Farmet Fe500 Extruder nakup rabljenega (388)

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 120 mm vakuumski ekstruder za gumo s hladnim dodajanjem (20D), primeren za proizvodnjo gume (EPDM, SBR, NBR). Motor Siemens, 0–50 obr/min. Skupna moč 155 kW. Blodpfxoxnpx Ne Aa Rji

Leto izdelave: 2004, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42 mm Main motor power: 51 kW L/D ratio: 37 Center distance: 35 mm The extruder consists of a base frame, a gearbox, and a distribution unit with special bearings designed to ensure optimal operation under a backpressure of up to 150 bar. Bedjyg Eghepfx Aa Rjli The barrel is a modular cylindrical type with a working length of 37 diameters, divided into eight segments. Each barrel segment is temperature-controlled via forced circulation of demineralized water through horizontally drilled channels in every module. Heating is provided by cartridge heaters. The screws feature interchangeable segments and are mounted on splined shafts, allowing configuration for optimal processing based on requirements. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5 kW liquid ring vacuum pump connected to the designated module through easy-to-clean piping; extracted gases are discharged into a dedicated trap for simple cleaning. The drive includes a Siemens AC motor with 51 kW power, complete with inverter, mounted in a cabinet equipped with the required safety devices and status indicators. The integrated control panel is divided into two sections: Power supply and temperature control. The cabinet is equipped with an air conditioner. The extruder includes a closed-circuit water/water temperature control unit (pump: 1.1 kW). Chiller not included.

Leto izdelave: 1999, stanje: rabljeno, Proizvajalec: Clextral Bljdpfx Aajyy S Iyj Rji Model: EVOLUM+ 53 Leto izdelave: 1999 Tip: Dvojvijačni ekstruder Prejšnja uporaba: Kuhanje-iztiskanje v agroživilski industriji AC motor: 130 kW Dolžina vijaka: 2120 mm Elementi vijaka: nazivni premer 53 mm. L/D: 40 Cilindri: 10 enot Obrobna oprema ni vključena, je pa na voljo na zahtevo: granulirnik, dozirna enota, vodna črpalka in nova elektro omara. (Integracija je lahko predmet izvedljivostne študije in dodatne ponudbe.) Širok spekter uporabe: hrana za ribe, hrana za hišne živali, prigrizki, mesni nadomestki…

Leto izdelave: 1998, obratovalne ure: 297 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 200 mm, največja hitrost vrtenja: 3.000 obr/min, premer vijaka: 35 mm, številka stroja/vozila: E0195/10, Pas de prix de réserve – vente garantie au plus offrant ! Extrudeuse monovis avec seulement 297 heures de fonctionnement, y compris scie de tronçonnage et unité de tirage ! Hussmann ES35 x 30D DÉTAILS TECHNIQUES Diamètre de la vis : 35 mm Longueur : 30D Bsdpoyrmzqsfx Aa Rjli DÉTAILS DE LA MACHINE Puissance moteur : 16 kW Heures de fonctionnement : 297 h Scie de tronçonnage DÉTAILS TECHNIQUES Vitesse moteur triphasé : 3 000 tr/min Puissance moteur triphasé : 0,55 kW Diamètre lame : 200 mm Unité de tirage DÉTAILS TECHNIQUES Vitesse de tirage : 20/30/40/50/60 m/min Force de tirage : 11 700 / 7 800 / 5 800 / 4 700 / 3 900 N Longueur de contact : 800 mm Largeur bande max. : 160 mm Hauteur profil max. : 160 mm DÉTAILS DE LA MACHINE Puissance d'entraînement : 2 - 5,6 kW Poids : 800 kg ÉQUIPEMENT Commande électrique et électronique complète avec pupitre de commande à distance Affichage digital de la vitesse Ampèremètre Potentiomètre hélicoïdal 10 positions

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 172 mm, največja hitrost vrtenja: 49 obr/min, Over the past few years, more than €420,000 has been invested in new components and factory overhauls! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Bedpfx Ajyztagea Rjli Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing housing: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Twin-screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory overhauled in 2021, unused Main gearbox P.I.V, year 1986, factory overhauled in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory overhauled in 2020, unused Main motors Siemens, 212 kW, year 1986, factory overhauled in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust disks Note: The electrical and control systems as well as the screw segments are not included in the scope of supply.

