnetic materials such as stainless steel sheets, copper sheets, aluminium sheets, etc.; workpiece size ≥ 50 mm × 50 mm)