Kellenberger Kel-Varia Rs 175 / 1000 nakup rabljenega (18.563)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, POPOLNA NAPRAVA ZA MEŠANJE, ODRČEVANJE TEŽE IN PAKIRANJE V VREČE – RUBERG / PAGLIERANI Popolna industrijska naprava za mešanje, odtehtavanje, transport in pakiranje finih suhih praškov. Oprema je trenutno nameščena, POPOLNOMA FUNKCIONALNA in na voljo za pregled in demonstracijo v delovanju. Oprema je na voljo bodisi KOT CELOTEN PAKET ali KOT POSAMEZNI STROJI / SISTEMI. Naprava se je uporabljala za obdelavo in pakiranje finih mineralnih praškov. VKLJUČENA OPREMA: RUBERG CM 2000 – SISTEM ZA MEŠANJE Z MOGOČNOSTJO 2.000 KG Proizvajalec: Gebr. Ruberg GmbH & Co. KG, Nemčija Model: CM 2000 Prostornina serije: pribl. 2.000 kg Industrijski mešalnik za serijsko proizvodnjo Glavni pogon mešalnika SEW: 37 kW Hitrost glavnega mešalnika: 35 vrt/min 2 stranska pogona rotorja: 2 x 5,5 kW Hitrost stranskega rotorja: 720 vrt/min Sistem za odtehtavanje Georg Büttner Območje odtehtavanja: 0–2.000 kg Ločljivost: 1 kg Vertikalni transporter (bucket elevator) RUBERG Prostornina transporterja: pribl. 17 t/h Na voljo ločeno ali kot del celotne naprave. RUBERG CM-ZE 1000 2SR – SISTEM ZA MEŠANJE Z MOGOČNOSTJO 1.000 KG Proizvajalec: Gebr. Ruberg GmbH & Co. KG, Nemčija Model: CM-ZE 1000 2SR Leto izdelave: 2001 Številka stroja: 168 / 11013 Uporabna prostornina mešanja: pribl. 1.000 litrov Skupna prostornina mešalne komore: pribl. 1.300 litrov Industrijski mešalnik za serijsko proizvodnjo Glavni pogon mešalnika: 15 kW Hitrost glavnega mešalnika: 40 vrt/min 2 stranska pogona rotorja: 2 x 7,5 kW Hitrost stranskega rotorja: 1.455 vrt/min Sistem za odtehtavanje Georg Büttner Območje odtehtavanja: 0–1.100 kg Hnedpfx Ahjzv S Tlo Hst Ločljivost: 1 kg Vertikalni transporter (bucket elevator) RUBERG Prostornina transporterja: pribl. 10 t/h Pnevmatsko upravljan izpustni sistem Izpustna povezava: DN 630 Povezava za polnjenje: DN 175 Povezava za pregled: DN 150 Na voljo ločeno ali kot del celotne naprave. PAGLIERANI TP35 NAPRAVA ZA ODRČEVANJE TEŽE IN PAKIRANJE V VREČE Z ULTRASONIČNIM ZAPIRANJEM Proizvajalec: Paglierani S.r.l., Italija Model: TP35 Tip: Naprava za odtehtavanje in pakiranje v vreče z ventilom Število izhodov za polnjenje: 1 Uporaba: Fino zmleti suhi praški Glavne lastnosti: En izhod za polnjenje Polnilna turbina z vodoravno osjo Integriran sistem za odtehtavanje Merilna celica Pnevmatska opora in sistem za zapiranje vreč Pnevmatski nadzor pretoka produkta Polnilni lij Električna nadzorna omara Pnevmatski nadzor Razporeditev transportnega sistema Ultrasonični sistem za zapiranje vreč BRANSON ULTRASONIČNA ENOTA ZA ZAPIRANJE Proizvajalec: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serijska številka: DAB 08102435 A PAGLIERANI TP35 je na voljo tudi ločeno. STANJE: Uporabljena – popolnoma funkcionalna. Vsa oprema je trenutno nameščena in jo je mogoče pregledati ter demonstrirati v delovanju po predhodnem dogovoru. DOKUMENTACIJA: Tehnična dokumentacija, navodila za uporabo in tehnične risbe so na voljo za več komponent. Po zahtevi so na voljo dodatne fotografije, dokumentacija in tehnične informacije. MOŽNOSTI PRODAJE: Celotna naprava je na voljo kot en paket, vendar je mogoče posamezne sisteme za mešanje RUBERG in sistem za pakiranje PAGLIERANI kupiti tudi ločeno. Cena za posamezne stroje/sisteme: na zahtevo. Lokacija: Grčija Razpoložljivost: Po dogovoru Pregled in demonstracija v delovanju: Po dogovoru Razstavljanje, nakladanje in transport se lahko dogovorimo ločeno.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, Obratovalne ure: pribl. 3.000 ur. Hnsdpfjy Nl U Sjx Ah Hst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Takoj na voljo iz delavnice za invalidsko zaposlovanje: Stružnica L & Z Imatec Tip ID 175 Letnik izdelave 1986 Višina med centri 175 mm Premer obdelovanca nad posteljo 350 mm Premer obdelovanca nad podstavkom 210 mm Razdalja med centri 1000 mm Premer vretena 41 mm Število vrtljajev vretena 35,5 – 1600 vrt/min Digitalni prikazovalnik Vpenjalna glava Rezalna plošča Multifix s pritrdilnimi elementi Hnsdpezygguefx Ah Hjt Naprava za hlajenje Pogon 3 kW Teža 1700 kg Cena: 1.750 evrov + DDV, dobava iz našega skladišča.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna masa: 9.000 kg, največja višina reza: 1.200 mm, največja širina rezanja: 1.100 mm, premer valja: 1.400 mm, skupna širina: 2.100 mm, skupna dolžina: 2.400 mm, vhodna napetost: 220 V, dolžina tračnega lista: 10.450 mm, širina tračne žage: 206 mm, moč: 90 kW (122,37 KM), lastna masa: 19.000 kg, hitrost rezanja: 40.000 mm/min, Oprema: kabina, Prodamo celotno žagalno linijo z vertikalno tračno žago VTZ 1400 PLUS proizvajalca Mebor. Ponudba vsebuje: - Vertikalna tračna žaga VTZ 1400 PLUS proizvajalca Mebor - Robusten transporter za hlodovino z nakladalnimi rokami - Freza za hlode - kanter BM900 proizvajalca Mebor - Kabino za operaterja vertikalne tračne žage - Valjčne in verižne transporterje - Linijo za robljenje VR800 S proizvajalca Mebor s servo vodenim, visokohitrostnim pozcioniranjem krožnih žag - Dvoosno večlistno krožno žago VC 900 D proizvajalca Mebor - Linijo za odpadke - Sekirasti drobilec odpadkov TH200/500/3 proizvajalca Rudnick & Enners - Linija za sortiranje 47-14 proizvajalca Holzmatic Hnsdpoxq Rgyofx Ah Het

