Cilindrični brusilni stroj - Universal
KRAFT URS 1000 NC

Name: KRAFT URS 1000 NC
Brand: KRAFT
Availability: InStock

Leto izdelave

2022

Stanje

Novo

Lokacija

Stockstadt am Rhein Nemčija

Cilindrični brusilni stroj - Universal KRAFT URS 1000 NC

Podatki o stroju

Oznaka stroja:: Cilindrični brusilni stroj - Universal

Proizvajalec:: KRAFT

Model:: URS 1000 NC

Leto izdelave:: 2022

Stanje:: novo

Cena in lokacija

Lokacija:: D-64589 Stockstadt

Pokliči

Podrobnosti ponudbe

ID oglasa:: A6155479

Referenčna številka:: 1124-0002047

Posodobitev:: nazadnje dne 20.06.2024

Opis

Grinding diameter: 260 mm
Grinding length: 1000 mm
Centre height: 130 mm
Grinding wheel dimensions: 400x60x127 mm
Grinding wheel speed: 1700, 1900, 2200 rpm
Grinding spindle head swivelling: +/- 30 degrees
Table swivelling: +/- 9 degrees
Tailstock spindle taper: MT 4
Grinding spindle motor: 4 kW
Hydraulic motor: 1.5 kW
Workpiece spindle motor: 0.37 kW
Net weight: 2400 kg
Gross weight: 2950 kg
PLC control: Siemens S7
Tailstock quill stroke: pneumatic via foot switch
Control panel: New Rittal control panel with Siemens touchscreen display
Centres: 2
Grinding wheel flanges: 2

New external cylindrical grinding machine, manufacturer Kraft, model URS 1000, year of manufacture 2022.

An unused machine base of a hydraulically operated URS 1000, as well as unused cast components, were used for the manufacture of this machine.

The offered machine URS 1000 CNC is equipped with 2-axis ball screw drives, axis drives, and a PLC control system. The user-friendly Siemens PLC S7-1200 is used as the control.

The entire machine features an effective partial enclosure.

With the Siemens PLC S7, multiple diameters can easily be programmed and ground. Furthermore, the machine is suitable for the following operations: longitudinal grinding, plunge grinding, stepwise plunge grinding, automatic dressing, and dressing compensation. Up to 30 individual programs can be stored, and 10 programs (10 diameters) can be linked in one cycle.

The operator can interrupt the cycle at any time to measure the workpiece, enter compensation, and finish grind to final dimension.

The control interface is very easy to use!

The production of curves, radii, and ellipses is not possible with this control system.

Please note that the performance data of the machine should be considered provisional, as they are based on the original hydraulically operated machine.

For further technical data, as well as information on standard and special accessories, please refer to the attached PDF.

Take advantage of the attractive leasing and hire purchase conditions offered by ABC Leasing. Contact us for more information. Of course, we also provide delivery, installation/commissioning, and turnkey handover, as well as control system training.
Gbedpfxeg N Nh Dj Anfel

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2009

25 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 6158 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Cerkno

76 km

Večvretenska naprava
INDEXMS 25

Pokliči

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Gjdpfxeqhkuko Anfobl Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Poglej podrobnosti

Mali oglas

Offenbach an der Queich

612 km

Stroj za notranje brušenje
VOUMARD400 CNC U2 L10 T2

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> CNC retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of new control system in 2016 --> Technical Data: Grinding diameter: 20 - 300 mm Gbjdpfx Asw Intasnfsl Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm Z-Axis Grinding Table Stroke (total): 650 (950) mm Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed speed: 0 - 9.99 m/min Feed rate: 0 - 99.99 m/min Incremental feed per reversal: 0 - 0.999 mm X-Axis Grinding Table Stroke (total): 150 mm Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min / rev Grinding feed speed: 0 - 5 m/min / rev Feed rate: 0 - 99.99 m/min / rev Incremental feed per reversal: 0 - 0.999 mm / Ø Workpiece spindle head swiveling range: B axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") U-Axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min Centre height above work table: 200 (300) mm Centre height above grinding table: 330 (430) mm Workpiece spindle bore: 50 (70) mm Original year of manufacture: 1988

