Serija Spojnikov Za Transportne Trakove nakup rabljenega (87.101)

Stanje: rabljeno,

Stanje: dober (rabljeno), Leto izdelave: 2013, Edgebander Manufacturer: Brandt Model: KDF 440 Year of manufacture: 2013 Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 60 mm Feed speed: 8 - 14 m/min, variable Jointing unit: Yes Premelter: Yes End trimming saw unit: Yes Radius flush trimming unit: Yes Ksdpewmby Ssfx Al Nedk Corner rounding unit: Yes Radius scraper: Yes Flat scraper: Yes Buffing unit: Yes

Stanje: zelo dobro (rabljeno), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB 1. PRIMULTINI Band Saw SIC 1600 - Roller diameter: 1600 mm - Roller width: 245 mm - Motor: 75 kW 2. PRIMULTINI Carriage Type CFE - 3 log clamps Kdjdpfx Ajv R Edqel Njk - Max. round timber diameter: 1000 mm 3. PRIMULTINI Operator Cabin with complete control system 4. Complete Conveyor Technology - Infeed transverse conveyor, 4-strand, approx. 12 m long - Log charger, hydraulic - Movable outfeed roller conveyor with pressure rollers - Re-loading transverse conveyor - Conveyor belt under the roller conveyor for slabs - Vibro table for slabs - Roller conveyor with transverse discharge - Roller conveyor with transverse discharge The complete plant was manufactured in 1999.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, 2 identical machines available, built in 2021. The machines were only operated for a short time in test mode in a large distribution warehouse, then professionally dismantled and stored. Therefore, they are in excellent, fully functional condition. Full documentation for the machines is available. The XF / XP 111 M is a fully automatic strapping machine with a top-mounted sealing unit. It is designed to strap a large number of pallets of varying sizes vertically using PP or PET strapping. This system is reliable, easy to operate, and can be installed in tight spaces due to its compact dimensions. - For PP and PET strapping - Vertical strapping - Tension force up to 5,500 N - Siemens PLC S7 - Compact design, minimal space requirements Kjdpsw Htz Iefx Al Nsdk - Easy access to all mechanical components - User-friendly operation via touch screen The machines have been professionally dismantled and stored – they are available immediately. There are also 90 new, original Cyklop sealed rolls of strapping band optionally available.

Stanje: zelo dobro (rabljeno), 2 pre-cutters Kdjdpsulh Nujfx Al Nok Glue application unit Guillotine Drip station with 2 saws Straight cutter Corner rounding cutter

Stanje: zelo dobro (rabljeno), Gluing unit Guillotine Crosscut saws Straight cutters Kdjdpfxjrzaave Al Njk Scrapers Polishing machine Without pre-milling

Stanje: zelo dobro (rabljeno), adhesive applicator guillotine cut-off saws milling machine scraper Kodpjttu Rijfx Al Nodk polishing machine

