Stroj za brušenje površin - horizontalni

ELB-Schliff Perfekt B10 SPS-NK

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 28.000 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 80 kg, premer brusilnega koluta: 508 mm, teža obdelovanca med konicami: 80.000 g, razdalja med središči: 800 mm, širina brusilnega kolesa: 80 mm, največja hitrost vretena: 1.000 obr/min, dolžina podajanja os X: 370 mm, dolžina podajanja os Z: 800 mm, hitrost pomika os X: 15.000 m/min, hitrost podajanja os Z: 7.500 m/min, skupna masa: 7.250 kg, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Ponujamo rabljeni cilindrični brusilni stroj STUDER favorit_1044, letnik 2021. Dsdpfjylld Dex Ab Hekn Tip: favorit_1044 Serijska št.: 1044- Leto izdelave: 2021 Napetost: 400 V Frekvenca: 50 Hz Teža: 7.250 kg Za dodatna vprašanja ali informacije nam lahko pošljete sporočilo ali nas pokličete.

Stanje: dober (rabljeno), Leto izdelave: 1975, Največji premer kolesa: 630 mm y-pomik: 560 mm Širina kolesa: 180 mm Največji modul: 8 Najmanjši modul: 1 Premer obdelovanca: 750 mm Premer mize: 450 mm Premer vpenjalnega trna: 58 mm Hod vretena: 200 mm Nastavljivost: 230 mm Razdalja med vretenom in mizo: 225–450 mm Vpenjalni stožec Morse 4 Poglobitveni pomik: 0,03 mm/hod Ovitkovni pomik 10n: 0,18–0,74 mm/hod Število hodov 12n: 47–300 hodov/min Električna izvedba – napetost/frekvenca: 380/50 V/Hz Teža stroja pribl.: 5.500 kg Dkodpfjyb Sx Tox Ab Hjn Stroj je bil zvišan za 100 mm

Stanje: rabljeno, Leto izdelave: 2011, Technical Data: X-travel: 410 mm y-travel: 610 mm z-travel: 500 mm Spindle speed: 15,000 rpm Spindle taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table dimensions: 320 x 320 mm Table load capacity: 100 kg Tool changer: 48 positions Total power requirement: 35 kVA Machine weight approx.: 7.4 t Required space approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining center, NC rotary swivel table, C-axis 360°, B-axis +30-120°, Chip conveyor, Internal coolant supply 20 bar, 3D probing system, KinematicsOpt, Dedpfx Aowlhvwjb Hskn electronic handwheel, Operating hours: approx. 9,600 h "machine on", approx. 3,500 spindle hours

