Zaščita Pred Trkom Zaščita Pred Trkom Polica nakup rabljenega (6.277)

Stanje: dober (rabljeno), Leto izdelave: 2019, Pallet racking, Nedcon, height 2.50 – 2.70 m, beam length 3 m and 4 m, 500 kg per pallet, up to 5,600 pallet positions, - used - : Price ex location: only €65,000 (net), dismantled, packed, and loaded, for complete purchase including numerous short beams and short and long upright/end frame protections / guard rails (for double and single rows)! Price for partial quantities: Frames: €45 each Beams: 2 m: €14 each 3 m: €18 each 4 m: €22 each Manufacturer: Nedcon Type: Pallet racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500 kg Number of frames: approx. 900 units Most frames come with frame protectors Frame height: 2.50 m and 2.70 m Podpfx Asw D Ewvoltjgp Frame depth: approx. 1.10 m Beam lengths: 4 m at least 624 units (beam height e.g. 12.5 cm / bearing approx. 5 cm) 3 m at least 518 units (beam height e.g. 8.5 cm / bearing approx. 4 cm) Some 1 and 2 m beams also available Condition: good Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Stanje: rabljeno, V tem paketu je vključeno: 1 x prečka dolžine 3.600 mm (rumena) 2 x varovalna zatiča Za ta sistem je na voljo približno 170 stebrov in 800 prečk. Enostavno stopite v stik z nami. Proizvajalec: Jungheinrich Stanje: rabljeno, dobro ohranjeno Globina regalov: 1.100 mm Dolžina prečke: 3.600 mm Nosilnost police: 3.200 kg Dodatna oprema kot na primer: - pritrditev na tla - povezovalni elementi - opozorilne nalepke o obremenitvah - zaščita pred udarci - varovalne ograje - rešetke Pedjyu Rbaspfx Altjgp - zadnji zaščitni mreži - prečne letve za globino - ločevalne ograje in še veliko več... Pošljite nam povpraševanje! Prodajni in dobavni pogoji (B2B): - Cene & logistika: Vse cene so neto iz skladišča. Ekspresna dostava z lastnim voznim parkom je možna po individualnem dogovoru. - Status ponudbe: Vse ponudbe so nezavezujoče. Pridržujemo si pravico do vmesne prodaje. - Pridržek lastninske pravice: Blago ostane naša izključna last do popolnega plačila (prepoved razpolaganja in predelave). - Garancija: Izključno prodaja pravnim osebam in podjetjem. Pri rabljenih in IIa izdelkih je izključena odgovornost za stvarne napake. Za nove izdelke veljajo garancijski pogoji proizvajalca.

Stanje: novo, Leto izdelave: 2025, Ein kompakter Faserlaser-Blechschneidmaschine mit vollumfänglichem Schutz Pjdpfx Aohwrg Esltjgp Das platzsparende Design vereint umfassenden Schutz mit erhöhter Sicherheit. Jeder Rahmen des Schneidmaschinenbetts ist nach der Nut-und-Feder-Verbindung verschweißt, um optimale mechanische Eigenschaften sowie erhöhte Stabilität und Festigkeit zu gewährleisten. Der ausziehbare Schneidtisch – optional elektrisch – spart Stellfläche und verbessert das Benutzererlebnis. Bequemes und schnelles Öffnen und Schließen per Tastendruck: Die Laserschutztür überzeugt durch sicheren und zuverlässigen Betrieb dank Zahnstangenantriebssystem mit selbstverriegelnder Schneidmaschinenmechanik. Die Laserköpfe erkennen hervorstehende Hindernisse und reduzieren dadurch effektiv die Schadensrate und langfristige Wartungskosten. Geeignetes Material: Metall Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1500W, 2000W, 3000W, 6000W, 12000W Arbeitsbereich: 1000*1500mm Schneidgeschwindigkeit: 0–100 m/min Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC-Steuerung: Ja Kühlungsart: Wasserkühlung

