Atm Recyclingsystems Gmbh Vibracijsko Sito nakup rabljenega (69.652)

Stanje: dober (rabljeno), Leto izdelave: 2013, moč: 4 kW (5,44 KM), obratovalni tlak: 10 letvica, Oprema: hladilni sušilnik, Schneider Unimaster batni kompresor UNM STS 660-10-500 XSDK 2 cilindra, zvočno izoliran, Sesalna zmogljivost 660 l/min, Dobava 520 l/min, 10 barov, Motor 4 kW, 380 V, 50 Hz, Prostornina rezervoarja 500 litrov, popolnoma opremljen z: Ledpfx Aljy E Iz Tj Nork Hladilni sušilnik DK 600 ECO, Separator olje/voda ÖWAMAT 10, Samodejni izpust kondenzata ECOMAT, Predfilter in fini filter, kot videno, lokacija Seevetal, Vmesna prodaja pridržana

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 512 mm, skupna višina: 1.952 mm, skupna dolžina: 772 mm, Direct from the manufacturer, the original from Apfel GmbH. Fully assembled, including: - 2 shelves KRB 4700 - 1 storage bin KEN 6422 (No. 62) - 2 storage bins KEN 4322 (No. 42) - 1 waste bin made of galvanized sheet metal - 2 brooms - 1 hand brush - 1 dustpan - 1 set of shadow boards Lredpfx Alsuvigpo Njk - 1 compartment for cleaning agents - 4 swivel castors with locking brakes Load capacity: 400 kg Dimensions: 512 W x 1,952 H x 772 D (mm) Frame powder-coated in black-grey RAL 7021 (body) Various versions and custom solutions available—we as the manufacturer are happy to support you with your requirements! (See pictures 3+4)

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, gradbena višina: 2.200 mm, število vreten: 3, zahteva za prostor dolžina: 5.000 mm, potrebna širina: 5.500 mm, številka stroja/vozila: 50844458, stopnja avtomatizacije: samodejen, proizvodna zmogljivost: 3.000 enota/h, We are offering this used PIA Automation production line for surgical disposable masks, year of manufacture 2020. The line was operated for only 2.5 years in single-shift operation and its condition can be described as "very good." In addition, the production line includes an integrated compressed air supply as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks. Ledpfxey Ddnms Al Nork Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Supply line circuit protection: 25 A Short-circuit rating: < 10 kA Concept: The line consists of a total of three modules, connected via conveyor belts. In the first segment, the individual consumables are fed by rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished masks are then transported to the next modules via a step conveyor and transport belts. These modules are arranged in parallel, where the ear loops are automatically fed and welded to the masks. If you have any questions or need further information, feel free to send us a message or give us a call.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) Ljdpoyx Hrkofx Al Nerk • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, model krmilnika: SPS-Steuerung, delovna širina: 300 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, število predalov: 1, natančnost pozicioniranja: 1 mm, delovna višina: 30 mm, delovna dolžina: 400 mm, delovno območje: 400 mm, Oprema: CE označba, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs Lrsdpfx Aloyx Hgbj Nok • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: rabljeno, Leto izdelave: 1994, Mehanska enota za sortiranje in transport Lrsdpfx Aowtnl Uel Nsk

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ponujamo nov stroj LOWA GmbH Abfüll- und Verschließsysteme WK12-17 za polnjenje in zapiranje steklenic, letnik 2025. Proizvajalec: LOWA GmbH Abfüll- und Verschließsysteme Model: Zapiralni stroj WK12-17 Tip stroja: Stroj za polnjenje in zapiranje steklenic Letnik izdelave: 2025 Stanje: novo Lrjdpfx Aoyybh Ael Nek ID kategorije: 679 Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V primeru vprašanj me lahko kadar koli kontaktirate po e-pošti. Lrjdpjya H Uyefx Al Nek Lokacija stroja je v Laupheimu.

Stanje: rabljeno, Machine weight approx. 110 kg Space requirement approx. 950 x 435 x 980 mm The newly developed "mti inverter series" from ESS for single-phase welding machines, which has already proven itself thousands of times, is now being extended to a three-phase system. The combination of semiconductor technology, resonant inverter circuits, and classical transformer technology once again enables the integration of their respective advantages into state-of-the-art welding equipment. Lrjdpfswf Rg Sex Al Nek --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Adjustment range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: integrated

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Lodpfx Aewf Rgrsl Nerk Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Ljdpfowf Rg Eex Al Nork Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine designed for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In practical use, the SHARC process achieves higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the transition zones, and, if required, dispensing with additional filler materials). --> Technical data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power consumption: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. Lsdpfjwf Rgxsx Al Nork In use, the SHARC process results in higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, less hardening of the transition zones, and if required, the possibility to forgo filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Setting range: 10 - 320 A Setting range electrode: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 A Duty cycle 100%: 260 A Cooling type: F Protection class: IP 23