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with discharge function optional), two-motor HF (high-frequency) end trimming station with swiveling motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated travel control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying • 3 free slots for finishing units • 10" color touchscreen. • Two counter-rotating, process-controlled jointing units equipped with diamond-tipped spiral jointing cutters ensure precise and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the pot), finely adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby (prevents glue from burning when the machine is on but not in use for extended periods). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color change. Optional: Quick-change system for glue pot. • Automatic strip magazine with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension. Ksdpfol Rix Nox Al Nodk • High-frequency end trimming saw equipped with two 0.55 kW HF motors, 12,000 rpm, two saw blades, and high-precision linear guides ensures clean and accurate sawing, equipped with extraction hood, manual tilt adjustment. • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with carbide-tipped special cutters. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics, incl. digital meter counter for edge material consumption. • LED cabin lighting • Riepe spray systems for anti-adhesive, NFLY, and cleaning agents optionally available. Optional finishing units (3 free slots): • Radius scraping unit: Slightly pulling cut removes any radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Gently scrapes away any glue residue at the glue joint from the workpiece surface. • Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, provide a high-gloss finish for ABS and PVC edge materials.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. • Standard equipment includes LED lighting and LED-Motion system. Kdsdpjl Rix Eofx Al Njk • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces, flush trimming unit with VR function, HF milling unit, chain feed, double roller upper pressure, and extendable workpiece support rail. Suitable for ABS and PVC edge banding rolls, as well as fixed lengths from 0.4 to 2.0 mm and workpiece heights from 8 to 50 mm. Feed speed: 5.5 m/min • 2 free spaces for finish units • 5.6" color touch screen • Automatic edge feeding for roll material via rotatable reel table D=600 mm • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters guarantee clean and tear-free jointing of the workpieces before edge application. • Teflon-coated glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue burn-off if the machine remains switched on but is unused for extended periods). (Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change). Kdedpfxsip Uzps Al Nsk • Pressure zone consisting of a powered pressure roller operating synchronously with the glue roller, and an adjustable pressure roller with spring tension, ensuring a strong joint between the edge material and the workpiece, adjustable via SIKO display. • Flush trimming unit for front and rear workpiece edges, including VR function (for vertical curves), HF motor 0.27 kW / 12,000 rpm, automatic tracing on the workpiece, with extraction hood • High-frequency combination milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special cutters, suitable for radius and chamfer trimming, horizontal and vertical workpiece tracing, unit adjustment with digital counters for different edge types, height adjustment of the upper unit via upper pressure. • 5.6" color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is idle, activation/deactivation of units, and error diagnostics. • LED lighting in the enclosure • Riepe spray systems for anti-adhesive or cleaning agents available as option Optional finishing units (2 free slots): • Radius scraper unit: Slight cutting action removes any milling marks from radius cutters, ensuring a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Light cutting action removes any glue residues from the glue line on the workpiece surface. • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm, provide a superb finish for ABS and PVC edge materials.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA-PUR glue pot with drain function optional), high-frequency cross-cutting station, high-frequency milling unit, chain feed, double pressure roller top pressure, extendable workpiece support rail, and signal lamp for workpiece sequencing. Suitable for ABS, PVC, melamine, and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and workpiece height from 8 – 50 mm. Feed speed: 7.0 m/min. • 2 free spaces for finishing units • 7.0“ color touch screen • Automatic edge feeding for roll material via a rotary turntable D=600 mm Kdodpfx Alsd R U Acj Nsk • Infeed lineal (400 mm) with support • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge application. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof, with bottom glue reserve (excess glue is automatically fed back into the glue pot), fine adjustable glue application via glue roller, separately adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if machine remains switched on but is unused for a long time). Optional: EVA/PUR glue pot with drain/cleaning function for fast color change • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable pressure roller with spring tension, for perfect edge bonding between edge material and workpiece; pressure zone adjustable with digital counter. • High-frequency cross-cut saw equipped with 0.21 kW HF motor, 12,000 rpm, 2 saw blades, and high-precision linear guides for clean, precise cutting; equipped with extraction hood. • High-frequency combination milling station, 2 powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and chamfer milling, horizontal and vertical workpiece sensing, unit adjustment equipped with digital counters for different edge types, 2 chip extraction hoods with central extraction nozzles 2 x Ø 100 mm; height adjustment of upper unit via top pressure. • Rotatable control panel with 7.0” color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, on/off of units, and error diagnostics • LED lighting in the cabin • Riepe spray systems for anti-adhesive or cleaning agents optionally available Optional finishing units (2 free spaces): • Radius scraping unit: Light pulling cut removes possible radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraping unit: Removes glue residues from the workpiece surface at the glue joint with a light pulling cut • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, One-sided automatic edge banding machine with jointing unit, hot-melt adhesive application on straight workpieces (EVA-PUR glue pot with drain function optional), HF-cut-off saw station, HF milling unit, corner rounding unit, chain feed, double pressure rollers, extendable workpiece support rail, and signal lamp for workpiece sequence. Suitable for ABS, PVC, melamine, and solid wood veneer edge-banding rolls as well as fixed lengths from 0.4 – 3.0 mm thickness and workpiece height from 8 – 50 mm. Feed speed: 7.0 m/min. • 2 free spaces for finishing units • 10.0" color touchscreen • Automatic edge feeding for roll material via rotatable reel D=600 mm • Infeed fence (400 mm) with support • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of workpieces before edge banding • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on but unused for an extended period). Optional: EVA/PUR glue pot with drain/cleaning function for rapid color changes • Pre-cutting shear for roll material up to 3 mm edge thickness. Kdjdpjd R U Adofx Al Nek • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable pressure roller with spring tension, for optimal joint formation between edge material and workpiece; pressure zone adjustment with mechanical SIKO indicator. • High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm, two saw blades, and high-precision linear guides ensure clean and accurate cuts, equipped with extraction hood. • High-frequency combination milling unit: two powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and chamfer milling, horizontal and vertical sensing of workpiece, unit adjustment with digital counters for different edge types, two chip extraction hoods with central extraction port 2 x Ø 100 mm, height adjustment for the upper unit with pressure beam. • Corner rounding unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, switchable from the control panel. Optionally single-sided (front or rear edge) or double-sided corner rounding. • Swiveling control panel with 10.0" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtimes, activation/deactivation of units, and error diagnostics. • LED lighting in the enclosure • Optional Riepe spray systems for anti-adhesive or cleaning agents Optional finishing units (2 free slots): • Radius scraper unit – Light, pulling cut removes any radius-milling marks and ensures a perfect finish. Fine adjustment via digital counter. • Surface scraper unit – Light, pulling cut removes glue residue from the workpiece surface at the glue joint. • Buffing unit – 2 motors 0.05 kW, 1.50

