Tovarna za izdelavo mešanic / ekstruder

ALPHATEC AD-S 75 compounding line

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Lager-št. 2846 Demonstracijska enota, compounder ekstruder Tip Alphatec AD-.S 75 z: Segmentnimi polži, so-vrteči, tesno spajajoči, Cilinder hlajen/temperiran z vodo ali medijem Zmogljivost do 1200 kg/h - odvisno od materiala Pogon 250 kW - AC Dsdpfxoi Dtb Aj Aplekl 48 L/D R+W varnostna sklopka 3x oddušni coni, 1x vakuumska črpalka s kondenzatnim ločevalnikom 2x stranski dozirniki tip ZS-B Siemens Touch HMI krmiljenje MOŽNOST DODATNO: > Filter za talino/zamenjava sita > Sistemi za granulacijo: vlečenje – ST-, vodni obroč – WRG ali podvodna granulacija – UWG > Konfiguracija polža po vaših zahtevah > Doziranje materiala: volumsko ali gravimetrično > Dodatna oprema Obiščite nas v naši tovarni v Wuppertalu. Enota je pripravljena za demonstracijo, termin testnega zagona z vašim materialom po dogovoru.

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Dksdpfjiyyf Iox Aplsl Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock No. 2846 Compounding Extruder Type: Alphatec AD-S 75 with: Segmented screws, co-rotating, intermeshing, Cylinder water-/media-cooled/temperature controlled Throughput up to 1,200 kg/h (depending on material) Dedji Dtbiepfx Aplskl Drive: 250 kW AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders Type ZS-B Siemens control with touch HMI OPTIONAL: > Melt filter / screen changer > Pelletizing systems: strand pelletizer (ST), water ring (WRG) or underwater pelletizer (UWG) > Screw configuration to your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The system is ready for demonstration; test runs with your material can be scheduled by arrangement.

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, ID skladišča 2846 Compounder ekstruder Tip Alphatec AD-.S 75 z: segmentnimi polži, so-vrteči, tesno prilegajoči, cilindrično vodno ali medijsko hlajeni/gretji zmogljivost do 1200 kg/h – odvisno od materiala pogon 250 kW – AC 48 L/D R+W varnostna sklopka 3x cona za odplinjevanje – 1x vakuumska črpalka 2x bočna dozirnika tipa ZS-B Siemens HMI Touch krmiljenje IZBIRNO: > Filtrir/menjalnik sita za staljena masa > Sistem granulacije: Strang ST-, vodni obroč WRG ali podvodna granulacija UWG Dedpsi Dtbujfx Aplekl > Konfiguracija polža po vaših zahtevah > Doziranje materiala: volumetrično ali gravimetrično > Dodatna oprema Obiščite nas v naši tovarni v Wuppertalu. Oprema je pripravljena za predstavitev. Testni zagon z vašim materialom je možen po dogovoru.

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor Dkjdsug Ty Hopfx Apljl 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 2.846 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2846, Stock no. 2846 Compounding Extruder, ready for demonstration: Type Alphatec AD-.S 75 with: - Screw diameter 72 mm - Segmented screws, co-rotating, fully intermeshing, barrel water-/media-cooled/temperature-controlled - Output capacity up to 1,200 kg/h (material-dependent) - Drive 250 kW AC - 48 L/D - 3x degassing zones; 1x vacuum pump with condensate separator - 2x side feeders type ZS-B - Siemens HMI touch control system OPTIONAL: Dkodpfx Apei Dtbqoljl > Melt filter/screen changer > Pelletizing systems: strand (ST), water ring (WRG), or underwater pelletizing (UWG) > Screw configuration as per your requirements > Material dosing: volumetric or gravimetric > Additional accessories Visit us at our Wuppertal facility. The machine is ready for demonstration. Test runs with your material can be arranged upon request.

Leto izdelave: 1991, stanje: skoraj kot novo (rabljeno), skupna masa: 1.420 kg, največja hitrost vrtenja: 1.485 obr/min, 3 stainless steel spiral volute process pumps 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very low operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Delivery head / Pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: Single-acting mechanical seal with flushing water Manufacturer: Burgmann Impeller type: Closed radial impeller Impeller diameter: 324 mm Bearing type: Rolling bearing Lubrication: Oil Oil level monitoring Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Dedpfoqabiasx Apljkl Bearing lantern: Cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without spacer sleeve Baseplate: Painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor output P2: 75 kW Thermal class: F Motor protection: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Stanje: novo, Leto izdelave: 2024, ✅ New Equipment ✅ Top Price ✅ Immediately Available ✅ Shipping Possible ◾ SCHORR Electric High-Lift Pallet Truck ◾ Model RR12HH with 3500mm Lift Height ◾ Low-maintenance and easy to operate ◾ Includes 24V Batteries and Charging Station ◾ 1.2t / 1200kg Load Capacity ◾ Excellent Price-Performance Ratio ◾ IMMEDIATELY AVAILABLE! The electric high-lift pallet trucks from SCHORR offer an outstanding price-performance ratio. The offset drive unit allows for a small turning radius with optimum all-round visibility. Each model is equipped with a multifunctional tiller, which displays the current battery level and can be started via ignition switch. The tiller can be operated ambidextrously and also features a creep speed mode. The pallet truck design is robust and easy to maintain; impact-prone areas are fitted with flexible plastic. The emergency stop button is centrally positioned for easy access at all times. As standard, the pallet trucks feature tandem load rollers, enabling them to cross uneven surfaces such as cobblestones quietly and with minimal vibration. Technical Data Manufacturer (abbreviation): SCHORR Model Designation: RR12HHE Load Capacity: 1.2t Model: 350E Own Weight incl. Batteries: 477kg Dedpfx Apsidqr Solokl Drive: Electric Tyres: Polyurethane Basic Dimensions Overall Length: 1755mm Overall Width: 795mm Length incl. Fork Back: 605mm Lift: 3500mm Mast Height Lowered: 2224mm Mast Height Raised: 3924mm Fork Dimensions DIN ISO 2331: 60mm x 160mm x 1150mm Outside Fork Width: 570mm Aisle Width with Euro Pallet: 800x1200 lengthwise 2068mm Turning Radius: 1366mm Speed Travel Speed with/without Load: 4.0km/h / 4.2km/h Lifting Speed with/without Load: 0.09m/s / 0.14m/s Lowering Speed with/without Load: 0.11m/s / 0.1m/s Max. Gradeability with/without Load: 6% / 8% Whether you want the high-lift pallet truck delivered or would prefer to collect it from us in 48465 Schüttorf, we have the right solution for you. Please feel free to contact us. To make collections and viewings as convenient as possible, please note that these are only possible by prior telephone appointment. Would you rather finance or lease the equipment? No problem! We also offer attractive options for this. Simply ask us and we’ll advise you on the various options. We look forward to your inquiry! If you have any further questions about our pallet trucks, the SCHORR team is at your disposal. You can reach our competent staff by phone or email. We look forward to hearing from you and assisting you with your enquiry.

Stanje: rabljeno, Leto izdelave: 2019, Overview The fill level inspection system was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Technical details: - Capacity: 50,000 bph - Inspection via gamma ray - Krones Checkmat with discharge table and pusher Djdpfel Hxnisx Apljkl

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Dedshx Elfjpfx Aplokl Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.