Poglej podrobnosti

Mali oglas

Tračna žaga - vodoravna BERG & SCHMID K-tech DG 62/45 HA-I

Nemčija

650 km

Tračna žaga - vodoravna
BERG & SCHMIDK-tech DG 62/45 HA-I

Pokliči

Stanje: novo, Cutting capacity at 90° (round): 510 mm Cutting capacity at 90° (square): 450 mm Gbedpfx Ajd Iipmsnfsl Cutting capacity at 90° (rectangular): 650 x 450 mm Blade speed: 15 – 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter bandsaw K-tech DG 62/45 HA-I • 2-column miter bandsaw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator • Heavy-duty material inlet roller • Removable chip tray (disinfection) • Energy-saving and low vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure regulation valve • Hydraulic control of saw frame and clamping vice • LEDs for monitoring all safety functions • Large-diameter drive wheels (520 mm) • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to material start or, in series cutting, directly cut 4. Saw blade off 5. Raise frame just above the material 6. Clamping vice opens

Poglej podrobnosti

Mali oglas

Frezalni stroj za vrtanje plošč - Horizontalni UNION BFP 130/6

Nemčija

614 km

Frezalni stroj za vrtanje plošč - Horizontalni
UNIONBFP 130/6

Pokliči

Stanje: rabljeno, Technical details: Spindle diameter: 130 mm Drilling depth: 1380 mm X-travel: 2500 mm Gbodevr S Uljpfx Anfel Y-travel: 1600 mm Z-travel: 380 mm W-axis: 900 mm quill stroke U-axis: 320 mm slide stroke Control system: on request Tool holder: ISO SK50 Feed rate: cross slide: 4.5–180 rpm Spindle speed: 4.5–900 rpm Feed rate (X/Y): 5–2000 Total power requirement: approx. 40 kW Approx. machine weight: approx. < 35 t plus additional equipment The machine can be offered in four different sales options. Please select: 1. The machine is in like-new mechanical condition, as is/where is. 2. The machine as is/where is, incl. plate table 4000x2000x300 mm = stock no. 1101081 3. The machine rewired, with new electrical cabinet, digital display, with 4 axes, Siemens AC drives, Siemens axis motors (50A/31Nm), with 12 months warranty on all new parts. 4. Optional additional equipment can also be offered, e.g. coolant system, chip conveyor, enclosure, etc. Let's discuss your specific needs. Best regards.

Poglej podrobnosti

Mali oglas

Offenbach an der Queich

612 km

Oblikovalec zobnikov
LORENZSN 4

Pokliči

Stanje: rabljeno, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Gbjdjtycg Sopfx Anfjl Equipped with rack shaping device Change gear set Year of manufacture: approx. 1981

Poglej podrobnosti

Mali oglas

Industrijski ultrazvočni čistilec ( kopel ) MAGET MM COMPANY UEC300 4G

Bela Palanka

664 km

Industrijski ultrazvočni čistilec ( kopel )
MAGET MM COMPANYUEC300 4G

14.500 €

Fiksna cena plus DDV

Leto izdelave: 2025, stanje: novo, Ultrazvočna kad UEC 300 je industrijska rešitev za čiščenje velikih in težkih delov, ki so močno umazani. Naprava je opremljena s pnevmatskim dvigalom s kapaciteto do 200 kg. Delovna frekvenca znaša 28 kHz s sweep tehnologijo. Stroj obsega glavno ultrazvočno kad s tremi stranskimi ultrazvočnimi piezo pretvorniki ter dodatno nadglavno kad z oljnim separatorjem. Upravljanje poteka preko visokokakovostnega HMI zaslona na dotik z 3D prikazi obvestil. Celotna kad je izdelana iz kislinsko odpornega nerjavečega jekla AISI304 s debelino 2 mm. Tehnične lastnosti: Dimenzije platforme: 900x570 mm Največja nosilnost: 200 kg Uporabna višina: 400 mm Ultrazvočna moč: 3 kW (6 kW p-p) Ultrazvočna frekvenca: 28 kHz s sweep funkcijo Moč grelca: 9 kW OPREMA: 7" zaslon na dotik z 3D obvestili Avtomatski sistem za polnjenje vode Avtomatski način delovanja dvigala Senzor nivoja tekočine Senzorji položaja dvigala Senzor pokrova Garancija: 2 leti NA ZALOGI IMAMO TUDI DRUGE MODELE Gbsdpfx Anogd Uifsfsl