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone Pgodpfemhhypox Altsp - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: Pgedpfx Alomhh Dhetep - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm Pgedemhh Dzspfx Altep - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Psdoh R Taqepfx Altegp We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Pgsdpfx Asfdkb Tjltjp Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Pedpfx Asmhh Anjltegp - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth Pgedsguk A Hjpfx Altjp - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. Podpfxomhhy Ns Altogp The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Pgodpfx Alsguk Dketsp Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Pgsdpfxsmhh Dto Altjp Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm Pedpfx Aljguk Dvotsgp - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, 100 pieces wire mesh decking, 1 ton per pallet space, for pallet racking 1.20 m deep – New: Price per piece ex-works: €20 (net)! Only available for full lot purchase! Manufacturer: MantaMESH Model: MantaMESH Year: 2024 Condition: Excellent Available: Immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Load bearing capacity independent of racking beams Uniformly Distributed Load (UDL) (kg): 1000 Permissible Deflection (mm): 7.3 Structural Failure Load (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant Podpjttv Tgofx Altsgp - Made in Germany - Pre-galvanised, hemmed support channels - SafeEDGE® on meshes and support channels - Mesh provides over 70% open area - EU Design Registration No. 002435099-0003 Specifications: - Beam type: box section 50 / box section 50 - Rack depth (mm): 1200 - Mesh depth (mm): 1202 - Mesh width (mm): 879 - Top wire spacing (mm): 25 - Bottom wire spacing (mm): 100 - Top wire diameter (mm): 4 - Bottom wire diameter (mm): 5 - Support channel thickness (mm): 1.2 - Number of support channels: 5 - Pre-galvanised - Weight (kg): 12.24 Front: - Bend (mm): 30 - Bend type: External - Bend direction: downwards Rear: - Bend (mm): 30 - Bend type: External - Bend direction: downwards

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Pgodpfedz Uxqsx Altep We are offering a used rack impact guard for sale. Suitable for a double rack row: 2 x 1,100 mm rack depth + 200 mm rack connector Scope of delivery: 01x Impact guard rail, used Material color: yellow Total length: approx. 2,455 mm Total length without base plate: approx. 2,400 mm Suitable for a double rack row Total depth: approx. 150 mm Total height: approx. 315 mm Profile dimensions: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Required floor anchors: 8 pcs Our range of services at a glance: (Prices upon request) Assembly and installation Our general assembly conditions must be observed Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all rack systems Delivery with our own fleet (unloading not included)

Stanje: dober (rabljeno), The scope of delivery includes: 198x depth beams, used Material color: Sendzimir galvanized total length: approx. 1,110 mm suitable for frame depth: approx. 1,100 mm clear support width: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Beam support: approx. 50 mm Weight per piece: approx. 3.02 kg Podpslhp Tcofx Altjgp Note: The unit price applies only for a minimum purchase quantity of 198 pieces (01x pallet).

Stanje: dober (rabljeno), Technical Data for Pallet Rack Beam: Racking System: Link 51 Type: Boltless XL Scope of Delivery Includes: 01x Pallet Rack Beam, used Material Color: yellow Box Profile: 80|53 x 45|25 mm Beam Type: 4 BST Step Profile: H 28 mm, W 20 mm Bracket: 4 HK (hooks) Clear Width: 2,700 mm Max. Load per Pair of Beams: 900 kg, with evenly distributed load 02x Locking Pins, used Design: fully galvanized For securing the horizontal beams against accidental lift-out Further Information on the Pallet Rack Beam: Beam type 4 BST is intended for use with chipboard, steel panels, or similar inserts, which then finish more or less flush with the upper edge of the beams. This design results in no loss of height; additionally, the front side of the step beam protects the shelves or insert panels from damage. Psdpfx Alskv Urwotsgp The beams are not intended for pallet storage, but rather serve as picking levels, i.e., for storing cartons, small parts, or similar items.