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2027 – 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY. ==> Info for manufacturing companies or dealers with in-house production: It is possible to purchase drawings, rights, spare parts, customer and prospect data, as well as planning and production documents (including plans for a variant with 9 tonnes pulling force) for the broaching machine from us. If interested, please contact us. ==> We currently have a used machine available that is currently being overhauled. If interested, please inquire promptly. ==> Our new machines are built to order according to customer specifications. Short lead times for manufacturing and delivery are possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special needles for internal splines, etc.) and accessories available on request. Please inquire separately. All broaching tools and holders from other manufacturers can be continued to be used with our broaching machine! Complete production and assembly take place at our factory in Germany. Additionally, we offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, as well as all other required components – including electrical parts). Lredpfx Alsuqbnhe Nok Vertical Broaching Machine Type SRM 2027 – NEW MACHINE: The main application is for the manufacturing of keyways from 3–28 mm (and beyond), as well as profiles of similar dimensions. The compact, space-saving design allows the machine to be used successfully in small, medium, and large businesses. Its attractive price makes it suitable for small production runs and single-item manufacturing. The drive is via a pole-changing geared brake motor. The maintenance-free double spindle drive ensures smooth operation, a central traction point, and constant cutting performance. The open work table allows large workpieces to be loaded without obstruction. In most cases, the workpieces do not need to be firmly clamped. Stroke adjustment is achieved via adjustable limit switches with stroke limitation. For short hubs/workpieces, several pieces can be stacked for processing at once. Broaching needles, mandrels, and spare parts available upon request. Technical Data: Pulling force: 60 kN at 3 m/min, 40 kN at 6 m/min Broaching speed: 3 m/min + 6 m/min (optional: stepless speed adjustment from 0 to 6 m/min via extended electronics) Return speed: 6 m/min Stroke: 1,050 mm Broaching tool length: 1,200 mm Workpiece diameter: unlimited Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Total machine height: 1,510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volts 50 Hz Control voltage: 230 Volts Operating voltage: 400 Volts 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant device: Standard equipment The machine complies with the current Machinery Directive and carries the CE mark.

Leto izdelave: 2013, stanje: rabljeno, Proizvajalec: PAUL VON DER BANK GMBH, Tip: Robotska varilna naprava, Leto izdelave: 2013, Serijska št.: 13.536, Varilni vir, proizvajalec Fronius, tip CM TransPuls Synergic 4000, Hladilna naprava, Varilna enota VR7000CMT, Programirni terminal RCU5000I, Obratna miza, Varilni robot, proizvajalec KUKA, tip KR5-2ARC, Robotska krmilna enota KRC4, Odsesovalna naprava, proizvajalec Plymovent – naprava ni priključena Lrsdeyx Exvjpfx Al Nsk

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21_0346, NEW – UNUSED High-performance positioner for manual or robotic welding – lifting and rotating device. Special equipment for specific applications, designed and manufactured by FÖRSTER Welding Systems GmbH. Maximum workpiece diameter: 2500 mm Maximum workpiece weight: 20 tons Dimensions of the welding positioner: 7000 x 3000 x 3750 mm Weight (without counterweight): 20,000 kg Ledpfxeurlcro Al Nork Overall dimensions of the entire system: 8900 x 4800 x 3750 mm Total weight of the entire system: 40,000 kg Counterweight included in the scope of delivery. Complete documentation available. Technical support from the manufacturer is available upon request. The machine is located in central Poland.

Stanje: rabljeno, Trivaljni valjar za testo Lrsdpfx Aoy Akd Eol Njk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 21 A, vrsta vhodnega toka: Enosmerni tok, volumenski pretok: 6.045 m³/h, skupna masa: 1.100 kg, ODSESOVALNIK ALKO ECO JET 60/5 HD Lrodpfxoyrqnzo Al Nok Odvod žagovine, odvod prahu, samočistilni filter, podtlak ALKO ECO JET Filter se pnevmatsko čisti z impulzi stisnjenega zraka med delovanjem, kar zagotavlja visoko učinkovitost naprave. Idealen za vse vrste suhega prahu pri različnih tehnoloških postopkih. Možna je menjava filtrirnih vreč glede na zahteve in namen uporabe.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V Ledsyxccrepfx Al Nork • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be moved directly to the workpieces to be marked. This makes it suitable for both large, heavy, and small workpieces. The powerful laser software enables text, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a hand scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 watt, 50 watt) • Laser class 1 • CE compliant, according to EU directives • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Signal light for operating status (on handheld unit) • Marking software: EZCAD • Power connection: 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of portable laser unit (handheld): 2.8 kg Lrodpfou Smcbsx Al Njk • Fiber optic cable approx. 2.50 m • Integrated extraction system