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 1.000 m³/h, skupna širina: 1.020 mm, skupna dolžina: 1.680 mm, skupna višina: 2.460 mm, skupna masa: 1.540 kg, obratovalni tlak: 10 letvica, vhodna napetost: 400 V, moč: 14,2 kW (19,31 KM), One (1) heat-regenerating compressed air adsorption dryer. The dryer was in operation from 2014 to 2017. The unit has been out of service since 2017. The compressed air was supplied by an oil-free Atlas Copco ZR3 compressor with 132 kW power. Hnedpsr A El Ejfx Ah Hot Manufacturer: Donaldson Filtration Deutschland GmbH Model: HRS 1000 Year of manufacture: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions (L x W x H): 1680 mm / 1020 mm / 2460 mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated alumina Desiccant middle (40 cm): 2 mm activated alumina Desiccant top (remaining to the top): silica gel beads The dryer has already been dismantled and is available immediately. The desiccant was vacuumed from the vessel and sorted by type in airtight bags. The desiccant is still in a usable condition; it is not oiled or contaminated. External re-drying of the desiccant is possible. TÜV has inspected the vessels internally and an expert opinion is currently being prepared. “Loose deposits at the lower part of the dished head” (photos to follow).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 8.900 h, Funkcionalnost: popolnoma funkcionalen, Heller HF5500 vključno s Fastems FPT 1000 Heller HF5000 5-osni obdelovalni center Krmilnik: Siemens Sinumerik SL Vreteno: HSK100 Shranjevalnik orodij za 100 orodij Hnodpsw I Tupjfx Ah Hot Fastems FPT1000 18 mest za palete Programsko orodje za načrtovanje (neposeljena izmena)