Stanje: dober (rabljeno), Tehnični podatki za izravnalno pločevino: Proizvajalec: Bito PRO Obseg dobave vključuje: 01x izravnalna pločevina, rabljena Pgsdpfx Aoi Hkngjltsp Primerno za osnovno ploščo M; ki je nameščena na regalnem stojalu P4-P6 Barva materiala: Sendzimir pocinkano Skupna širina: ca. 150 mm Skupna globina: ca. 105 mm Debelina materiala: ca. 4,00 mm Razdalja med luknjami (sredina – sredina luknje): ca. 120 mm Teža: ca. 0,46 kg / kos.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical Data for the Pallet Rack Beam: Racking System: META (Thyssen) Scope of delivery includes: 01x Pallet rack beam, used Material colour: Orange Beam type: HN 100|20 Box profile: 100 x 50 mm Bracket: 3 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 2,100 kg, with evenly distributed load 02x Locking pins, used Design: Fully galvanized For securing the beams against accidental lifting General information about the item: This item is only offered for collection. Any additional transportation or shipping of this item is subject to extra costs, which can be quoted separately depending on the place of delivery or scope of delivery. Overview of our services: (Prices on request) Podpfx Asiimtqoltegp Assembly, installation Our general installation conditions apply Racking inspection Racking inspection in accordance with DIN EN 15635 as per the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Technical data for pallet rack beam: Racking system: Bito Type: PL 38 Scope of delivery includes: 01x Pallet rack beam, used Colour (material): blue Box profile: 127 x 50 mm Beam type: PT36.127SN Connector: 3 HK (hooks) Pgjdponfvnuofx Altop Clear span: 3,600 mm Max. load per pair of beams: 2,400 kg, with evenly distributed load 02x Locking pins, used Finish: fully galvanized To secure the beams against unintentional lifting

Stanje: dober (rabljeno), Technical data for pallet rack beams: Racking system: Dexion Type: Speedlock P90 Scope of delivery includes: 01x pallet rack beam, used Material colour: light blue Box profile: 100 x 50 mm Beam type: SLO 102|2 Connector: 5 HK (hooks) Clear span: 3,300 mm Max. load per pair of beams 1,300 kg, with evenly distributed load 02x safety pins, used Version: fully galvanized Pgsdjnh H Dmspfx Altjp For securing the crossbeams against unintentional lifting

Stanje: skoraj kot novo (rabljeno), Note: This is a second-choice (II. Wahl) product, brand new and unused. "Second-choice" indicates that there may be dust deposits, minor scratches, or slight soiling. Technical data for the shelf beam: Manufacturer: SSI Schäfer Racking system: R 3000 Beam type: KTRZ 31036 Scope of delivery includes: 02x shelf beams, second-choice (new, unused) Material finish: Sendzimir galvanized Z-profile: 60 x 40 x 12 mm Clear span: approx. 994 mm Hole pitch: approx. 53 mm Bracket: 3 HK (hooks) Weight per piece: 1.7 kg Maximum load per pair of beams: 200 kg with evenly distributed load 01x wooden shelf panel, second-choice Chipboard width: approx. 985 mm Chipboard depth: approx. 755 mm Material thickness: 22 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Podpfx Aen D Ebzsltegp Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply, which can be individually quoted depending on the delivery location and scope of delivery.

Stanje: dober (rabljeno), Technical data for pallet racking beam: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Pallet racking beam, used Material colour: RAL 2004 orange Box profile: 125 x 50 mm Beam type: PNB0485/1.5 Pgedolvrg Rspfx Altjp Connector: 4 hooks Clear span: 3,600 mm Max. load per beam pair: 1,832 kg with evenly distributed load 02x Safety pins, used Version: fully galvanised For securing the beams against unintentional lifting

Stanje: novo, Technical specifications for pallet racking beam: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Pallet racking beam, new Material color: RAL 2004 orange Box profile: 130 x 50 x 1.5 mm Beam type: PNB0413 S355MC Connector: 4 hooks Clear width: 2,700 mm Max. load per pair of beams: 3,000 kg, with evenly distributed load Pedpfx Aelwkwdsltogp 02x Safety pins, new Design: fully galvanized For securing the beams against unintentional lifting