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN-No.: 88.04.017 D, 8 pieces of very clean (refurbished) Jakob Müller Frick AG NF42 looms from 1988, 1989, and 1990 from my inventory. The machines run flawlessly and are 100% operational (completely overhauled). 12 shafts, without magazine, with Mütrans, some with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Item No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, completely overhauled, from 1990 at €6,500 each Item No.: 90.01.704 B Item No.: 90.01.755 A Item No.: 90.01.229 A 1 unit NF 2/84mm, completely overhauled, from 1989 for €6,500 Item No.: 89.00.118 D 3 units NF 2/84mm, completely overhauled, from 1988 at €6,500 each Item No.: 88.04.244 A Item No.: 88.02.758 A Item No.: 88.02.758 B The machines come from a curtain tape production line and were originally equipped with a Z compartment. As part of the general overhaul, they have been converted to standard compartments. All tension trees and pressure rollers have been newly vulcanized by Westland. Card rollers in the chain box are new or newly vulcanized. The central lubrication system in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and are fitted with 12 shafts. All machines are fitted with Mütrans II. Individual machines with double-belt take-off (for heavy-duty fabrics) can be delivered upon request. I believe this is possible for 4-5 machines. Finely knurled tension trees can also be installed for 4-5 machines as an option. All needle holders are suitable for double needles. Two additional Mütrans II units can be installed for this purpose upon request. The machines have been rebuilt from scratch. All bearings, shafts, and bushings have been inspected and replaced as necessary. All swing arms have been checked and replaced if required. Installed: - 1st shaft free (spacer block installed) - 2nd and 3rd shaft: swing arm 201 - 4th–6th shaft: swing arm 202 - 7th–9th shaft: swing arm 203 Ksdpfxsr Ix Igo Al Njdk - 10th–12th shaft: swing arm 204 - 13th shaft: swing arm 205 All shaft springs have been checked and replaced where needed. There are no porous, cracked, or defective parts. The electrical system has been checked, the circuit board for thread monitoring has been inspected and, if required, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and undamaged. The machines are offered without Müdata. Four units are additionally equipped with crawler gears. The machines have been set up and tested. Note: Machines are supplied without oil, yarns, slats, reeds, needles, and chain links. Delivery on Euro pallet, FOB Wuppertal.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.650 h, največja debelina roba: 3 mm, višina izdelka (maks.): 45 mm, višina izdelka (min.): 10 mm, dolžina izdelka (min.): 140 mm, širina izdelka (min.): 70 mm, TECHNICAL DETAILS Machine Frame: Tempora 45.03L, made of thick-walled electro-welded steel construction Control System x-motion plus control: Swiveling 15" smartouch panel Unlimited storage space for user-defined edging programs Fine adjustment of travel path parameters Optimization of edge overhang during pre-trimming front and rear Feed Chain Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubber-coated support pads with quick-change system Rotary Table Edge Magazine Roll edge material diameter: 740 mm Roll edge material thickness: 0.4 – 3 mm Extension Frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic handling of larger workpieces Upper Pressure Beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Upper pressure rollers arranged in double-row staggered layout Edge Feeding Powered, rubber-coated feed roller Edge thickness: 0.4 – 3.0 mm Workpiece Feed Extendable workpiece support: up to 450 mm Jointing unit material removal: 0 – 2 mm (on feed fence), digital counter Jointing Unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2 x 1.1 kW (1.5 hp) Material removal: max. 2 mm Workpiece height: max. 45 mm Jointing cutter with diamond blades Z2+2, D-80 x 49 mm (for angular and tear-free workpiece edges) Glue Unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR granulate Heat-up time: 10 minutes Linear meter performance: 375 lm (at 19 mm panel) Fine-adjustable glue roller Pressure Unit 1 aluminum roller at 90° angle 1 rubber-coated pressure roller Guillotine Shears Roll edge material thickness: 0.4 – 3 mm For pre-trimming, oscillating End Trimming Saw Unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide End trimming saw with 45° travel path, 0.35 kW, 12,000 rpm Selectable between 0° and 10° cut angle Milling Unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, each 0.75 kW, 12,000 rpm Replaceable cutters: 4 pieces each Precision: 2-axis adjustment enables fine tuning in the 1/100 mm range Motorized Corner Rounding Unit Corner processing unit for post-formed and softforming profiles Workpiece height: 10 – 45 mm Edge thickness: 0.4 – 3 mm TCT cutter with 2 blades Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius Scraper Unit Processing of 2 mm plastic edges Scraper adjustment via digital counter and m-motion positioning system Scanning of workpiece contours Polishing Unit Kjdpewwq Dzsfx Al Nodk Upper and lower polishing unit Spray device for cleaning agents Flat Scraper Upper and lower flat scraper for residual adhesive removal. Scanning of workpiece contours Multifunctional Milling Unit for Cup Hinge Boring For processing workpieces with cup hinge bores, back panel grooves and acute-angled workpieces