Stanje: rabljeno, Leto izdelave: 2008, Naprava tipa MAXDROP je stroj, ki se uporablja za proizvodnjo piškotov: mafini, krhki piškoti, beljakove sladice, biskvitni piškoti in drugi. Blagovna znamka: MaxDrop 2000 Model: AL 200 Širina glave: 600 mm Spomin za 90 receptov Dimenzije naprave: 1100 x 1400 x 1375 mm Leto izdelave: 2008 Bedpfex Irkdsx Aa Rjli Napajanje: 400 V Nameščena moč: 1,64 kW Teža: 400 kg Stanje: rabljeno Originalna tehnična dokumentacija + CE izjavo.

Leto izdelave: 2024, obratovalne ure: 10 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Extrusion line with stuffing unit – ideal for recycling applications This robust and versatile extrusion line is optimally suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated stuffing unit, materials with low bulk density – such as regrind, EPS, film scraps, or other lightweight plastic waste – can be processed without any issues. Blodpjtziudefx Aa Rsi The stuffing unit reliably compacts the loose material and feeds it directly to the extruder. This ensures consistent material intake and stable extrusion, even with challenging input materials. Advantages: • Effortlessly processes all types of polyolefins • Ideal for light and voluminous materials such as EPS or film regrind • Efficient material feed thanks to integrated stuffing unit • Compact design, easy to maintain - Feeding extruder / melt extruder - Screw diameter: 145 mm - Drive: 45 kW - Induction heating - Stuffing unit - Hopper for material feed (Suitable for low bulk density material) - Large filter / screen changer - Strand die adapted

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Polži ø 90-36D, 45-30D, 45-36D. Kompaktna izvedba, ena skupna elektro omarica, zmogljivost cca 800 kg/h. Bljdpfx Aaoyilyks Rsi

Leto izdelave: 2001, obratovalne ure: 64.499 h, stanje: dober (rabljeno), Conical screws, approx. 110 kg/h A.C. motor 30.0 kW Blsdew Hy Uuspfx Aa Rei New motor, 64,499 operating hours

Stanje: dober (rabljeno), Leto izdelave: 2001, - Manufacturer: IDE - Model: 45/4 - Year of manufacture: 2001 - Single-screw extruder Ø45mm 25 L/D - Analog control on the right - Screw profile: PVC - 4 heating zones on the barrel - 4 heating zones for tooling - Motor power: 8.5 kW Bjdpfx Ajuhpiyea Reli - Throughput up to 60 kg/h Good overall condition, very clean machine

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EX-006-S25, Leto izdelave: 2022, obratovalne ure: 20 h, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 32 A, priključek za stisnjen zrak: 10 letvica, vhodna frekvenca: 60 Hz, moč: 9 kW (12,24 KM), Ponujamo nov CEAD S25 LSAM ekstruder, letnik izdelave 2022. Model: S25 Extruder Serijska številka: EX-006-S25 Vhodne faze: 3 faze Vhodna napetost: 400 V Vhodna frekvenca: 50-60 Hz Vhodni tok: 32 A Moč: 9 kW Nazivni kratkostični tok: 10 kA Tlak zraka: 6-10 bar Tlak zraka: 87-145 psi Priporočen RCD: 30 mW Bledpfx Aaoy Nk S Nj Rsi Vključena sta sušilec za pelete in podajalnik. Priloženo skoraj 2 toni peletov Airtech Dahltram® C-250CF + čistilna zmes. Za dodatna vprašanja ali informacije nam pošljite sporočilo ali nas pokličite.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Brabender enovijačni ekstruder 30 mm – 30 L/D – s K-Tron dvovijačnim dozirnikom – izstopna šoba Naprodaj je popolnoma delujoč Brabender enovijačni ekstruder v kompaktni izvedbi, idealen za laboratorijske, razvojne ali male serije. Tehnični podatki: • Proizvajalec: Brabender Blsdpfx Aaeyi Am Ro Rei • Premer vijaka: 30 mm • Procesna dolžina: 25 L/D • Pogon: 5,5 kW • Večconski ogrevalni sistem (5 con) • Kompaktna elektro omara z digitalno regulacijo temperature • Prilagojena izstopna šoba Oprema: • K-Tron dvovijačni dozirnik • Kompaktna in pregledna krmilna enota • Več ogrevalnih con z ločeno regulacijo • Temperatura in tlak mase Stanje: • Popolnoma funkcionalen • Dobro vzdrževano splošno stanje • Takoj pripravljen za uporabo Preizkus z materialom kupca je mogoč po predhodnem dogovoru.

