Oblikovanje in debeljenje

SCM L´invincibile FS 7

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, številka stroja/vozila: AB00033534, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, širina skobljanja: 520 mm, največja hitrost vrtenja: 5.000 obr/min, skupna dolžina površin za skobljanje: 2.310 mm, število rezil rezkalnika: 4, premer gredi skobeljnika: 120 mm, višina ograje za poravnavanje: 1.200 mm, Oprema: motorna zavora, Main Features: - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Permanent precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm - Planer shaft speed: 5000 rpm - 4 knives, 35 mm x 3 mm x 520 mm - Aluminum jointer fence: 1200 mm x 190 mm - Jointer fence tilting range from 90° to -45° - Min./max. planing height: 3 / 250 mm - Thicknessing feed speed: 5-8-12-18 m/min - Extraction hood diameter for planing: 120 mm - Extraction hood diameter for thicknessing: 120 mm Standard Equipment and Accessories: - Infeed table adjustment by parallelogram system, for chip removal via degree scale - Simultaneous height adjustment and locking of worktables, complete with anti-tilt device - Quick-change system for switching from surface planing to thickness planing (CE version) via a special support for opening the planing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic system - "READY" electronic control including: * Thickness table adjustment * Manual, semi-automatic, and automatic mode with 99 storable work programs * Additional functions: calculator and operation hours counter - Machine table with height adjustment via 4 steel threaded spindles - Feed unit with independent drive for thicknessing - Rubber-coated outfeed roller - Segmented pressure shoe at infeed - Planer shaft and knife holder with markings as positioning aid, with setting gauge for planer knives - Automatic star-delta starter for main motor - Motor power: 9 kW, 50 Hz (11 kW, 60 Hz) (S6 -40%) [S1] 7.5 kW/10 HP, 50 Hz (9 kW/12 HP, 60 Hz), [S6 -40%] 9 kW/12 HP, 50 Hz (11 kW/15 HP, 60 Hz) - Operator tools Safety/Protection: - Micro safety switch for correct positioning of the jointer tables and extraction hoods - Jointer guard (CE version) Bljdpfx Aswwv Ufjfnsd - Automatic motor brake on main motor - Thermal protection switch - 110V auxiliary circuit - Emergency stop switch - Lockable main switch - CE declaration of conformity (CE version) Scope of delivery: R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 34.02.15 "TERSA" cutter block with disposable reversible knives, complete with one set of knives 24.06.15 Tiltable auxiliary fence for thin workpieces 08.32.28 Base

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, For sale is a used Hammer circular saw-shaper B3Winner Comfort with a cutting length of 2000 mm. The machine is in excellent condition and has been professionally reconditioned and inspected by our specialist staff. (Fully functional) Technical data: - Tilting circular saw and shaper 90-45° - Sliding table 2000 mm Bsdev Sbpxjpfx Afneld - Outrigger table with angle index - Mitre fence 1300 mm - 4 spindle speeds 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each 5.5 HP (4 kW), 400 Volt - Year of manufacture: 2019 The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: circular saw, shaper, milling machine, combination machine, combi machine Reference: R-L0AHG

Stanje: rabljeno, prevoženi kilometri: 226.206 km, moč: 235 kW (319,51 KM), prva registracija: 10/1981, vrsta goriva: dizel, število sedežev: 27, vrsta prenosa: samodejen, barva: bela, zavore: retarder, Oprema: klimatska naprava, kopalnica, parkirni grelec, vgradna kuhinja, This SG 221 HDS was originally intended for shuttle service to Southern Europe, but remained a unique prototype. Nevertheless, it effectively served as the foundation for two other special high-deckers: the S 215 HDS and the S 216 HDS, which would soon bring many new customers to Kässbohrer. Additionally, this coach introduced the "S" designation, standing for "Super," as these new high-deckers lived up to that name: with a height of 3.63 meters, the elevated passenger compartment provided even more space, allowing for additional luggage capacity (16 cubic meters) and more service amenities. Additional tanks could also be accommodated with ease. Regardless of which of the two Super-Setras an operator selected, the fascinating engineering aspect of both Ulm-built models was that, except for the front section, they were 100% constructed from the modular components of the 200-series and shared identical fittings with the other Setra touring coaches. The 216 HDS offered space for up to 16 seat rows. In direct comparison, the version with underfloor cockpit provided even more room. With the Setra SG 221 HDS, Kässbohrer had a vision, but the ban on operating articulated coaches for tourist trips through France led the Ulm team to shift focus to non-articulated vehicles. From then on, the SG 221 HDS was used as a demonstration and information vehicle at trade fairs and conferences. With its generously equipped onboard kitchen, it became a central meeting point for representatives and customers. +++ One-of-a-kind Vehicle +++ +++ ATTENTION!!!!! +++ +++ Restoration Project Only +++ +++ Not Roadworthy / Engine Starts Only +++ Engine: Mercedes-Benz Mileage: As per odometer Transmission: 5-speed automatic Seating: 24+2+1 sleeper seats ---- Safety & Equipment: - Retarder - Fog lights Passenger Area: * Auxiliary heater * Air conditioning * Tables * Curtains * Adjustable air vents * Reading lights * Double glazing * Footrests * Draft system with bar counter and large kitchen in rear section * Separate bar area in central section * Front lounge convertible to sleeping area * Refrigerator + additional unit * Microwave * Rear WC * Driver's microphone Exterior: - Power steering - Tachograph with chart - Sleeper cabin - Driver's door Bedpfxormlp Ee Afnsld - Roof hatches/fans/vents Other: - German vehicle documents - Dimensions: Length 18.00m, Width 2.50m, Height 3.95m - Twin tyres - Tyre condition front axle approx. 40% - Our internal vehicle number: 7271 Errors excepted. Images and description may differ from the actual vehicle. Over 180 vehicles constantly available in stock.