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application to straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor HF end trimming station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, integrated section control for contact-free operation of processing functions, and L-Motion control (18 axes). For ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece height from 10 – 60 mm. • Automatic edge feeding for roll material via rotatable roll table D=800 mm • Infeed table (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood laths. • Two counter-rotating, demand-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the pot), fine dosing glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color changes. • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and two smaller, conversely conical pressure rollers with pneumatic pressure, ensures optimal joint formation of the edge material with the workpiece. Program-controlled adjustment for edge thickness with L-Motion motor. • High-frequency cross-cut saw equipped with two 0.55 kW HF motors, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure a clean and precise cut, equipped with extraction hoods. Pneumatically swivels from the control panel. • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, each with 3 L-Motion motors for positioning the horizontal tracing shoes, vertical tracing shoes, and the multifunction tool. 2 chip extraction hoods, height adjustment for the top unit with the top pressure. • Corner copying unit: Automatic processing of end edges up to 3 mm edge thickness. Equipped with 2 high-frequency motors 0.27 kW, can be activated from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. Each with 2 L-Motion motors for positioning the horizontal tracing shoes and the tool. Kdodpfx Ajf Tdwcjl Nok • Rotatable control panel with 10'' color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, switching units on and off and error diagnostics, motorized top pressure, extensive program memory, and fully automatic operation of the processing units.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Compact and flexible, even in the smallest of spaces. Measuring just 2.13 m in length, this machine delivers a professional finish to your workpieces. Equipped with a 1.1 kW high-frequency motor jointing unit and a diamond-tipped spiral jointing cutter, a Teflon-coated glue pot, a pre-trimming unit, and an HF multi-function milling unit. It features two free slots for finish units, such as a surface scraping blade or polishing unit. Operation is user-friendly via a 3.5" color touchscreen. ► Control via 3.5-inch color touchscreen ► Jointing unit with 1.1 kW high-frequency motor and diamond-tipped spiral jointing cutter operating counter-rotating for clean and tear-free jointing of workpieces before edge banding ► Teflon-coated glue pot with automatic standby function ► Automatic edge feeding with roll dispenser D = 600 mm for edge material in rolls as well as fixed lengths from 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressing of the edge band ► HF multi-function milling unit – suitable for radius and flush milling on the longitudinal edge and for the front and rear workpiece edges, including vertical rounding of the edge ► 2 free slots for finish units such as a surface scraper or buffing unit ► Workpiece chain feed with rubberized chain pads and double roller top pressure ► Pressure beam with central adjustment and SIKO display ► Fixed workpiece support (optional extendable support for large workpieces) ► 400 mm infeed fence with support ► LED lighting inside the enclosure (optional) ► Processing of workpieces from 10 – 45 mm thick Kodpfx Alorrzklj Njdk ► Feed speed 6.5 m / min ► Machine length: 2,130 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Preformed edge banding machine with direct glue application to the edge material for thin and thick edges from 0.4 to 3 mm. Ksdpfxod Sb Dtj Al Njdk • Leak-proof gluepot with bottom glue reservoir and fast heat-up time after machine downtime. Automatic start of the application roller after approx. 8-10 min. • Pressure roller driven by gear motor, infinitely variable via potentiometer from 0-15 m/min. • Automatic edge feed and automatic end trimming for straight and shaped workpieces via foot switch. • Pneumatic roller separation unit max. 3 x 30 mm • Film plate D = 600 mm