Stanje: dober (rabljeno), adjustable gear motor, variable speed gear motor, electric motor -Gearbox manufacturer: AEG -Motor manufacturer: AEG -Motor power: 0.175 kW -Speed range: 450–4000 rpm -Motor: adjustable -Mounting type: B3 -Shaft height: 80 mm -Drive shaft diameter: 14 mm Hsdpfx Ajciq Dyjh Hent -Quantity: 1 unit available -Price: per unit -Dimensions: 380/200/H240 mm -Weight: 22 kg

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 V / 50 Hz / 3-phase Net Weight: 2,200 kg TECHNICAL DATA Hsdped Amifofx Ah Hsnt Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head to tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle + tailstock): 175 – 250 mm Maximum swing diameter (125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 – 500 mm Swivelling range of work table (left/right): 10° each Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding (diameter x width x bore): 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding (diameter x width x bore): 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270°, lockable every 90° Vertical traverse of grinding spindle head (centre height): 125–350 mm Cross traverse of grinding slide: 285 mm Hydraulic rapid infeed and retraction of the grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev. Plunge grinding stock removal: 0–0.9 mm/rev. Micrometer stop for infeed per division: 0.001 mm/rev. Swivelling range of workpiece spindle head: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor approx.: 4 hp Errors and omissions excepted. Technical data provided subject to confirmation. Inventory no. 2170089, Machine accessories list: - 1 Workpiece spindle head, Morse Taper 5 - 1 Sine bar without comparator - 1 Grinding spindle head with 4 drive pulleys - 1 Tailstock, Morse Taper 3 - 1 Collet clamping system with extractor and reduction sleeve B32 - 1 Internal grinding attachment with Fischer UJ50x250 arbor, drive pulley Ø 48 mm for 14,000 rpm - 1 Rotatable wheel dressing unit with 50 mm base - 1 Table swing stop without comparator - 1 Coolant system with decantation - 1 Ejector - 1 Balancing bar

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 808, Stroj je namenjen za ravnanje in razrez žice premera 4-10 mm z natezno trdnostjo 400-700 N/mm2 z ustreznimi orodji za ravnanje in razrez. Maksimalna dolžina razrezane žice je 3000 mm. Kolut žice: največja masa koluta 1500 kg, največja višina koluta 1000 mm, notranji premer koluta 450 mm Dolžina stroja skupaj z odvijalcem žice je cca 10 m. Hedpfxszy Et Te Ah Hsnt Masa naprave: 8 t Lokacija: V naši delavnici

Stanje: pripravljen za uporabo (rabljen), * Povratni valji: z valji * Za trak: 1000 mm Hnjdpfjywl Tqjx Ah Hst * Valji z dimenzijo: 380 mm x 133 mm * Cena: 36 € na kos * Na zalogi: 500 kosov.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power Supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (integrated into emergency stop circuit) - Machine enclosure below the safety door with chip guard and tool rest - Electrical sensing of the clamping jaws (tool removal control to prevent unintended retraction of the drawbridge) - Coolant swivel system with solenoid valve controlled over the swivel process (to activate coolant before broaching stroke – visual check of lubricant flow, no dry cutting!) - Electrical wiring routed in protective steel conduits - Heavy-duty control cabinet mounting for receiving machine components - Additional oil-tight drip tray on the control cabinet - 3-sided enclosed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel sheet with permanent labeling - 4 central lubrication points for trapezoidal spindle drive Remark: The machine is fully overhauled, and the machine body has been completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - The coolant system (pump, solenoid valve, and drain tap) including the coolant/lubricant swiveling system is new - The clamping jaws are new - The entire electrical system (control cabinet) is new - All metal sheets and covers are new - The following components have been overhauled and re-used: - Machine base - Machine stand - Machine table with table insert Hsdew Ighiopfx Ah Hent - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (new brake, new bearings) The machine is available in our warehouse and can be inspected under power. The attached pictures are original photos of the machine. The machine is marked with the “CE” label. This “CE” conforms to the state of 1998 (first overhaul).

