Stroj za površinsko brušenje

GEIBEL & HOTZ FS 635-Z CNC

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Pedpfx Adsx E Dncjysgg Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details. Pgodpfevdal Asx Adysg

Stanje: zelo dobro (rabljeno), Hello, We are offering used Erowa PalletSetW vices. All items have been cleaned and tested by us. - ER-025895 Vice PalletSet W 40mm - ER-054922 Flat Vice 8mm PalletSet W - ER-055774 Vice 0-170mm Pjdoitcq Tjpfx Adyogg Additionally, a full functionality check was performed. These vices show minor signs of use, but are in very good technical condition. Single unit purchase is also possible. Spare parts are available as well. If you have any questions, please do not hesitate to contact us.

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 20403, Angbot 25170 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling diameter in steel ST 60: 50 mm - Spindle taper: MT 4 - Spindle stroke: 180 mm - Infinitely variable spindle speeds with intermediate gearbox: - Range 1: 60 – 210 rpm - Range 2: 210 – 765 rpm - Range 3: 120 – 420 rpm Pgsdowncaijpfx Adyog - Range 4: 420 – 1530 rpm - Throat depth: 330 mm - 3 automatic feed rates: 0.1 / 0.2 / 0.3 mm/rev - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance table to spindle: approx. 780 mm - Max. distance base plate (machined) to spindle: 1250 mm - Coolant system - Work light - Machine vice - Assorted 10 pcs. HSS drills - Power supply: 400 V / 2.6 / 4 kW - Space requirement: approx. W 720 x H 2050 x D 1150 mm - Weight: approx. 350 kg

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Pgjdpfx Adecxxtmjyeg Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 73136, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 720 mm, nazivna (navidezna) moč: 64 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, skupna višina: 3.150 mm, skupna dolžina: 5.605 mm, skupna širina: 4.290 mm, skupna masa: 12.600 kg, hitrost vretena (min.): 15.000 obr/min, delovne ure vretena: 21.786 h, število mest v zalogovniku orodij: 46, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (read): Control on: approx. 112,194 h Machine on: approx. 72,272 h Spindle on: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with typical signs of wear, technically functional. Inspection under power possible by arrangement. Working Areas Travel paths: X-axis: 1350 mm Y-axis: 1150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration time to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur-St Lubrication: Lifetime-lubricated Cooling: Water with corrosion protection Feed Drives Feed motors: AC Rapid traverse/Working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle per hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Psdpfx Aox Eh Iqjdyjgg Table load: 1600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Location bore: Ø 50 H6 Clamping torque: 8000 Nm Max. moment of inertia: 75 kg·m² Table stroke above floor: 1120 mm Table drive: Torque motor, direct Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm fully equipped 130 mm partially equipped Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Chip-to-chip time (vertical): 11 s Coolant / Chip Removal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed nominal power: 75 kW Power connection: 58 kW Connection rating: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Space requirement (L × W × H): 5605 × 4290 × 3150 mm

Stanje: rabljeno, Leto izdelave: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Center height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. Pgjdpfx Adov Tqqnjysg It can still be inspected under power at the seller’s site for a short time. In 2022, the machine underwent partial overhaul and maintenance at our facility, including geometry restoration according to the manufacturer’s protocol. Equipment: - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Internal grinding spindle Fischer UJ70 - Paper band filter - Automatic cycle: roughing – finishing – spark out – return

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 390 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 1.300 mm, prehod palice: 65 mm, skupna višina: 2.700 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, skupna masa: 12.000 kg, Oprema: dokumentacija / priročnik, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofitted in 2022) Control: Siemens 840D Solutionline Number of axes: 5-axis Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant system and chip conveyor - Differential pressure clamping for main / counter spindle - Workpiece pick-up device - Preparation for bar feeder (available as an option) Technical specifications: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B-axis: 220° Spindle bore: 65 mm Spindle speed: 5,000 rpm Spindle power: 34 kW Counter spindle speed: 6,000 rpm Counter spindle bar capacity: 52 mm Counter spindle power: 20 kW Tool changer: 24 stations B-axis interface: HSK 63 B-axis spindle speed: 12,000 rpm B-axis spindle power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: • Full enclosure • NC swivel head as B-axis • Coolant unit and chip conveyor • Documentation Psdpfx Asubyv Redysgg • Geometric accuracy within new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer’s tolerances for new machines - All wear parts replaced Retrofit 2022: - Z1 and Z2/3 linear guides replaced - Y-axis linear guide replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Slide covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, viewing windows replaced - Maintenance carried out according to manufacturer’s specifications

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, DMG CMX 50 Krmilnik: Siemens 840D sl Pomik X: 500 mm Pomik Y: 450 mm Podpfx Aex Sqyfodysgg Pomik Z: 400 mm Leto izdelave: 2023 Teža: 4700 kg

Stanje: rabljeno, Leto izdelave: 2019, Suitable for the generative manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel. Accessories: - Full enclosure - rePLUG "Standard" powder unit for powder supply and feed, extraction of metal powders from the process chamber, and automatic sieving - CELOS for LASERTEC SLM - al-deco-STD fire extinguishing system – extinguishing unit: 5-liter argon cylinder - CELOS App II OPTOMET (Basic) software package for automatic pre-calculation and optimization of process parameters for selected materials Maximum travel X-axis: 325 mm Maximum travel Y-axis: 325 mm Maximum travel Z-axis: 400 mm Podewhiycopfx Adyogg Build volume: 300 x 300 x 300 mm³ Layer thickness: 20 – 100 µm Laser type: Ytterbium laser Maximum laser power: 400 W Minimum focus diameter: 35 µm Tank volume: 50 dm³ Connection rating: approx. 400 V / 50 Hz Weight: approx. 1200 kg Colour: Light grey, dark grey, red