Stanje: dober (rabljeno), Upravljalna plošča Področje uporabe: Lisec butil ekstruder LBH-25 Širina: 570 mm Bodpfoyyaunex Aa Rsli Višina: 255 mm Globina: 100 mm Teža: 2800 g Stanje: Dobro, rabljeno

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Control panel: Siemens SIMATIC HMI, connected load: 80 kW, weight: 1.85 t, operating hours: approx. 4,500 h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Complete documentation available, on-site inspection possible. Bodpov Uz Awefx Aa Rsli

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Kompletna proizvodna linija za ekstrudiranje PS-pene (kapacitet: 350kg-400kg/h) je dostupna. 1) 7x dozirnih jedinica K-Tron Švajcarska i Coperion, glavne komponente: 3, bočne komponente: 4, kapacitet: 350kg-400kg/h. 2) Primarni ekstruder Battenfeld, godina proizvodnje: 1998, prečnik puža: 120mm, menjač sita: Gneuss, dvostruka klipna pumpa: LEWA. Uključuje gasnu injekciju. 3) Sekundarni ekstruder, prečnik puža: 150mm/33D. Uključuje nekorišćenu staru mlaznicu i ko-ekstruder Kühne sa prečnikom puža 50mm. 4) Sunwell kružna glava sa grejanjem na ulje. 5) Kalibracioni trn, noževi: 2, folije: 2, širina folije: 1080mm. 6) Gloenco Double S haul-off jedinica. 7) PS rezač i navijač folije, pozicije: 4, istovremeno aktivne pozicije: 2, brzina namotavanja: 10m-30m/min, težina rolne: 150kg-300kg, dužina rolne: 500mm-800mm. Uključuje istovar sa jonizacijom. Dokumentacija je dostupna. Moguć je pregled na licu mesta. Ova linija se prodaje ISKLJUČIVO kupcima van Evrope. Blodpfx Ajxq Exqja Rei

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), A total of three extruders are available, including throughput measurement (weighing systems), cylinders in as-new condition (2018), and overhauled screws. Total extrusion output: approx. 100 kg/h. 1) DC smooth pipe extruder, power: 17 kW, machine dimensions (L/W/H): approx. 2300mm/600mm/1100mm. 2) DC smooth pipe extruder, power: 32 kW, machine dimensions (L/W/H): approx. 3000mm/700mm/1200mm. 3) DC grooved bushing extruder, power: 49 kW, machine dimensions (L/W/H): approx. 3000mm/700mm/1200mm. An on-site inspection is possible. Bsdpfx Aaevw Aqhs Roli

Leto izdelave: 1982, stanje: pripravljen za uporabo (rabljen), Na voljo je dvoopolžni ekstruder. Pogon: električni motor ASEA tip ACA 200-6L, 50,5 kW, 1460 vrt/min. Ogled je možen po dogovoru. Blsdpfjx Hifvjx Aa Rei

Stanje: skoraj kot novo (rabljeno), Edelstahl-Trichter 8 kg mit Rührwerk und Edelstahlschnecke, regelbare Geschwindigkeit, verschiedene Extrusionsscheiben für unterschiedliche Pastaformen, mobil Bedjd R D Tlspfx Aa Reli

