Uwm nakup rabljenega (33)

Stanje: novo, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting area at 90 degrees (round): 227 mm Cutting area at 90 degrees (square): 220 mm Cutting area at 90 degrees (flat): 260 x 220 mm Cutting area at 45 degrees (round): 150 mm Cutting area at 45 degrees (square): 145 mm Cutting area at 45 degrees (flat): 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Hnedpfofgyh Eox Ah Dou Mitre band saw - automatic cutting - base frame - coolant pump - chip brush for saw blade cleaning - quick-adjust vice

Stanje: novo, Load capacity 2.2 t Hnsdpfxolwt Awj Ah Dou Workpiece diameter 101 - 1524 mm Infinitely variable feed speeds 0 - 3600 mm/min Wheel diameter 254 mm Wheel width 76 mm Total power requirement 0.5 kW Machine weight approx. 0.245 t Space requirement approx. 1.02 x 0.82 x 0.5 m including foot switch and remote control

Stanje: novo, Load capacity 5.0 t Workpiece diameter 303 x 2438 mm Feed rate steplessly adjustable 0 - 1745 mm/min Wheel diameter 305 mm Hnsdpslwt Azefx Ah Dsu Wheel width 100 mm Total power requirement 0.5 kW Machine weight approx. 0.37 t Space requirements approx. 1.5 x 1.05 x 0.7 m Including foot switch and remote control

Stanje: novo, Drilling capacity in steel (diameter): 40 mm Throat depth: 330 mm Hedpfx Asqwd A Ash Djnu Drilling stroke: 190 mm Spindle taper: MT 4 Table: 500 x 400 mm Column diameter: 140 mm Speed range: 90 - 1500 rpm Total power requirement: 2.2 kW Machine weight approx. 435 kg Dimensions (L x W x H): 570 x 930 x 2170 mm Equipment: - Automatic feed, 0.1 - 0.16 - 0.24 - 0.33 mm/rev - 8 gear speeds - Forward and reverse rotation - Emergency stop - Machine lamp - Coolant system

Stanje: novo, Load capacity 1000 kg Workpiece diameter 20 - 800 mm Hnedsupxkkjpfx Ah Dou Drum diameter 200 x 50 mm Feed rate 80 - 1600 mm/min Total power requirement 0.23 kW Required space approx. 2 pcs. 0.45 x 0.39 x 0.33 m SPECIAL OFFER PRICE!!!

Stanje: novo, Swing diameter over bed: 320 mm Swing diameter over cross slide: 200 mm Turning length: 900 mm Swing diameter in gap: 320 mm Spindle speed: 75 - 2000 rpm Centre height: 160 mm Spindle bore: 38 mm Tailstock quill taper: MT 3 Connection voltage: 400 V Total power requirement: 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m SINO digital readout 3-jaw chuck 160 mm 4-jaw chuck 160 mm Faceplate 250 mm Fixed steady rest Quick-change tool post with 4 tool holders Machine lamp Chip tray, chip guard Hardened and ground bed ways Hnodpfx Aohwavrsh Dsu Chuck guard Machine tools

Stanje: novo, Delivery pressure 13 bar effective delivery rate 690 L/min Hnsdefgygxjpfx Ah Dju Tank capacity 270 l / 16 bar Machine weight approx. 199 kg Motor 400V / 5.5 kW Dimensions L-W-H 1.7 x 0.6 x 1.27 m This is a high-pressure version (especially suitable for truck service or heavy-duty applications). OPTION: The UWM 7.5/690/270 can be equipped with a start unit (star-delta starter). Surcharge: €379.

Stanje: novo, Pipe diameter 50.8 mm Wall thickness 1.0 mm Hnodpfx Asupxlzjh Dju Square steel 50 x 50 x 1 mm Round steel 25 x 6 mm Machine weight approx. 46 kg Dimensions (L x W x H) 0.6 x 0.4 x 0.5 m Max. capacity / Min. radius flat / 1 1/4" / 10" C-channel 1x2" / 60" Round tube 1 1/2" / 20" Round tube 2" / 60" Roller diameter 1 1/2" Maximum pipe diameter 38 mm.