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Rabljeni stroj GM020.0068 AKV 3003 DK - F Leto izdelave: 2007 Izvedba: 3 mm 1. rezkalna postaja: Kombinirana Površinski vlečni strgalnik z izkopom Podvozje Kdedpfx Alow Nih Is Nok Pnevmatska nastavitev rezkanja Ročica končnega stikala, naklon 7,5°

Stanje: zelo dobro (rabljeno), Features Used belt conveyor by Overbeck Colour: blue Feet to be ordered separately Incl. SEW motor Material: steel Ideal for fast material transport Professionally dismantled and packed Condition: fully functional Kdedpjdu T Abofx Al Nsk 1 piece in stock Belt Conveyor The conveyor belt is ideally suited for interlinking machines or workstations in the picking area and for optimising internal workflows. During transport, the belt conveyor can move sensitive and variously sized containers, boxes, or other packaging and item units to the loading or discharge point. It also serves as a connecting section before or between production and processing machines. Furthermore, it enables efficient transport of parts within operations and warehouses, and is suitable for conveying significant quantities and distances. Technical Data: Dimensions of the belt conveyor Total length: 1,610 mm Total width incl. motor: 620 mm Total width excl. motor: 510 mm Belt details Belt width: 400 mm Belt type: Grip Condition: New Frame Height: 140 mm Width: 30 mm Material: steel

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Stroj za lepljenje robov Proizvajalec: Felder Tip: Tempora 60.06, F600 Leto izdelave: 2019 Popolnoma avtomatsko upravljanje iz nadzorne plošče. Kjdpfxexix Hxo Al Nsdk Enota za spajanje: Da Enota za odrezovanje: Da Enota za rezkanje radijev: Da Rezilo za vlečenje radijev: Da

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, številka stroja/vozila: C/70001, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 601 h, višina obdelovanca (maks.): 42 mm, največja debelina roba: 3 mm, dolžina izdelka (min.): 160 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece height: 8 – 42 mm Workpiece width: min. 70 mm Workpiece length (strip edges): min. 160 mm Workpiece length (continuous roll): min. 60 mm Workpiece length (with double end trimming unit): min. 150 mm Edge parameters Edge thickness: max. 3 mm Edging thickness: 0.2 – 12 mm Working height and speed Working height: 800 mm Feed rate: 12 m/min Glue application Glue application: via application roller Process: hot-melt adhesive, hot-cold application, one-sided, right-hand execution Glue pot heat-up time: 8 min MACHINE DETAILS Ksdpewlquvjfx Al Nodk Total connected load: 12.5 kW Total weight: 2,100 kg Total length: 5,300 mm Total width: 900 mm Total height: 1,300 mm Operating voltage: 400 V, 50 Hz Input current: 400 A Compressed air connection: 6 bar Air connection: 6 bar, 1/4" Extraction connection: 1 x central extraction socket, diameter: 160 mm AGGREGATES - Jointing unit with 2 high-frequency motors, each 1.5 kW, 12,000 rpm, automatic control, including DIA MAX DIA jointing set Ø 85 x 30 x 42 mm, Z 3 (LEUCO system), for panel thicknesses up to 42 mm - Double end trimming unit with 2 high-frequency motors, each 0.3 kW, 12,000 rpm, 2 automatic positions (0° / 3°), 2 carbide saw blades Ø 140 x 3.2 x 16 mm, Z 36 - Flush trimming unit with 2 high-frequency motors, each 0.43 kW, 12,000 rpm, for solid wood and plastic edges, single-sided tracing, 2 carbide reversible knife heads Ø 70 x 20 x 16 mm, Z 4 - Fine trimming unit with 2 high-frequency motors, each 0.3 kW, 12,000 rpm, double-sided tracing, quick-change system, 2 AT 73 carbide radius knife heads Ø 73 x 16 x 16 mm, Z 3, profile knives R2 – R5 - Scraper unit, double-sided tracing, automatic control, for PVC and plastic edges - Corner rounding unit with 2 motors, each 0.35 kW, 12,000 rpm, 200 Hz, double-sided tracing, 1 working spindle above/below, 2 radius knife heads AR 73 Ø 73 x 16 x 16 mm, Z 3, profile knives R2 – R5 EQUIPMENT - Double pressure roller top assembly with electronic positioning - Single-feed for strips and solid wood edging - Automatic roll magazine for rolls up to 800 mm diameter, with pneumatic cut-off device up to 3 mm thickness - Quick-heating glue pot for hot-melt granulate, with electronic temperature control - Automatic glue dosing control via PLC (co-flow and counter-flow) - Automatic infeed guide rail, no manual adjustment for edge thickness required - Central control via PLC-operated control panel, including plain text error display - Program memory with name and number programs