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.8 / 3 Panel thickness (min/max) mm: 10 / 50 Control system: ICOS Open Feed speed m/min (adjustable): 6 - 30 Adjustable fence, CNC controlled Jointing unit (CNC controlled): 1 x 75.186 (1 x 4.5 kW) + 2 x 08.378 (2 x 4.5 kW) Gluing unit (premelter with laser): IMA Laser System LASERLINE (Year 2025) Pressure zone + edge magazine for rolls (12-fold) End trimming unit 08.42/30/B (0.66 kW x 2), speed 20+30 m / min (0° -25°) Sprayer unit (for liquid anti-stick agent) Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (0.66 kW x 1), 4 profiles Contour milling unit (for finishing), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Standard milling unit for grooving/rebating (CNC controlled) Hedpfx Aoy Spclsh Hent Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4), RIEPE (also for PMMA) OPTIONAL: Automatic return system "GELDMEIER" (SOFIT Ref. No. O11043)

Stanje: zelo dobro (rabljeno), with internal grinding attachment Centre height: 125 mm Centre distance: 600 mm Grinding wheel: 400 x 40 x 127 mm Various accessories Hjdpfx Aeiu E Treh Hsnt MARCELS MASCHINEN AG

Leto izdelave: 2015, obratovalne ure: 2.420 h, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 300 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, skupna masa: 5.500 kg, moč vretenovega motorja: 2.000 W, največja hitrost vretena: 600 obr/min, število osi: 2, Cylindrical grinding machine from 2015. This GEIBEL & HOTZ RS 600 C offers a maximum swing diameter of 275 mm and a centre distance of 600 mm. It features a grinding spindle motor power of 5.5 kW and operates at speeds from 700 to 2100 rpm. If you are looking for a high-quality grinding machine, you should consider the GEIBEL & HOTZ RS 600 C, which we have available for sale. Contact us for further information. • Centre distance: 600 mm • Centre height: 140 mm • Max. swing diameter: 275 mm • Maximum workpiece weight between centres: 100 kg • Max. workpiece torque (unsupported): 40 Nm (including clamping devices) Workpiece spindle: • Taper: MT4 and KK5 Tailstock: • System: Cylindrical coil spring • Operation: Manual via hand lever • Quill stroke: approx. 40 mm • Taper: MT4 Grinding spindle: • Arrangement: Left • Motor power: 5.5 kW • Speed: 700–2100 rpm • Bearing: Precision rolling bearings • Lubrication: Lifetime lubrication Grinding wheel: • Standard size: 400 × 50 × 127 mm • Bore: 127 mm • Width: 20–50 mm • Taper: 5° • Max. diameter: 55 mm (taper reference) • Flange diameter: 175 mm • Speed range: 15–35 m/s (constant cutting speed control) Axes X-axis (= CROSS FEED) • Drive: Electromechanical ball screw • Feed: 0.01–8000 mm/min • Adjustment: Electronic handwheel or direction button • Measurement system: Glass scale, internal resolution 0.0005 mm Z-axis (= TABLE FEED) • Drive: Electromechanical ball screw • Table speed: 0.01–12,000 mm/min • Adjustment: Electronic handwheel or direction button • Measurement system: Encoder, resolution 0.001 mm Control / Electrics • The control panel is mounted with a swivel arm on the machine base. • Control: Siemens 840D • Drive system: Siemens SINAMICS • Emergency stop components, integrated safety • Motor protection switches, fuses: Siemens • Connectors: WAGO Harting connectors in work area • Operating voltage: 400 V, 50 Hz, 3-phase • Mains type: TN system, without residual current device (RCD) Hnjdpfxjyzn Dme Ah Hot • Control voltage: 230/24 V • Installed electrical capacity: approx. 14 kW / 18 kVA • Compressed air supply: Oil-free compressed air, approx. 5 bar • Control cabinet: Climate control unit • Electrical cabinet equipment: Interior lighting • Service socket: 230 V / 3 A Pneumatics / Coolant • Compressed air requirement: approx. 5 bar, oil-free • Coolant tank capacity: approx. 300 L • Coolant pump capacity: 50 l/min at 3.5 bar • Cleaning pump capacity: 20 l/min at 1.5 bar Operating Data • Operating hours: 2,420 hours Additional Equipment • Air extraction system • Capacity: approx. 1000 m³/h • Dimensions: approx. 460 × 840 × 580 mm • Three-jaw chuck • Diameter: 160 mm • Operation: Manual • Weight: approx. 10 kg