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, položaj glave za glodanje: mittig, največja hitrost vretena: 60.000 obr/min, skupna višina: 1.550 mm, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, skupna masa: 560 kg, delovno območje: 420 mm, trajanje garancije: 12 meseci, vrsta pogona: Linearmotor, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Semi-automatic depaneling / Base machine with parallel shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the growing demands of the production process. PCB panels made of various materials are separated with maximum product flexibility, precision, and throughput using dust- and stress-minimizing sawing and milling techniques. Highly dynamic linear motor axes, tools, and grippers meet the highest quality standards, guaranteeing the depaneling machine superior durability and reliability. Semi-automatic depaneling – Solutions tailored to your needs The LOW 4322 allows for fast product changeovers while maintaining short separation and handling times. Panel loading is carried out via a parallel shuttle, with pick-up and fixation via pin clamping technology, and, if required, in combination with vacuum suction cups. Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module designed as a parallel shuttle, separate left and right with sliding doors Lrjdpfext Dk Rox Al Nek • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming • Working area of 420 x 330 mm per side • Automatic cutter length compensation • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage control for slot cutters only • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant An optional dust extraction unit can be offered retrofitted if needed.

Stanje: rabljeno, Odstranjevalec oljne megle, separator emulzijske megle, rabljeni stroj Proizvajalec: IFS Industriefilter Service GmbH Tip: IFM 2000 Skupne mere: Širina: 1170 mm Globina: 700 mm Višina: 1100 mm Teža: 136,5 kg Leto izdelave: 1995 Električni podatki: 400V, 1,5 kW, 3,2 A Velikost filtra: 605 x 615 mm Ledpfx Aleyn Rmis Nork

Leto izdelave: 1999, stanje: dober (rabljeno), Funkcionalnost: omejena funkcionalnost, !!! Important!!! Lredpfx Alsyzdm Re Nsk The systems have now been dismantled. The system components can be inspected on site. For sale here are 2 fully functional SLC (Surface Like Chrome) vacuum coating systems / metallization units manufactured by PVT GmbH. A 3rd non-functional system is no longer available for sale. Complete documentation for the systems is available in paper form and will be handed over upon purchase. In order to operate the systems, a compressed air supply, power supply, and water cooling system are required and must be provided by the buyer. All other PVT processes are, of course, possible as well. The system was primarily used for processing wheel rims. Treatment of other workpieces made of aluminum, steel, or plastic is also possible, such as bathroom/kitchen fittings, motorcycle and automotive add-on parts, door and window handles, etc. What are the advantages of the SLC process compared to conventional chrome plating: - SLC coating is a high-gloss finish optically comparable to electroplated chrome - Significantly more resistant to scratches and chipping - The process is more environmentally friendly and provides outstanding corrosion resistance - Costs are considerably lower Technical data: Chamber internal dimensions approx. 1600 mm diameter, approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: available Control: Allen Bradley PLC (automatic coating process including hardware)

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F50, For sale is a FiberFlow F50 cooling die by DIL Engineering GmbH – a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). This cooling die is ideal for use in research and development, enabling the targeted production of fibrous, meat-like textures that are particularly in demand for modern meat and fish alternatives as well as for snacks and convenience products. The FiberFlow F50 is designed for a throughput of up to 50 kg/h and features a rectangular geometry for optimal flow guidance and fiber formation. The system is modular and can be configured with one or two segments as required. In addition, one or two separate cooling circuits are available, ensuring precise temperature control for consistently high product quality. Integration of inline measurement systems is possible, allowing continuous process monitoring and optimization. Special attention has been paid to hygienic design, ensuring the system meets the stringent requirements of the food industry. Thanks to its well-designed construction, cleaning is straightforward and quick, which is a particular advantage for development operations. Lrodpoy D Hrbsfx Al Nok The FiberFlow F50 is ideally suited for pilot trials, product development, and recipe optimization in the field of alternative proteins, and can be easily integrated into existing extrusion lines.

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Sušilnik je namenjen predvsem sušenju blata iz čistilnih naprav ali substrata iz bioplinskih naprav. Material, ki se vnese v sušilnik, vrtinčijo metalne gredi v sušilni komori. Dimni plini iz motorja z notranjim izgorevanjem obdajajo material in povzročajo izhlapevanje vode. Dnevni pretok ca. 10 t. Sušilnik se prodaja z vsemi pomožnimi napravami, kot so polžna dvigala, krmilna omara, dodatni gorilnik, črpalka za kislino, lopute za dimne pline ipd. Podrobnosti z veseljem osebno. Možen demontaža in dostava. Proizvajalec je na voljo za ponovno zagon. Lredeyx Iztepfx Al Nok

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 2018, Naprava za proizvodnjo endogenega plina Leto izdelave: 2018 Nova cena: 103.500,00€ neto Proizvajalec: Hammer GmbH Tip: Larus ENDOGEN-40-1,05-E vključuje regulacijo rosišča ali cp Popolnoma avtomatska regulacija zmogljivosti v območju od 50-100% Filter za saj v duplex izvedbi Lrodex An Rmopfx Al Nok