Tovarna za izdelavo mešanic / ekstruder

ALPHATEC AD-S 75 compounding line

Leto izdelave: 2025, stanje: novo, Stock No. 2846 Compounding Extruder Type: Alphatec AD-S 75 with: Segmented screws, co-rotating, intermeshing, Cylinder water-/media-cooled/temperature controlled Throughput up to 1,200 kg/h (depending on material) Drive: 250 kW AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator Hfodpfx Ajd Hqa Isb Eod 2x side feeders Type ZS-B Siemens control with touch HMI OPTIONAL: > Melt filter / screen changer > Pelletizing systems: strand pelletizer (ST), water ring (WRG) or underwater pelletizer (UWG) > Screw configuration to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled by arrangement.

Leto izdelave: 1987, stanje: zelo dobro (rabljeno), 1 piece Chemical Standard Centrifugal Pump with very low operating hours. The pump is suitable for sour condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Delivery head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Performance approx. at 1480 rpm (specification without guarantee): Flow rate: 430 m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and pipework in stainless steel are also available. Material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and conveying - Flue gas desulphurization plants Hodpoh S Nz Sefx Ab Eofd - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock No. 2846 Compounding Extruder Type: Alphatec AD-S 75 with: Segmented screws, co-rotating, intermeshing, Cylinder water-/media-cooled/temperature controlled Throughput up to 1,200 kg/h (depending on material) Drive: 250 kW AC Hfodpfx Asi Dtbiob Esd 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders Type ZS-B Siemens control with touch HMI OPTIONAL: > Melt filter / screen changer > Pelletizing systems: strand pelletizer (ST), water ring (WRG) or underwater pelletizer (UWG) > Screw configuration to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled by arrangement.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Št. zaloge 2846 Compoundirni ekstruder Tip Alphatec AD-.S 75 z: segmentnimi polži, so-vrteč, s tesno zaskočnimi zobci, valj vodno / medijsko hlajen/temperiran Zmogljivost do 1200 kg/h – odvisno od materiala Pogon 250 kW – izmenični tok 48 L/D R+W varnostna zobniška sklopka 3x oddušni coni, 1x vakuumska črpalka s kondenzatnim ločevalnikom 2x stranska dozirnika tipa ZS-B Siemens krmiljenje z zaslonom na dotik HMI OPTIONALNO: > Filter taline/menjalnik sit > Sistemi granulacije: Strang ST-, vodni obroč WRG ali podvodna granulacija UWG > Konfiguracija polža po meri > Doziranje materiala: volumetrično ali gravimetrično > Dodatna oprema Obiščite nas v našem obratu v Wuppertalu. Hfedpfxei Dtb Aj Ab Eod Stroj je pripravljen za predstavitev, termin testnega zagona z vašim materialom po dogovoru.

Leto izdelave: 2010, obratovalne ure: 29.000 h, stanje: zelo dobro (rabljeno), Catégorie : Extrudeuse bi-vis Numéro : DE27699 Hfjdpfx Absxykcgs Esd Fabricant : Coperion - Werner & Pfleiderer Modèle : ZSK 50 MCC+ Année de fabrication : 2010 Diamètre des vis : 2 x Ø 50,0 mm Rapport L/D : 48:1 Moteur d'entraînement : 129 kW Détails : Co-rotative, vis et cylindre segmentés, pompe à vide, thermorégulateur, 2x alimentations latérales, 1x dégazage latéral L’extrudeuse est en très bon état et n’a que 29 000 heures de fonctionnement. Options : Système de dosage 7 voies Motan Colortronic, séchoir (Motan LA 1200/4), extraction de brins IPS, convoyeur à brins, bain d’eau, granulateur, tamis vibrant – disponible immédiatement moyennant un supplément. Cette offre ne correspond pas à vos attentes ? Veuillez visiter notre site web Plama ou nous envoyer votre demande détaillée. Nous avons des solutions adaptées à presque tous les budgets dans notre gamme.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 2.846 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock no. 2846 Compounding Extruder, ready for demonstration: Type Alphatec AD-.S 75 with: - Screw diameter 72 mm - Segmented screws, co-rotating, fully intermeshing, barrel water-/media-cooled/temperature-controlled - Output capacity up to 1,200 kg/h (material-dependent) - Drive 250 kW AC - 48 L/D - 3x degassing zones; 1x vacuum pump with condensate separator - 2x side feeders type ZS-B - Siemens HMI touch control system OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizing (UWG) > Screw configuration as per your requirements > Material dosing: volumetric or gravimetric Hjdpfx Abei Dtbqj Eofd > Additional accessories Visit us at our Wuppertal facility. The machine is ready for demonstration. Test runs with your material can be arranged upon request.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3063, Rabljeni laboratorijski dvo-vijačni ekstruder Leistritz Micro27/GL-32D, stroj št. 3063 Hfedpfxeyc Sfpj Ab Eed Kataloška št.: DS27 št. 3063 Leto izdelave: 2001 Moč motorja: 10,5 kW Hitrost vrtenja vijakov do 500 obr./min Premer vijakov: 27 mm Ogrevalno/hladilne cone: 7 Območje orodij: 1 Sovrteča dvoja vijaka s gnetilnimi elementi Vijačni elementi so v dobrem stanju. Volumetrično doziranje Brabender, nameščeno na menjalnik in vključeno v dobavo. Dokumentacija v nemškem jeziku na papirju je na voljo. Glava orodja z eno-luknjasto šobo vključena Z atmosferskim odzračevalnim sistemom

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Hsdpehx Elfefx Ab Ejfd Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, leto zadnje generalne obnove: 2004, 4-Hi CRM Froehling Laminierkopf Froehling ist eine renommierte Marke, bekannt für Zuverlässigkeit und Robustheit im Bereich der Walzwerke. 4-Hi-Laminierkopf mit Biegeeinrichtung und Ab- bzw. Aufwickler. Technische Daten: Hersteller: FROEHLING (Deutschland) – 2004 generalüberholt Hedpfjg Ryqkex Ab Ejfd Verarbeitbare Materialien: Aluminiumlegierungen, Messing, Kupfer, niedrigkohlenhaltiger Stahl Bandbreite: 282 mm (300 mm) Banddicke: 0,15 – 2 mm Coilabmessung: ID 400 mm – AD 1500 mm Maximale Walzgeschwindigkeit: 400 m/min Arbeitswalzen: Durchmesser 130 mm – Tisch 340 mm Stützwalzen: Durchmesser 390 mm – Tisch 335 mm Komplett mit: Abwickelhaspel und Aufwickelhaspel Viele Ersatzsätze an Arbeits- und Stützwalzen vorhanden Verkauf erfolgt EXWORKS, demontiert und auf LKW verladen. Jederzeit zur Besichtigung für interessierte Käufer bereit. Bei Fragen stehen wir Ihnen gerne zur Verfügung. UNTERBREITEN SIE UNS IHR ANGEBOT, WIR FINDEN SICHER EINE EINIGUNG.