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 400 kg, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with "CE" marking Pulling force: 3,000kg Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / working area: 430mm x 320mm / 340mm x 220mm Table opening: Ø 90mm for standard Rausch broaching mandrels Workpiece diameter: variable (removable coolant swivel system) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with stepped tool shank) Dimensions (H x W x D): 2,250mm x 800mm x 750mm (H = including 3-side safety enclosure) Motor: 2.5kW / 3.0kW Power supply: 400 Volt / 50 Hz Equipment: - Geared motor drive with 2 working speeds - Safety door with safety interlock (emergency stop circuit) - Easy-to-remove chip chute with tool rest - Tool length adjustment system adjustable from outside (Rausch system) - Protective panel for stroke adjustment and electrical switch units - Electrical sensing of clamping jaws Hnjdpfx Ahjw Huh No Het (Tool removal control for prevention of unintentional return of pull bridge–added safety for operator & tool) - Integrated coolant system - Coolant swivel system (no electrical switch function) - 3-sided enclosed splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip screen with magnet insert - Stainless steel control panel with permanent labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled; the machine frame has been fully reconditioned. The following wear parts have been replaced/renewed: - New trapezoidal screws and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - Cooling system incl. coolant/lubricant swivel system is new - New 2-speed SEW geared motor - New electrics (Siemens) - New safety door instead of a light barrier - New clamping jaws - All sheet metal parts, including covers, chip chute, basket, screen, and spindle guard, are new. - Stainless steel control panel with permanent labeling - Machine repainted with 2-component structural coating The machine bears the "CE" mark from the manufacturer. General Information The dual spindle drive ensures a smooth and central pulling point as well as a consistent broaching speed. The machine is primarily designed for the production of keyways up to 18mm (from 16mm keyway tools, only with stepped tool shanks). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Because of the universal construction of the pull bridge and machine table, it is possible to broach with both profile and flat broaching tools without the use of additional pull heads.

Stanje: novo, Profesionalni vakuumski tumbler s kapaciteto 1000 litrov proizvajalca Sind je zasnovan za mariniranje, mehčanje in enakomerno mešanje mesa v mesno-predelovalnih obratih, proizvodnih enotah, restavracijah in profesionalnih kuhinjah. Vakuumski sistem izboljša absorpcijo marinade, pospeši obdelavo ter izboljša teksturo, okus in končno kakovost izdelka. Hnodpfey Enm Nox Ah Het Stroj je izdelan iz visokokakovostnega nerjavečega jekla, kar zagotavlja dolgo življenjsko dobo, visoke higienske standarde ter odpornost na intenzivno profesionalno uporabo. Spremenljiva nastavitev hitrosti in zanesljiva zmogljivost omogočata prilagoditev različnim izdelkom in proizvodnim zahtevam. Tehnične specifikacije: Tip stroja: Vakuumski tumbler Proizvajalec: Sind Kapaciteta: 1000 litrov Material: Nerjaveče jeklo Uporaba: Mariniranje, mešanje in mehčanje mesa Delovanje: Vakuum Regulacija hitrosti: Da Uporaba: Mesna industrija, predelava mesa, restavracije, profesionalne kuhinje Delovanje: Stabilno, učinkovito in zanesljivo Vzdrževanje: Enostavno in preprosto