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 36956, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, skupna dolžina: 9.800 mm, skupna masa: 600 kg, višina plošče: 1.060 mm, TEHNIČNE PODROBNOSTI Višina obdelovanca: 60 mm Debelina roba: do 3 mm Minimalna širina plošče: 55 mm Minimalna dolžina plošče: 100 mm Višina plošče: 1.060 mm Nosilec orodja: ISO 30 PODROBNOSTI O STROJU Mere & Teža Skupna dolžina: 9.800 mm Teža: 600 kg Vhodna frekvenca: 50 Hz OPREMA Povratni sistem Kdodox A Tzqopfx Al Nok Deluje z PUR lepilom Razpršilni sistem Predrezalna enota RT 20 Lepilna enota SP 20 6-pozicijski magazin za robove Končna rezalna enota IT 90-S Groba rezkalna enota RS 10 Fina obrezovalna enota RF 40 Opomba: Dodatne informacije o opremi so na voljo v priloženi kartici stroja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, številka stroja/vozila: 220.01.016.22, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 18 m/min, premer vrtljive mize: 750 mm, največja hitrost vrtenja: 12.000 obr/min, The machine is being auctioned due to the closure of operations! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edgeband material (coil): 0.4–3 mm Rotary table diameter for coiled edge material: 740 mm Workpiece infeed support surface: 600 mm Spindle speed, diamond jointer unit: 12,000 rpm Feed rate, chain conveyor: 10 and 18 m/min Cross-cut saw unit speed: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical Data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW FEATURES Ball bearing rotary table for coiled edge material Workpiece infeed and infeed fence with manual adjustment Chain feed with two feed rates Edge feeder for both coil and strip material, single feed Kodpfx Ajxwt Nqol Nedk Upper and lower multifunctional milling units with x-motion PLUS via smartouch Upper and lower radius scraper blade, x-motion PLUS Corner processing unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing unit Pneumatic-mechanical retract safeguard for workpiece spacing control glueBox application unit

Stanje: pripravljen za uporabo (rabljen), V zelo dobrem stanju. Kdodpsvunm Asfx Al Nsk

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, največja debelina roba: 3 mm, obratovalni tlak: 7 letvica, potrebna višina: 1.400 mm, zahteva za prostor dolžina: 4.050 mm, potrebna širina: 1.300 mm, delovna višina: 900 mm, with PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: jointing cutter (including DIA tool), up to 2 mm milling depth (max. 1 mm for special materials such as multiplex), maintenance-free glue pot with quick-change system, including glue discharge device, high-frequency cross-cut saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and insertable cutter (combined version), corner rounding unit, surface scraper (incl. pneumatic lift), robust chain feed, double pressure rollers with ball bearings, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Complete with quick-change corner milling unit, radius scraper (incl. pneumatic lift), running gear F 4 – Technical Profile Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Kdjdpfjx E N Nfex Al Njk Electrical connection: 400 V / 3 Ph / 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm