Tovarna za izdelavo mešanic / ekstruder

ALPHATEC AD-S 75 compounding line

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock No. 2846 Compounding Extruder Type: Alphatec AD-S 75 with: Segmented screws, co-rotating, intermeshing, Cylinder water-/media-cooled/temperature controlled Throughput up to 1,200 kg/h (depending on material) Drive: 250 kW AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders Type ZS-B Siemens control with touch HMI OPTIONAL: > Melt filter / screen changer > Pelletizing systems: strand pelletizer (ST), water ring (WRG) or underwater pelletizer (UWG) Caedpfsi Dtbiex Afqsa > Screw configuration to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled by arrangement.

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), SINGLE-SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Type: 60 X 33 Year of manufacture: 2000 Screw diameter: 60 mm Drive power: 75 kW Codpfxsifgwhj Afqeaa Output capacity (PE): approx. 200 - 250 kg/h Condition: Good, ready for operation The extruder is my property Sachal Extrusion Machines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock No. 2846 Compounding Extruder Type: Alphatec AD-S 75 with: Segmented screws, co-rotating, intermeshing, Casdpfx Aei Dtb Aofqea Cylinder water-/media-cooled/temperature controlled Throughput up to 1,200 kg/h (depending on material) Drive: 250 kW AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders Type ZS-B Siemens control with touch HMI OPTIONAL: > Melt filter / screen changer > Pelletizing systems: strand pelletizer (ST), water ring (WRG) or underwater pelletizer (UWG) > Screw configuration to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled by arrangement.

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock No. 2846 Compounding Extruder Model: Alphatec AD-.S 75 with: Segmented screws, co-rotating, tight-intermeshing, water-/medium-cooled/temperature-controlled barrel Throughput capacity up to 1,200 kg/h (depending on material) 250 kW AC drive 48 L/D R+W safety coupling 3x degassing zones – 1x vacuum pump 2x side feeders, type ZS-B Siemens HMI touch control OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand pelletizer (ST-), water ring pelletizer (WRG), or underwater pelletizing (UWG) Caodpji Dtbuofx Afqja > Screw configuration tailored to your requirements > Material feeding units: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The machine is available for demonstration. Test runs with your material can be arranged upon request.

Leto izdelave: 2018, Stanje: rabljeno, x-axis travel: 1600 mm y-axis travel: 1300 mm z-axis travel: 700 mm Distance between uprights: 1500 mm Distance spindle center to table: 225–925 mm Table size: 1800 x 1300 mm Table load: 4000 kg T-slots (Width x Spacing x Number): 22 x 160 x 8 mm Casdpfx Afshx R Dvoqea Spindle taper: HSK-A 63 Spindle speed: 24,000 rpm Spindle motor: 25/33 kW Spindle motor torque: 72.6/95.8 Nm Rapid traverse (X-Y-Z axis): 30,000 mm/min Feed rates X/Y/Z axis: 1–20,000 mm/min Tool changer: 20 positions Max. tool diameter: 100/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Total power requirement: 80 kVA Machine weight approx.: 22 t Machine dimensions (LxWxH): 5660 x 5295 x 3930 mm CNC control: Heidenhain TNC 620 Spindle: IBAG electric spindle 24,000 rpm HSK-A63 Linear scales: Heidenhain Tool changer: 20 positions Chip conveyor – spiral: 2 pcs. Used CNC high-speed portal milling machine with extensive accessories at a special introductory price. Key manufacturers of the components used in this stock machine: · Controller and servo motors by Heidenhain, model TNC 620 · Ball screw support bearing – NSK Japan · X-axis ball screw – Hiwin Taiwan · Y-axis ball screw – Hiwin Taiwan · Z-axis ball screw – Hiwin Taiwan · 3-axis linear guides – THK Japan or Rexroth Germany · Electric spindle unit – HSK A63 24,000 rpm by IBAG · Linear encoder – Heidenhain · Pneumatic system – SMC Japan · Lubrication – Showa Japan · Covers – Hema · Air conditioning – Kaokung Taiwan · Spindle water cooler – Taiwan-Punkt · 3-axis cable carrier – Igus Germany · Coupling – KTR Germany · Machine enclosure – Mecano Germany · Relay – Omron · Electrical system – Schneider Germany · MPG manual pulse generator – Tosoku Japan For further information on the machine, standard accessories, and special accessories, please refer to the attachment. We are of course happy to organize delivery to your premises including assembly/commissioning, handover ready for operation, and on-site training.

Leto izdelave: 2025, Stanje: novo, Stock No. 2846 Compounding Extruder Type: Alphatec AD-S 75 with: Segmented screws, co-rotating, intermeshing, Cylinder water-/media-cooled/temperature controlled Throughput up to 1,200 kg/h (depending on material) Drive: 250 kW AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders Type ZS-B Siemens control with touch HMI OPTIONAL: > Melt filter / screen changer > Pelletizing systems: strand pelletizer (ST), water ring (WRG) or underwater pelletizer (UWG) Cjdpfx Asd Hqa Iofqeaa > Screw configuration to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled by arrangement.

Stanje: skoraj kot novo (rabljeno), Set, packed in wooden box, screw and cylinder barrel for 150 mm extruder, grooved feed section, screw with shear and mixing section Codpfsdm Aghox Afqsaa

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Speed: 18,000 Bph 1.5L Line composed of: Blow molder: SIDEL Model: SBO 16/16 ROUE Number of cavities: 16 Type: Rotary CHILLER AND COMPRESSOR NOT INCLUDED Preform elevator Preform unscrambler Monoblock: PROCOMAC Type: Aseptic Rinser Cedpstu Hy Nofx Afqeaa Gravity filler Capper Cap type: pre-threaded plastic Sleeving machine Type: Rotary High capacity storage Steam tunnel Shrink wrapper: OCME Type: Film launch Palletizer: OCME Type: Push-type Layer pad inserter Pallet magazine Pallet wrapper: OCME

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos quickly and easily, without extensive programming knowledge. The software can automatically increment serial and article numbers after configuration. Additionally, the software is capable of extracting data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD (German/English) • Signal light to indicate operating status Caodpjqfcvisfx Afqoa • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (one-sided or double-sided) • Optional: autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height approx. 300mm • Electrically adjustable Z-axis • Laptop with mount and Windows OS • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Csdpfxjiyyndj Afqsaa Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), drive via belt pulley Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.