Stanje: dober (rabljeno), Leto izdelave: 2017, In this offer, you are purchasing used office furniture that is in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for Sale: We also offer workstation sets for €450 each. Dkjdpfxeiiv Ikj Ab Hsn 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo fabric, grey/black 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One material drawer - 3 steel drawers with soft-close function - Lockable, incl. key Desks: • Approx. 10x desks by FM 1600 x 800 x 680 to 760 mm (continuously height-adjustable) in light grey. Frame made of aluminium. • Approx. 10x folding tables (can be used as desks) 1600 x 800 x 720 mm on castors, in light grey. Aluminium frame. • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Aluminium frame. • Approx. 4x high desks 1600 x 800 x 1300 mm in arctic white. Frame in white, aluminium. Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests, fully adjustable. Upholstery: Polo, black, base in black plastic. • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black. Frame in silver. • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue. Frame in silver. • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red. Frame in silver. Storage: • Approx. 16x mobile pedestals by FM 434 x 800 x 590 mm with one material drawer and 3 steel drawers. Carcase in light grey. Handles in aluminium. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to make you an individual offer. You can also purchase each piece of furniture individually. Condition: These are used items, which may show signs of use (minor scratches or yellowing). Packaging and Shipping: You are welcome to inspect everything during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Leto izdelave: 1971, stanje: dober (rabljeno), Decoiler – expanding mandrel decoiler with coil lifting table Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Dkedpfod Ha E Sjx Ab Hen Coil weight: 10 t Mandrel Ø: 508 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 2.000 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 18.000 obr/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 38 Nm, skupna masa: 65.000 kg, Initial commissioning: 2012 Control: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (below floor) with T-slots 18H12 / 250mm 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power demand: 85 kVA Dimensions, weights Space required (machine only, without peripherals): approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Opening doors on both sides - 10-station tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Dkedjyrdc Eepfx Ab Hen Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 8.737 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, Matec 30HV 3000x800x800 mm NC vrtljiva glava +/- 105°, nastavljiva Heidenhain TNC640 Rokavica (ročno kolo) Motorska vretena 15.000 obratov/min / 30 kW / 198 Nm Dodpfx Aboyaa Sfe Hjkn Vpenjalni konus HSK 63A 48 mest za orodja IKZ 40 bar Trakasti filter, kapaciteta 450 litrov Zrak skozi vreteno Odsesavanje oljne meglice (levo in desno) Pregradna stena za nihanje Stranska vrata za nakladanje Priprava za dodatno NC os 3D merilna sonda Renishaw RMP60 Kontrola zloma orodja (laser) Vpenjalna hidravlika 100 bar / 10 l/min 2 x vpenjalni krog, vpenjanje, sproščanje, ročno in preko M-funkcije Vmesnik za robota Stroj ima zelo malo obratovalnih ur in je bil vedno odlično vzdrževan. Popolna (servisna) zgodovina nam je znana. Orodja in vpenjala se lahko prevzamejo skupaj s strojem.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 35.598 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07400004031, moč vretenovega motorja: 20 W, hitrost vretena (min.): 3.250 obr/min, največja hitrost vretena: 5.000 obr/min, prehod palice: 90 mm, skupna masa: 10.000 kg, capacità barra 90 mm - 2 torrette motorizzate a 12 posizioni - asse Y sulla torretta superiore - contropunta - controllo Siemens 840D powerline - macchina in condizioni perfette, sempre utilizzata con olio - attrezzatura eccezionale - alimentatore di barre LNS Sprint S2. Djdjuyx Hzopfx Ab Hjkn

Stanje: rabljeno, Leto izdelave: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Clearance between shaping spindle / machine body 205 mm Spindle bore approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 /min Table size 400 mm Table bore 125 mm Height between table and shaping head min./max. 190/290 mm Fixed shaping spindle overhang 250 mm Dkedpfx Abjt Hww Ds Hsn Axial table travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Circular feed at tool Ø 125 0.125 - 3.150 mm /stroke Spindle/main drive approx. 19 kW / 25 kW- 380 V - 50 Hz Weight 7,000 kg Accessories / special equipment: - Hydrostatic linear guides with separate hydraulic unit, - Built-in 100 mm intermediate plate for increased shaping head position, - Hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and internal clamping, various clamping chucks for different workpiece diameters - Infinitely variable stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master) - Automatic stroke rate and automatic feed change for roughing and finishing in up to 3 cuts, - Automatic and motorized stroke end lock in upper position after finishing, - Separate control and switch cabinet, - Integrated coolant system with chip conveyor and magnetic separator - Approx. 20 change gears, Condition: satisfactory to good, soon ready for demonstration Delivery: ex stock - as inspected Payment: strictly net, upon receipt of invoice

Stanje: zelo dobro (rabljeno), obratovalne ure: 8.064 h, Znamka: LAGUN Model: GBM-22E Tip: CNC 5 OSI Krmilnik: HEIDENHAIN 530 Dimenzije mize: 2.200 x 1.000 mm Št. in širina T utorov: 7 x 22 mm Razdalja med utori: 140 mm Hodi osi (X, Y, Z): 2.000 x 1.200 x 1.000 mm Model glave: Avtomatska Vrtljaji glave: 4.000 rpm Stožec: ISO 50 DIN 2080 Moč motorja: 28 kW Neomejena nastavitev hitrosti: 50➗ 4.000 Obseg hitrosti: 2 Hitri pomiki: 10.000 mm/min Teža stroja: 15 t Elektronski volan: Da Delovne ure: Stroj v pogonu: 22.924 h Krmilje vklopljeno: 23.132 h Djdeyg R Abopfx Ab Hjkn Avtomatski cikel: 8.064 h