Rezkalni stroj

Deckel Maho MH 1000

Leto izdelave: 1986, Stanje: pripravljen za uporabo (rabljen), Travelling distance: 1000mm/560mm/1100mm, Tool holder: ISO 50, Quill stroke: 125mm, Spindle speed: 2000 rpm, Feed rate: 3000mm/min, Rapid traverse: 6m/min, Max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, Weight: approx. 7100kg, CNC control: 432, Operating hours: 70,771h. Documentation available. Gtjdet Tfagspfx Afqot

Stanje: zelo dobro (rabljeno), Swing diameter over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing diameter over cross slide 700 mm Spindle bore 128 mm Spindle speeds 6.4–1,600 rpm Gtsdpfx Aowhkdcefqot SIEMENS 810 D control system Various accessories MARCELS MASCHINEN CH

Leto izdelave: 1979, Stanje: pripravljen za uporabo (rabljen), Maks. brusni premer: 300 mm, Maks. brusna dolžina: 1950 mm, Maks. dolžina obdelovanca: 2000 mm Maks. hitrost podajanja: 1 – 30 m/min Dovod hladilne tekočine: 100 l/min Neskončno nastavljiv razpon hitrosti: 2.000 – 6.000 min⁻¹ (vrt/min) Vreteno: 88 mm Višina konic: 150 mm Brusni koluti: 100 – 250 mm Moč vretena: 3,5 kW Moč brusilke: 15 kW – 380 V – 50 Hz Gjdpfshq Uigsx Afqjtt

Stanje: rabljeno, Surface Grinding Machine BLOHM Type HFS 6 Serial No.: 10493 Year of manufacture: 1973 Electromagnetic Chuck 600 x 300 mm Grinding Length 600 mm Grinding Width 400 mm Table Longitudinal Travel max. 650 mm Cross Travel 350 mm Distance Spindle Center - Table Surface max. 600 mm Distance Spindle Center - Magnetic Chuck max. 517 mm Table Clamping Surface 1020 x 300 mm Grinding Wheel Diameter 300 mm Grinding Wheel Width 50 mm Grinding Wheel Bore 76 mm Table Longitudinal Feed 2-30 m/min infinitely variable Table Cross Feed 2-65 mm infinitely variable, electric Cross Rapid Traverse 3 m/min Vertical Feed 0.001 - 0.020 mm per indexing pulse Vertical Rapid Traverse 0.250 m/min Grinding Wheel Speed 1400 / 2800 rpm Hydraulic Pump Motor Power 2.2 kW Grinding Spindle Motor Power 5 / 6 kW Power Supply 380 Volt, 50 Hz Total Power Requirement 11 kW - automatic downfeed - hydraulic table longitudinal travel - grinding wheel dressing unit on spindle head - electromagnetic chuck, build height 83 mm - separate coolant system with magnetic filter in filter housing - grinding spindle circulation lubrication Geded Hbafopfx Afqstt - separate switch cabinet (800 x 500 mm) - swiveling control panel - operating manual and spare parts book Space required (L x W x H) 3000 x 2200 x 2100 mm Weight surface grinding machine 3000 kg Weight switch cabinet 200 kg Good condition

Stanje: rabljeno, Leto izdelave: 2005, X-axis travel: 1,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range – main spindle: 20 – 18,000 rpm Drive power – main spindle: 28 / 19 kW Max. torque: 121 Nm Tool holder: HSK-A63 Swiveling B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Gtjdowf Rgfjpfx Afqet Number of tool stations: 180 positions Tool holder: HSK-A63 Total power requirement: 78 kVA Machine weight approx.: 27.0 t Space requirements approx.: 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO – DMC 100 U duoBLOCK - Swiveling milling head (B axis) - NC rotary table (C axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction system - WITHOUT tools

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 92041, Table clamping surface: 410 x 900 mm Travel paths (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required space: 2,600 x 2,000 x 2,300 mm Gedsdhhprepfx Afqjtt Weight: 3,500 kg

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C4652, dolžina brušenja: 5.100 mm, širina brušenja: 250 mm, skupna masa: 9.100 kg, potrebna višina: 2.300 mm, zahteva za prostor dolžina: 9.000 mm, potrebna širina: 4.000 mm, Reform AR 51 Type 7 Surface Grinding Machine Year of manufacture: 1990 Grinding length: 5100 mm Grinding width: 250 mm Workpiece height: 220 mm Total power requirement: 36 kW Used water treatment system Gedpfstqtk Aox Afqott Overlift station, magnetic roller, pump

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Gtedpfsxp Hmasx Afqot Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Gtodpfx Aow Ucyujfqst Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, skupna dolžina: 620 mm, Mechanics: Gtjdeurw Uyopfx Afqjt All wear parts of the machine are replaced, including the infeed spindle on the X-axis. All assemblies are refurbished to a like-new condition. After overhaul, the machine is comparable to a new machine. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of the individual tables and assemblies can be restored, both the X- and Z-axis guideways are hand-scraped and brought to a like-new condition. Upon completion, the machine receives a measurement protocol in accordance with the manufacturer’s specifications. Painting: After restoring the machine’s geometry, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and newly painted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Equipment: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine weight and footprint: 2,500 kg // 2,340 x 1,445 x 1,900 mm Standard machine equipment: 1 pc. workpiece spindle headstock MK5 1 pc. operator panel 1 pc. mount for internal grinding spindle 1 pc. speed controller for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Optional: • 2-axis digital measuring system • Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds available upon clarification of technical details) • Separate low-speed setting for part alignment