Stanje: novo, Nastavitev skupnega časa Nadzor hitrosti s frekvenco Samodejno razkladanje Vakuum 0–95 % Filter vakuumskega sistema Prostornina: 1000 litrov Dimenzije stroja v cm: Dolžina: 214 Širina: 133 Višina: 190 Električna moč: 5 kW Hsdpfx Ahjuu Rr Ds Hent

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 6.000 mm, premer kolesa: 1.000 mm, Horizontalna tračna žaga WRAVOR WRC 1000 Profesionalna industrijska žaga z motorjem 30 kW — za razrez hlodov premera do Ø 950 mm Leto izdelave: 2016 Tehnične specifikacije: • Glavni motor: 30 kW • Fiksna komandna plošča na žagalni glavi • Upravljanje: fiksna nadzorna plošča z Unitronics V-130 PLC • Možna ročna nastavitev debeline reza • Dolžina tira: 9,5 m • Hidravlične klešče za hlode: 4 X • Hidravlično dviganje / mehanski valji: 2 X • Hidravlični kotniki (90°): 3 X • Standardni obračalnik hlodov: 2 X • Oddajalni silonski transportni trak za prevoz desk Hodpjzd A Ivefx Ah Hent

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 30216 & 30277, dolžina podajanja os X: 1.000 mm, potovalna razdalja osi X: 1.000 mm, Univerzalni rezkalni stroj za kov Proizvajalec: MAHO Model: MH 1000 Na voljo 2 kosa! x-hod 1000 mm Vpenjalna glava SK 40 Digitalni prikaz. Glava nagibna +/-. Miza nagibna in vrtljiva +/-. Hnsdjp S Schspfx Ah Hot Pomik pinole. - 3-osni digitalni prikaz - Univerzalna miza 1.250 x 740 mm (T-utori 16 mm) - Vertikalna rezkalna glava SK 40 z navojem S 20 x 2 - 6 avtomatskih pomikov pinole 0,02/0,03/0,05/0,08/0,12/0,20 mm/obrat - Centralno mazanje, ročni pogon Stroj je mogoče ogledati. Takoj pripravljen za uporabo. Prosto naloženo, prevoz ni problem.

Leto izdelave: 2024, stanje: novo, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup covers multiple tool stations and provides instant feedback regarding the feasibility and handling of the product. Delem-69T Features: • 3D and 2D graphical touchscreen programming operation • 3D visualization in simulation and production • 17-inch high-resolution TFT color display • Complete Windows application suite • Compatible with Delem Modusys (module scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software • Major contribution to environmental protection, climate change, and the greenhouse effect; future generations will thank us! AD-S 30175 with Y1, Y2, X and R axes Bending force: 175 tons Bending length: 3050 mm Clearance between uprights: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Installation height, tool clearance, and ram depth of your press brake: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 pc Backgauge fingers: 2 pc Press force and speed of the press brake. X-axis: 500 mm/sec X-axis travel: 650 mm Max. R axis speed: 350 mm/sec R axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight: approx. 11,500 kg Control: Delem-69T Options: Y1, Y2, X, R (4-axis) X=650mm X, R Control – CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation software CNC-controlled hydraulic crowning Movable front support arms with T-slot, quick stop, and full-length guide Backgauge: Siemens DC servo motor with linear guide and ball screw system Protective cover CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) Wila hydraulic upper tool – NSCL-I-HC/UPB – PRO – Max load 180 t/m – Powerpack required Wila hydraulic lower tool – NSCR-I-HC-CNC/UPB – PRO – Max load 200 t/m – Powerpack required Powerpack for hydraulic clamping DAM (Durma angle measuring system) Hodpfx Asd Tpadsh Hsnt 2 YEARS WARRANTY The machine can be inspected and demonstrated at any time by appointment in our showroom in Staufenberg. Additional machines are ready for demonstration at our facility in Staufenberg. Further information is available upon request.