Stanje: novo, Flat bar 100 x 5 mm Square steel 16 x 16 mm Hnjdpefv H E Tsfx Ah Dou Round steel 18 mm Angle steel 100 x 8 mm Dimensions (L x W x H): 0.9 x 0.25 x 0.3 m Weight: 0.025 t Flat Bar Bending Machine

Stanje: novo, Drilling capacity in steel (diameter): 28 mm Throat depth: 320 mm Drilling stroke: 150 mm Spindle taper: Morse Taper 3 (MK 3) Table: 500 x 350 mm Column diameter: 105 mm Speed range: 75 - 3010 rpm Total power requirement: 0.9 / 1.2 kW Machine weight approx. 235 kg Dimensions (L x W x H): 1740 x 670 x 850 mm Hsdsfhk Ufepfx Ah Djnu Equipment / Features: - Automatic feed, 0.1 - 0.15 - 0.22 - 0.33 mm/rev - 4 gearbox stages - 2 electronic speeds for forward and reverse rotation - Emergency stop - Work light

Stanje: novo, Drilling capacity in steel (diameter): 20 mm Throat depth: 195 mm Drilling stroke: 80 mm Drill spindle: MK 2 Table clamping surface: 320 x 300 mm Total power requirement: 0.75 kW Machine weight: approx. 0.072 t Space requirement: approx. 0.7 x 0.4 x 1.1 m Robust bench drilling machine with self-tightening drill chuck with drilling depth adjustment with zero stop with emergency stop Hnodpfx Ahjiiq S Ne Dsu rotatable table plate

Stanje: novo, Swing diameter over bed: 400 mm Swing diameter over cross slide: 264 mm Turning length: 1000 mm Swing diameter in gap: 550 mm Spindle speed: 44 - 2000 rpm Center height: 200 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Connection voltage: 400 V Total power requirement: 1.5 / 2.4 kW Machine weight approx.: 0.9 t Space requirement approx.: 1.9 x 0.8 x 1.56 m Equipment / Accessories: - 3-axis digital readout - 3-jaw chuck, 200 mm - 4-jaw chuck, 200 mm - Faceplate, 320 mm Hjdpfx Askxhqvjh Donu - Fixed steady rest - Travelling steady rest - 4-way toolpost - Halogen machine lamp - Machine lamp - Foot brake - Removable chip tray, chip guard - Hardened and ground bedways - Complete coolant system - Chuck guard - Machine tools

Stanje: novo, Table length: 1300 mm Table width: 800 mm Lifting height: 1010 mm Load capacity: 1000 kg Minimum lifting height: 190 mm Connection voltage: 380 V Total power requirement: 0.75 kW Hjdpfxsfrztxe Ah Donu Machine weight: approx. 0.22 t Space requirement: approx. 1.3 x 0.8 x 0.2 m The hydraulic lift tables are electrically driven and operated. They are equipped with a contact strip for safe lowering operations. Widely applicable for workshops, assembly departments, loading bays, etc.

Stanje: novo, Drilling capacity in steel (diameter): 16 mm Throat depth: 185 mm Drill stroke: 50 mm End mill capacity: 20 mm Spindle taper: MT 2 Spindle diameter: mm Spindle speeds: 100–1500 / 200–3000 rpm Table travel, crosswise: 175 mm Table travel, longitudinal: 280 mm Table clamping surface: 500 x 180 mm Connection voltage: 230 V Total power requirement: 0.85 kW Hodpfxjurznws Ah Donu Machine weight approx.: 0.12 t Space requirement approx.: 0.86 x 0.6 x 0.9 m Drilling and milling machine with: - Variable spindle speed - Cross slide - Spindle head swivels 90° left/right - Feed via handwheel

Stanje: novo, Power 7.5 kW Air receiver 270 L Machine weight approx. 180 kg Space requirement approx. 1700x600x1270 mm Working pressure 10 bar Output rate 850 l/min Hjdpfegnvugsx Ah Denu Connection voltage 400 V The UWM 7.5 / 850/270 K30 + Startbox, equipped with a K30 pump and V-belt drive, is perfectly suited for use at home, in workshops, industry, and for heavy-duty applications. The Startbox is used to achieve a lower starting voltage (to reduce voltage spikes).

Stanje: novo, Table length: 1300 mm Table width: 800 mm Lifting height: 1010 mm Load capacity: 2000 kg Minimum lifting height: 190 mm Connection voltage: 400 V Total power requirement: 0.75 kW Lifting speed – upwards (unloaded): 40 sec. Lifting speed – downwards (unloaded): 30 sec. Machine weight: approx. 0.28 t Required space: approx. 1.3 x 0.8 x 0.23 m The hydraulic lift tables are electrically driven and operated. They are equipped with a contact strip for safe lowering operation. Hnjdpfxefrzt As Ah Dju Highly versatile use for workshops, assembly departments, loading pits, etc.