Leto izdelave: 1979, obratovalne ure: 216 h, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Parallel twin-screw extruder Manufacturer: Hans Weber Maschinenfabrik GmbH Model: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for rigid PVC profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10,000 Nm Motor power: 3.3 - 25.0 kW Bljdpoyx Dw Dsfx Aa Rei Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Die heating zones: 8 Temperature control: 12 x digital temperature controllers KS 40 (PMA) Accessories: melt pressure sensor and melt temperature probe Connected load: approx. 60 kW (without die) Extrusion height: 1000 or 1100 mm Output capacity: approx. 150 - 180 kg/h for rigid PVC profiles Accessories: material hopper and connection fan Accessories: vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: Control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only run for 216 hours. Condition: The extruder has been newly painted (light grey RAL 7035) and functionally tested.

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Screw diameter: 59 mm, screw rotation speed: 25-250 rpm, complete documentation, control cabinet, screen changer, side feeder, granulator, and additional accessories. Bodjhtvmhjpfx Aa Rsli

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Throughput: 140-180 kg/h, screw diameter: 50-103 mm, screw length: 1,300 mm, max. screw speed: 43 rpm, installed power: 25 kW, operating hours: 62,590 h, including dosing unit with hopper, vacuum pump, barrel cooling unit, and screw temperature control. Bledpfx Aehz Dyaea Roi

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, ID skladišča 2846 Bsdoi Dtbuopfx Aa Rjli Compounder ekstruder Tip Alphatec AD-.S 75 z: segmentnimi polži, so-vrteči, tesno prilegajoči, cilindrično vodno ali medijsko hlajeni/gretji zmogljivost do 1200 kg/h – odvisno od materiala pogon 250 kW – AC 48 L/D R+W varnostna sklopka 3x cona za odplinjevanje – 1x vakuumska črpalka 2x bočna dozirnika tipa ZS-B Siemens HMI Touch krmiljenje IZBIRNO: > Filtrir/menjalnik sita za staljena masa > Sistem granulacije: Strang ST-, vodni obroč WRG ali podvodna granulacija UWG > Konfiguracija polža po vaših zahtevah > Doziranje materiala: volumetrično ali gravimetrično > Dodatna oprema Obiščite nas v naši tovarni v Wuppertalu. Oprema je pripravljena za predstavitev. Testni zagon z vašim materialom je možen po dogovoru.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 2.846 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock no. 2846 Compounding Extruder, ready for demonstration: Type Alphatec AD-.S 75 with: - Screw diameter 72 mm - Segmented screws, co-rotating, fully intermeshing, barrel water-/media-cooled/temperature-controlled - Output capacity up to 1,200 kg/h (material-dependent) - Drive 250 kW AC - 48 L/D - 3x degassing zones; 1x vacuum pump with condensate separator - 2x side feeders type ZS-B - Siemens HMI touch control system OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizing (UWG) > Screw configuration as per your requirements > Material dosing: volumetric or gravimetric > Additional accessories Bjdpfx Aoi Dtbqja Roli Visit us at our Wuppertal facility. The machine is ready for demonstration. Test runs with your material can be arranged upon request.

Leto izdelave: 2006, stanje: dober (rabljeno), Designed for COEX cast film production with an additional coating unit. Bedjpaiaiopfx Aa Rsli The extrusion section of the plant has 2 extruders; the coating unit has 1 extruder. Processing of thermoplastics in a temperature range of 90-300°C. Various production combinations are possible: - Main unit (CoEx) with coating - Main extruder (CoEx) without coating - Coating processing via winding unit on an existing base film For production in the different described combinations, unused machine components can be deactivated. POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film, if required with an oriented film - 3-layer film (A-B-A), if required with an oriented film Coating unit: - Mono film on an existing base film, if required with a second oriented film Unwinding diameter: max. 1,000 mm Permissible roll/spool weight: max. 1,500 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Twin-screw extruder / Laboratory extruder - 2 x 30 mm screw diameter - 4 heating zones - Dosing unit Bledpfou Hik Djx Aa Rsi - Control system