Poglej podrobnosti

Mali oglas

Nemčija

653 km

HERMLE C40U Dynamic
HERMLEC40U Dynamic

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 35.044 h, največja hitrost vretena: 10.000 obr/min, skupna višina: 3.000 mm, skupna širina: 2.500 mm, skupna masa: 11.000 kg, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, moč vretenovega motorja: 16.800 W, največja dolžina izdelka: 2.500 mm, obremenitev mize: 500 kg, teža orodja: 8.000 g, število mest v zalogovniku orodij: 82, število osi: 5, This 5-axis universal machining center, HERMLE C40U Dynamic, was manufactured in 2011. It offers a travel distance of 850 mm on the X-axis, 700 mm on the Y-axis, and 500 mm on the Z-axis. The machine features a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 38 positions, plus an additional 43 positions. If you are seeking high-quality machining capabilities, consider the HERMLE C40U Dynamic, which we are offering for sale. Please contact us for further details. • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tools/Magazine: • Number of magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll coolant system • Renishaw OMP 40 touch probe • ICS (internal spindle coolant) • Laser beam monitoring • Chip conveyor Gbsdpfey Al Ufsx Anfjl • SK 40 • Operating voltage: 400 V/3~ • Mains frequency: 50 Hz • Control voltage: 24 V- • Total rated current: 60 A • Total power: 41 kVA Additional Equipment • OPTIONAL at extra cost: Tool package available: approx. 530 tools • OPTIONAL at extra cost: Zero-point clamping system The machine was serviced by HERMLE in 2025. In August 2025, the spindle head was replaced and the geometry was rechecked and readjusted by a HERMLE technician. Technical Specification Taper Size SK 40

Poglej podrobnosti

Mali oglas

Vertikalni obdelovalni center FANUC ROBODRILL T14-iBL

Nashik

6.037 km

Vertikalni obdelovalni center
FANUCROBODRILL T14-iBL

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 7.600 h, Funkcionalnost: popolnoma funkcionalen, *FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 osi)* Kategorija: Vertikalni obdelovalni centri (VMC) Referenčna številka: 311119 Delovna kapaciteta: 700 x 400 x 330 mm Leto izdelave: 2000 Tehnične specifikacije: VRETENO Stožec vretena: BT 30 Hitrost vretena: 8000 RPM Moč motorja vretena: 3,7 / 5,8 kW DELOVNA KAPACITETA Pomiki (XYZ): 700 x 400 x 330 mm Gedpfx Aox Ehi Ienfobl Vodilni sistemi: LM (linearni) ATC Kapaciteta menjalca orodij: 14 orodij CNC Krmiljenje: Fanuc 16iM Dodatne podrobnosti: Z Nikken 170 4. osjo

Poglej podrobnosti

Mali oglas

Navpični obdelovalni center Mazak Nexus VCN-410A

Bienne

599 km

Navpični obdelovalni center
MazakNexus VCN-410A

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 163341, Country of manufacture: UK Voltage: 400V 3-phase AC, 50/60 Hz, max 58A Dimensions: 200 x 260 x 250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capabilities Table dimensions: length 900 mm / depth 410 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed range: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power rating: 7.5 kW Feed Rates Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900 x 410 mm T-slot size (ISO R299): 18 mm / number: 3 / spacing: 125 mm Permissible load: 500 kg Floor to table surface height: 780 mm ATC Tool Magazine Number of tool positions: 30 Tool selection: free station number choice; automatic bi-directional search Tool shank: MAS BT-40 Max tool diameter in magazine: Ø 80 mm (Ø 125 mm without adjacent tools) Max tool weight: 8 kg Max total tool magazine load: 120 kg Max tool length: 350 mm Tool change time: 2.9 sec (chip-to-chip) Godpfxjw T Tp Rs Anfebl Reservoirs Lubricating oil tank: 1.8 L Feed lubrication tank: 260 cm³ Spindle cooler tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed Air Pressure: 0.5 to 0.9 bar Flow rate: 200 L/min All technical information provided subject to errors and omissions.

Poglej podrobnosti

Mali oglas

Horizontalni obdelovalni center OKK HM1250S

Contamine-sur-Arve

667 km

Horizontalni obdelovalni center
OKKHM1250S

Pokliči

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 45 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 1700/1400/1240 mm - Rapid traverse speed (X/Y/Z): 48 m/min - Feed speed (X/Y/Z): 20 m/min SWIVEL AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 - Tool change time: 6 s PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1250x1250 mm - Number of pallets: 2 - Max. pallet load: 3,000 kg - Distance from table center to spindle nose: 70–1470 mm - Max. workpiece diameter: 1,970 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Machine weight: 32,500 kg MACHINE HOURS - Power-on hours: 34,422 h Gbjdpfxow D Hwwj Anfsl ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Synchronized tapping - 3-color status light - Coolant tank * with high-pressure pump: 70 bar * internal coolant supply (through-spindle coolant) * paper filter * coolant chiller * cabin washing system - Chip conveyor - Tool measurement probe - Workpiece measuring probe: Renishaw RMP60 - Electrical transformer

Poglej podrobnosti

Oglašujte tukaj