Stanje: novo, Table diameter: 300 mm Table load: 50 kg Hodpsfv Aztsfx Ah Donu Swivel range: 90 degrees Speed: 1 - 12 steplessly adjustable rpm Table load (vertical): 50 kg Total power requirement: 0.22 kW Machine weight approx. 0.036 t Space requirement approx. 0.45 x 0.43 x 0.38 m Welding positioner with: - Foot switch - Manually tiltable/swivellable - Stepless speed adjustment - 250 Amp welding current transmission Demonstration machine. Documentation available in English only.

Stanje: novo, Table length: 400 mm Hjdpfofv Azzjx Ah Dsnu Table width: 400 mm Table load capacity: 0.2 t Table diameter: 400 mm Swivel range: 90 degrees Rotation speed: 0.2 - 2 rpm, steplessly adjustable Vertical table load capacity: 100 kg Total power requirement: 220 kW Machine weight: approx. 0.065 t Space requirements: approx. 0.56 x 0.42 x 0.46 m Welding turntable equipped with: - Foot switch - Manually tiltable/swiveling - Steplessly adjustable speed - 400 amp welding current transmission Demo machine, documentation available only in English.

Stanje: novo, Table length: 1300 mm Table width: 800 mm Lift height: 1015 mm Load capacity: 3000 kg Minimum lift height: 220 mm Connection voltage: 400 V Hnjdpfx Aevn Uzmeh Dsu Total power requirement: 1.5 kW Machine weight: approx. 0.32 t Space requirement: approx. 1.3 x 0.8 x 0.23 m The hydraulic lift tables are electrically driven and operated. They feature a safety contact strip for secure lowering operations. Highly versatile for workshops, assembly departments, loading bays, etc.

Stanje: novo, Table diameter 450 mm Table load capacity 300 kg Swivel range 90 degrees Rotational speed 0.2 – 2 rpm, steplessly adjustable Table load capacity 300 kg vertical Total power requirement 220 kW Machine weight approx. 0.078 t Space requirement approx. 0.66 x 0.45 x 0.48 m Welding positioner with: - Foot switch - Manual tilt/swivel adjustment - Stepless speed control Hsdpfx Aeupxa Sjh Dsnu - Welding current transmission 250 amperes Demonstration machine. Documentation available only in English.

Stanje: novo, Belt width: 75 mm Belt length: 2000 mm Belt speed: 37 m/sec Hnodpevblhksfx Ah Dsu Total power requirement: 3 kW Machine weight: approx. 0.105 t Space requirements: approx. 1.2 x 0.5 x 1.0 m Belt grinding machine with: - Contact wheel: 200 x 75 mm - Continuous surface grinding table, width 75 mm.

Stanje: novo, Table diameter: 330 mm Table load capacity: 220 kg Swivel range: 135 degrees Tilting adjustment: manual/motorized manual Maximum rotation speed: 5 rpm, stepless Table load capacity (vertical): 100 kg Hnodpfx Aheh D Svcj Dsu Total power requirement: 0.125 kW Machine weight: approx. 48 kg Space requirements: approx. 640 x 440 x 630 mm Welding positioner with: - Foot pedal - Hand-operated tilting/swiveling - Stepless speed adjustment - 250 ampere welding current transmission - Bore in faceplate: 30 mm diameter, 20 mm deep.

Stanje: novo, Round material 30 x 1 mm Square material 30 x 30 x 1 mm Hjdpsh D Svnofx Ah Djnu Solid round material 16 mm Solid square material 30 x 10 mm Rotational speed 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Space requirement approx. 0.82 x 0.60 x 1.26 m Electric profile bending machine with - 5 sets of rollers 2x for round material 20 mm and 30 mm, 1x for flat material 1x for square material 1x for ? - Foot switch with emergency stop

Stanje: novo, Pipe diameter 1/4" up to max. 2" Wall thickness max. 3.0 mm Motor: 400V / 1.5 kW Weight: 90 kg Dimensions (L x W x H): 0.7 x 0.4 x 0.3 m Tube Notcher Maximum wall thickness: 3.0 mm Suitable for the following pipe sizes: Hnedpfov Skzkex Ah Deu 1/4", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Stanje: novo, Table load capacity 500 kg Hnjdpfeulbbwjx Ah Dju Table load capacity 250 kg, vertical Table diameter 550 mm Swivel range 135° (-45° to +90°) Rotation speed 0 - 5 rpm, steplessly adjustable Connection voltage 230 V Total power requirement 0.8 kW Machine weight approx. 0.255 t Space required approx. 0.82 x 0.73 x 0.71 m Welding positioner with: - Large through-hole 165 mm - Foot switch - Motorized tilting - Speed steplessly adjustable - 250 amp welding current transmission Demonstration machine, documentation only in English.