Stanje: rabljeno, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, specific pressing force max. 2 kg/cm² Heating 2x 1.8 kW - Long-belt sander 3 kW Bedpfx Afexl Ha Senold Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Sliding table saw / Veneer saw / Edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, adjustable cutting height 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control with main and emergency stop switches Machine on undercarriage Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended. Sale is made in "as is" condition. Technical data, condition description, year of manufacture and scope of delivery as per manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. The following applies: "bought as seen". Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery conditions: ex stock.

Stanje: zelo dobro (rabljeno), Technical data: Max. planing width: 400 mm Bledjv Rv Dbopfx Afned Max. planing height: 240 mm Cutterhead diameter: 120 mm Number of knives: 4 Feed speed: 6-12 m/min Manual height adjustment Extraction port diameter: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 167 h, For sale: remotely controlled, cordless mower available at a bargain price. Ideally suited for challenging conditions such as steep roadsides or hazardous locations. (Watch the video) Equipped with four-wheel drive and a long-range remote control. Capable of mowing up to 1,500 sqm per hour. Bljdjvv Hi Eopfx Afnod - Special winter pricing – in spring the price will be 20% higher! We therefore recommend purchasing now. The machine is, of course, fully functional and ready for immediate use. - Direct from a liquidated company in Sweden. The original purchase price was over 25,000 EUR. Four-wheel drive, remote control operation – everything is 100% operational. The mower was purchased in December 2014 and first put into use in spring 2015! Key data: Performance / Consumption - Engine: Briggs & Stratton 950 - Displacement: 223 cm³ - Fuel tank capacity: 4 L / 1 gallon - Fuel: Unleaded petrol - Transmission: Hydrostatic - Speed: 0 – 4 km/h - Steering: wheel-based - Blade: 1 rotary - Cutting width: 56 cm / 22 inches - Cutting height: 4 – 9 cm / 2 – 4 inches - Manual clutch - Mulching kit option - Max output: up to 1,500 m²/h - Fuel consumption: 1 L/h - Maximum slope: 30 degrees / 58% - Dimensions: 1040 x 900 x 600 mm - Weight: 125 kg Transport available within Poland and the European Union!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Baling Press is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing used tires and car bumpers to a minimum volume. The baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for medium to high material throughput. By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the materials to the recycling cycle. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1,600 kg Transport height: 2,300 mm Feed opening: 1200 W x 680 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Special features: - Extra-long double cylinders for even and early compression of material - User-friendly lever operation - Bale ejector for easy removal of finished bales - Additional retention claws to minimize material spring-back - Fixture for 4 rolls of strapping - High-quality product "Made in Europe" Blodpfx Afsvug Dyenod Suitable for compacting: - PET bottles - Food cans and tin containers - Plastic canisters and plastic packaging - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Additional options: - Annual maintenance with UVV inspection - Machine color according to RAL - PLC control with automatic pressing cycle, bale-ready indicator and E-stop with key - Vertical door - Strapping bands / strapping wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baling Press. Can press, can baling press, PET baler, PET press, used tire press, tire baling press, tire press, can press, baling press, paper press, waste paper press, cardboard press, carton press, film press, paper baler, waste baling press, waste press, recyclable press, waste compactor, waste press, residual waste compactor.

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse Bedpfx Aot R T Hcofnjld 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Technical Data Table width: 500 mm Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic Bjdpfx Ajpq If Djfnold T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 248 h, največja hitrost: 50 km/h, velikost sprednje pnevmatike: 600/70 R30 | 0%, velikost zadnje pnevmatike: 710/70 R42 | 0%, velikost pnevmatike: 710/70 R42, število postelj: 43, Pnevmatike (spredaj): 600/70 R30, Pnevmatike (zadaj): 710/70 R42, Obratovalne ure: 248, Prva registracija: 17.12.2024_____Osnovna oprema/tehnični podatkiMOTOR Največja moč 180/245 kW/KM (ISO 14396) Največji navor 1100 NmNajvečja moč z upravljanjem moči 194/265 kW/KMNajvečji navor z upravljanjem moči 1178 Nm6-valjni, 7,4l AGCO Power - 74 LFNT-5D, CR, 4VEmisijski standard (DOC+SC+SCR) brez recirkulacije izpušnih plinov, stopnja 5Elektronsko upravljanje motorja z Vistronic ventilatorjemSpomin zahtevane hitrosti motorjaPowercore motorni zračni filter z grobim ločevanjem nečistočEasyCare hladilni paketDodatni pred-filter za gorivo z ločevalcem vode500-litrski rezervoar za gorivo Bljdpsvv Dp Nsfx Afned