Leto izdelave: 2022, stanje: novo, Grinding diameter: 260 mm Grinding length: 1000 mm Centre height: 130 mm Grinding wheel dimensions: 400x60x127 mm Grinding wheel speed: 1700, 1900, 2200 rpm Grinding spindle head swivelling: +/- 30 degrees Table swivelling: +/- 9 degrees Tailstock spindle taper: MT 4 Grinding spindle motor: 4 kW Hydraulic motor: 1.5 kW Workpiece spindle motor: 0.37 kW Hnjdpfxsg N Nh Do Ah Het Net weight: 2400 kg Gross weight: 2950 kg PLC control: Siemens S7 Tailstock quill stroke: pneumatic via foot switch Control panel: New Rittal control panel with Siemens touchscreen display Centres: 2 Grinding wheel flanges: 2 New external cylindrical grinding machine, manufacturer Kraft, model URS 1000, year of manufacture 2022. An unused machine base of a hydraulically operated URS 1000, as well as unused cast components, were used for the manufacture of this machine. The offered machine URS 1000 CNC is equipped with 2-axis ball screw drives, axis drives, and a PLC control system. The user-friendly Siemens PLC S7-1200 is used as the control. The entire machine features an effective partial enclosure. With the Siemens PLC S7, multiple diameters can easily be programmed and ground. Furthermore, the machine is suitable for the following operations: longitudinal grinding, plunge grinding, stepwise plunge grinding, automatic dressing, and dressing compensation. Up to 30 individual programs can be stored, and 10 programs (10 diameters) can be linked in one cycle. The operator can interrupt the cycle at any time to measure the workpiece, enter compensation, and finish grind to final dimension. The control interface is very easy to use! The production of curves, radii, and ellipses is not possible with this control system. Please note that the performance data of the machine should be considered provisional, as they are based on the original hydraulically operated machine. For further technical data, as well as information on standard and special accessories, please refer to the attached PDF. Take advantage of the attractive leasing and hire purchase conditions offered by ABC Leasing. Contact us for more information. Of course, we also provide delivery, installation/commissioning, and turnkey handover, as well as control system training.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Hnjdpfxetqf Rzs Ah Hst Tailstock: Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Stanje: dober (rabljeno), Heiber Schröder CE 1000-2 – stroj za oblikovanje pladnjev Stroj z dvema linijama, proizvedenega pri Heiber & Schröder, Nemčija. Proizveden leta 2011. Opis: Stroj lahko proizvaja embalažo, kot so pladnji, pladnji z pokrovi, pladnji, ki ne prepuščajo (zatesnjeni – obloženi s PE folijo na notranji strani), pladnji v obliki školjke (za hamburgerje), pomfrit, azijska hrana (stožčasta oblika) in še več. Hnjdpfxszz Hgks Ah Het Vključuje dokumentacijo, orodja, dodatno opremo in sistem za nanašanje toplega in hladnega lepila Nordson.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 900 mm, TEHNIČNI PODATKI Največja dolžina brušenja: 900 mm Razdalja med centri: 600 mm Višina centrov (standard): 125 mm Višina centrov z vmesnimi bloki na glavi in konjičku: 175 - 250 mm Hnjdpfsytf Tbsx Ah Hjt Največji premer nihanja z vmesnimi bloki: 350 - 500 mm Zasuk mize / na vsako stran: 10° Zadrževalni čas pri povratnem gibanju mize: 0 - 5 s Premer / širina / odprtina: 250 x 13 x 76 mm Hitrost vretena brusnega kolesa: 360 min⁻¹ Prečni pomik glave brusnega kolesa: 285 mm Hitro pomikanje glave naprej in nazaj: 40 mm Prekinjeno podajanje na eno obrat mize: 0,001 - 0,03 mm Mikrokorektor podajanja, 1 delitev skale: 0,001 mm Delovne hitrosti brezstopenjsko nastavljive (normalno / posebno): 20 - 400 / 10 - 400 min⁻¹ PODROBNOSTI O STROJU Vrsta krmiljenja: konvencionalna

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, temperatura: 1.700 °C, Število komor: 1, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, vrsta goriva: električni, Oprema: CE označba, Odlično stanje: Uporabljen vakuumski peč za visoke temperature PVA TePla COV 733 RS Stanje in pogoji prodaje: Prosimo, upoštevajte: Peč se prodaja izključno v stanju, v kakršnem je ("AS IS, WHERE IS") neposredno iz našega skladišča. Peč je bila strokovno razstavljena iz delujočega okolja čistih prostorov (cleanroom). Vse žice in priključki so natančno označeni za enostavno ponovno sestavo s strani kupca. Opomba za popolno preglednost: Dva notranja grafitna grelna elementa sta bila poškodovana med procesom razstavljanja in ju bo treba zamenjati. V nasprotnem primeru je oprema 100 % popolna in pripravljena za takojšnjo namestitev. Priporočamo in vas vabimo, da pred nakupom fizično pregledate opremo v našem skladišču v bližini Białystoka na Poljskem. ##### Odlično stanje: Visokotemperaturni vakuumski peč PVA TePla COV 733 RS Stanje in pogoji prodaje: Prosimo, upoštevajte: Peč se prodaja izrecno v stanju "kot je" (AS IS, WHERE IS) iz naše lokacije. Peč je bila strokovno razstavljena iz delujočega okolja čistih prostorov. Vse žice in priključki so natančno označeni za enostavno ponovno sestavo s strani kupca. Opomba za večjo preglednost: Dva notranja grafitna grelna elementa sta bila poškodovana med procesom razstavljanja in ju bo treba zamenjati. V nasprotnem primeru je naprava 100 % popolna in takoj pripravljena za prevoz. Stranko vabimo, da napravo predhodno pregleda v našem skladišču v Białystoku na Poljskem. Pregled opreme: Pečna komora je v celoti izdelana iz nerjavečega jekla, dvojna stena je namenjena hlajenju z vodo. Horizontalna zasnova omogoča enostavno nalaganje in razkladanje ter dober dostop za vzdrževanje in servis. Notranja grafitna škatla omogoča natančno usmerjanje procesnih plinov. Opremljena z grafitnimi komponentami, ki so bile očiščene po uporabi. Avtomatski nadzor celotnega procesa. Uporabna komora (širina x višina x dolžina): 840 x 815 x 1000 mm. Skupna dolžina grafitne škatle: pribl. 1100 mm. Najvišja delovna temperatura pri delnem tlaku: 1500 °C. pri vakuumu: 1700 °C. Enakomernost temperature: ± 10 K. Nihanje temperature v stabilnem stanju: ± 5 K. Območje procesnega tlaka: 1×10-2 < p < 1040 mbar. TEHNIČNE SPECIFIKACIJE COV 733 RS Delovna temperatura: maks. 1700 °C Maks. dimenzije obremenitve: 840 x 815 x 1000 mm Uporaben volumen: pribl. 685 L Enakomernost temperature: ± 10 K Napajanje: 3 x 400 V (50 Hz) Maks. dovoljene fluktuacije napetosti: ± 5 % Vgrajena grelna moč: maks. pribl. 190 kW Črpališka postaja - Končni tlak v prazni, čisti in hladni peči: < 1×10⁻² mbar - Električna moč črpališke postaje: pribl. 14 kW Stopnja puščanja: < 5×10⁻³ mbar·L/s Hladilna voda - Pretok hladilne vode: pribl. 150 l/min - Temperatura hladilne vode: 20 ≤ TCW ≤ 30 °C Hedpfxjzkwp Ie Ah Hjnt - Tlak hladilne vode: 2 ≤ PCW ≤ 4 bar Zahteve glede kakovosti hladilne vode v skladu s specifikacijo: PW 800 943 ND. Dovod plina: Stisnjen zrak: za aktiviranje ventilov (PVA) 4 ≤ PVA ≤ 5 bar Stranka mora zagotoviti napravo za vzdrževanje stisnjenega zraka. Dušik: Tlak na dovodnem mestu plina (PN2) 5 ≤ pN2 ≤ 7 bar Vodik: Tlak na dovodnem mestu plina (PH2) 5 ≤ pH2 ≤ 7 bar Zahtevana površina - Širina x globina x višina, ki jo je treba določiti v posvetu s stranko - Površina, ki jo je treba določiti v posvetu s stranko Fundacija: ravna površina, posebne priprave niso potrebne.